Lathe Projects

  • Items 1 - 24 of 81
  • Page:
    1. 1
    2. 2
    3. 3
  1. Starting Out Woodturning, DVD

    Starting Out Woodturning, DVD

    …aims to remove much of the mystique surrounding this popular craft. It tackles a wide range of subjects - including selecting wood, learning the lathe, using and caring for the basic tools and applying finishes- and guides viewers through three elementary projects-a bud vase, a goblet, and a bowl.…

    1 Review(s)
    $30.49
  2. Turning Projects, Fine Woodworking DVD

    Turning Projects, Fine Woodworking DVD

    …woodworker's shop.* Learn how to select wood for projects; make a useful carver's mallet; work end grain by making a small bowl; turn a trivet and hollow vessel; support a long, thin spindle; turn a perfect sphere and beads; and sand and finish on the lathe.* Richard Raffan is an internationally…

    3 Review(s)
    $19.95
  3. Rockler Coffee Scoop Turning Kit

    Rockler Coffee Scoop Turning Kit

    For coffee lovers, this is a turning project that will bear fruit every morning, and the heft of the scoop and hand-turned handle will be a daily pleasure for years to come. One scoop is precisely calibrated for the perfect cup of joe. Handle blank not included. Whether you prefer Coffee and Cream…

    1 Review(s)
    $10.99
  4. Maple Rough Turning Blank - Baseball Bat Blank: Nominal = 2-3/4"+ D by 37" L

    Maple Rough Turning Blank - Baseball Bat Blank: Nominal = 2-3/4"+ D by 37" L

    Turn your own custom baseball bat! Put one of these cylindrical blanks on your lathe and fashion a bat with the length, weight, and shape of your choosing. Also great for any other furniture project or use for custom Pepper mills. These are both economy grade material with some minor imperfections.…

    11 Review(s)
    $19.99
  5. Woodworker's Journal Turning Projects CD

    Woodworker's Journal Turning Projects CD

    …picking the right lathe, safety tips, sharpening basics and 14 great projects. Bonus: "20 Great Turning Tricks" and "11 Chucks for Your Lathe" featuring everything you need to know about common (and uncommon) turning chucks! Articles/Projects included on this CD:* Choosing Your Lathe* Our Top Ten…

    $4.99
  6. Ready-to-use Turning Stock-2" x 2" x 30"

    Ready-to-use Turning Stock-2" x 2" x 30"

    The ready-to-use turning stock is square, rough sawn and ready for the lathe. Stock is ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in 30" lengths. Choose from cherry, maple, oak, or walnut. May include sap wood. Technical…

    10 Review(s)
    From: $9.99
  7. Face Plates

    Face Plates

    …other lathes. Great for small to medium sized projects. Mount the plates to a wide variety of lathe spindles just by changing the threaded insert. They fit Delta, Jet and other lathes. Great for small to medium sized projects. Requires a 1" x 8 TPI insert (#22432 Sold Separately) to fit your lathe.

    2 Review(s)
    $29.99
  8. Beer Tap Component Hardware - Beer Tap Ferrules

    Beer Tap Component Hardware - Beer Tap Ferrules

    ''Turn'' your beer taps into one-of-a-kind masterpieces with a bit of creativity, a quick spin on the lathe, and this high quality hardware. Beer tap ferrules are used to attach your turned wood handle to your beer tap faucet. Add elegance to your tap setup when you combine a desired ferrule with…

    1 Review(s)
    $4.99
  9. CrushGrind Mill Mechanisms-Mill Mechanisms

    CrushGrind Mill Mechanisms-Mill Mechanisms

    …your turning with these innovative mill mechanisms! These innovative salt, pepper and spice mill mechanisms allow you to turn your own mill on the lathe! Each mill features a ceramic grinding mechanism and bottom-mounted locking grind adjustment knob. Snap-in fittings do not require the use of metal…

    9 Review(s)
    $19.99
  10. The Complete Guide to Turning Pens & Pencils, Book

    The Complete Guide to Turning Pens & Pencils, Book

    …step-by-step photographs showing how to make 12 pens and three pencils. Project skill requirements range from basic to intermediate to advanced, with some projects only requiring a short amount of time with a standing lathe or even a small, portable model. Hall clearly presents detailed information…

    $24.95
  11. Micro-Mesh Cushioned Abrasives

    Micro-Mesh Cushioned Abrasives

    Washable and reusable abrasives are great for sanding small projects on the lathe! Unique cushioning design results in extended abrasive life, the best surface finish possible, and fewer steps. Conforms to the shape while providing even pressure against the surface. Backed with a flexible cloth,…

    7 Review(s)
    From: $18.99
  12. Wooden Bowls from the Scroll Saw

    Wooden Bowls from the Scroll Saw

    Make several types of beautiful wooden bowls with just your scroll saw! Craft custom wooden bowls and more without a lathe or turning tools. Additional projects include a vase, a ginger jar and a candy dish. 128 pages.

    $19.95
  13. Razor Handle Hardware Kit-Razor Handle Hardware Kit

    Razor Handle Hardware Kit-Razor Handle Hardware Kit

    …the razor is about 5/8" in diameter.* Quick-release button allows easy razor blade changes.* Accepts Gillette Mach 3 shaving cartridges.* Use our 7mm Mandrel A (43537, sold separately) for turning on the lathe.* Turn with the Razor Handle Bushing Set (43637, sold separately below) andMandrel A.

    1 Review(s)
    $8.99
  14. Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    …or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish. See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:* Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your…

    $19.99
  15. Woodturner's Multi-Roll Sanding Pack

    Woodturner's Multi-Roll Sanding Pack

    …Includes four rolls of J-weight, cloth-backed sandpaper in 150, 240, 320, 400 and 600 grits.* Great for sanding on the lathe, plus can be used for any other woodworking project that requires a small piece of sandpaper.* Impregnated with aluminum oxide for long life.* Each roll is 1" wide x 20' long.

    2 Review(s)
    $19.99
  16. Behlen Woodturner s Finish

    Behlen Woodturner s Finish

    Quickly create a stunning, professional, high-gloss look for your small turning projects. Ideal for spindles, lamp bases, pool cues, pens and more! Technical Details:* 16 oz. bottle* Simply apply and buff while your project is on the lathe* May be applied to raw wood or cured finish

    $22.99
  17. Bottle Stopper Mandrel

    Bottle Stopper Mandrel

    …provides an easy way to chuck that small turning blank onto your lathe. Just drill a hole into the bottle stopper blank, screw the threaded end of the mandrel into the blank, then chuck the smooth end of the mandrel onto your lathe. The threads of the mandrel match the threads on the Chrome Bottle…

    $9.59 $4.79

    SAVE 50%

  18. Ready-to-use Turning Stock-2" x 2" x 18"

    Ready-to-use Turning Stock-2" x 2" x 18"

    The ready-to-use turning stock is square, rough sawn and ready for the lathe. Stock is ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in 18" lengths. Choose from cherry, maple, oak, or walnut. May include sap wood. Technical…

    10 Review(s)
    From: $5.99
  19. Lathe Duplicator

    Lathe Duplicator

    …turned projects. This Lathe Duplicator attaches easily to almost any floor-model lathe, and the handwheel allows for smooth operation while cutting.* Will duplicate to a maximum length of 39" (depending on the lathe used)* Maximum duplication depth-of-cut of 2-3/8"* Suitable for lathe with a turning…

    14 Review(s)
    $331.99
  20. Nova 1624-44 16'' x 24'' Lathe

    Nova 1624-44 16'' x 24'' Lathe

    …Nova 1624 Lathe boasts the most power, versatility and features of any comparable mid-range lathe. Its swiveling headstock rotates a full 360°, and locks at any position for outboard turning of large items. The powerful 1.5 HP motor delivers 50% more power than comparable lathes, and features…

    $1,399.99
  21. Jet JWL-1221VS Bed Extension (719201)

    Jet JWL-1221VS Bed Extension (719201)

    Extend the turning capacity of the JET 1221VS 12" x 21" Variable Speed Wood Lathe (45937, sold separately) to 43" for larger projects.

    $199.99
  22. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …quality modular turning tool that accepts a variety of interchangeable cutters, allowing you to use a single tool for a wide variety of turning projects. The TurnMaster's solid 3/4" steel shank is flattened on the bottom for stability, and the patented TurnMaster head can be rotated to three…

    From: $108.99
  23. Ceiling Fan Pull Chain Turning Kit-Accessories

    Ceiling Fan Pull Chain Turning Kit-Accessories

    …the Pull Chain Turning Kit for ceiling fans. Simply drill your blank (sold separately), install the brass tube into the blank, and turn it on your lathe with Mandrel "A" (43537, sold separately). The included chain clips right onto the existing one. Technical Details:* Ceiling Fan Pull Chain Turning…

    6 Review(s)
    From: $5.69
  24. Chrome Bottle Stopper Hardware Kit

    Chrome Bottle Stopper Hardware Kit

    …onto your lathe. Technical Details:* Chrome Bottle Stopper measures 3-1/8" long (without threaded stud) x 3/4"W.* Chuck shank measures 0.288" in diameter x 1-1/2" long.* Threaded stud measures 0.237" in diameter x 1-3/16" long, and is adjustable within the Bottle Stopper for the desired projection.*

    1 Review(s)
    $4.99 $3.49

    SAVE 30%

  • Items 1 - 24 of 81
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X