Lathe Tool Rest

  • Items 1 - 24 of 32
  • Page:
    1. 1
    2. 2
  1. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    5 Review(s)
    From: $19.99
  2. Nova Tool Rest

    Nova Tool Rest

    …as possible. These Nova tool rests are made of cast iron for excellent rigidity, and come with a standard 1"" shank to fit any Nova Lathe. Nova 12" (300mm) Tool Rest (TR300/1):* Ideal for larger work where you want more mobility without having to readjust.* Fits all lathes with a 1" (25mm)…

    From: $26.99
  3. Excelsior Mini Lathe

    Excelsior Mini Lathe

    …to 38-1/2", just use the optional Mini Lathe Bed Extension (32307) (Sold Separately). * Powerful 1/2 HP motor* Solid cast iron base* Spur center on headstock* Ball-bearing live center on tailstock* Heavy-duty knockout bar for spur center* 6" tool rest* 3" face plate* 5 different speeds: 760,…

    47 Review(s)
    $299.99 $199.99

    SAVE 33%

  4. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $108.99
  5. Nova Soft Jaw Set

    Nova Soft Jaw Set

    …both sides and on the end.* Recommended bevel angle is about 70 degrees.* When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch.* Run your lathe at a speed between 1700 and 2000 rpm for best cutting.* You must take extra care when machining…

    $18.99
  6. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …larger lathes.* The base of the MultiRest has independently adjustable spacer blocks that provide a secure fit on lathe beds with way sizes from 1" to 4.5" in width.* Multi-ring structure creates great rigidity while keeping the tool's weight to half that of a comparable full steel rest.*

    $359.95
  7. Jet® 16'' x 42'' Wood Lathe 2HP

    Jet® 16'' x 42'' Wood Lathe 2HP

    …and tool rest base without having to use tools* Hollow tailstock allows you to perform long hole boring for lamps and other vessels* Special cast-in webbings in legs accept 2 x 4's or a 2 x 12 to construct a solid tool or sandbag shelf* Tool storage basket conveniently holds chisels and other tools

    $2,649.99
  8. Nova Comet II Versaturn Grinding Wheel Attachment

    Nova Comet II Versaturn Grinding Wheel Attachment

    …and tool rest. * For use with the Nova Comet II Midi Lathe (46457, sold separately).* Easy to install and remove with the required Versaturn Coupler (48026, sold separately).* Variable speed adjustment on Comet II Lathe reduces tool edge burn.* 6" x 3/4" white-stone wheel.* Adjustable tool

    $52.49
  9. Nova 57073 Outrigger Accessory for 2024 Lathe

    Nova 57073 Outrigger Accessory for 2024 Lathe

    …vibration-free performance. Note: Tool rest is not included (the outrigger accepts the same tool rest that comes with the 2024 lathe). * Fits Nova DVR 2024 lathe only (49055, sold separately).* Handles work up to 33" in diameter.* Space saving - does not add to lathe footprint.* Very quick and…

    $299.99
  10. Lathe Tool Holder

    Lathe Tool Holder

    …your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.* 12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection…

    14 Review(s)
    $27.99 $19.99

    SAVE 29%

  11. Carter Hollow Roller™ Vessel Turning System

    Carter Hollow Roller™ Vessel Turning System

    …all size lathes from mini's to full size* Made in USAMounting Studs Necessary for Adapting Roller System to Lathe:* 45036 - Mounting Stud Works with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool rest post *…

    1 Review(s)
    $358.99
  12. Powermatic® Wood Lathe 2HP

    Powermatic® Wood Lathe 2HP

    …chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has improved locking on a new profile tool rest that can accommodate an optional dust hood assembly that travels with the tool rest. Additional features include a set of dead centers to hold a spindle for…

    $3,999.99
  13. Laguna Mini Lathe Banjo Support Bracket

    Laguna Mini Lathe Banjo Support Bracket

    Outside Banjo Support Bracket for Laguna REVO 10 x 16 Mini Lathe. The Banjo Support Bracket is an accessory attachment for the Laguna REVO 10 x 16 Mini Lathe (#48234, sold separately). The bracket bolts onto your lathe to move the tool rest further away from the tail stock, increasing the bowl…

    $49.99
  14. Nova 27007 Tool Rest Collar

    Nova 27007 Tool Rest Collar

    …Nova Tool Rest Collar acts as a stop collar for your Nova tool rest. It slides onto the tool rest shank, and maintains a fixed, repeatable height so you don't lose your height adjustment when you angle the rest for different angles of approach. 1" internal diameter fits many common tool rest models.…

    $15.99
  15. Jet® 12'' x 35.5'' Wood Lathe with Stand

    Jet® 12'' x 35.5'' Wood Lathe with Stand

    …easily, this lathe can maintain consistent rpm through a much wider range of turning situations. Heavy-duty cast-iron lathe bed adds stability while limiting vibration during operation. Best of all, you can adjust the headstock, tailstock and tool rest base without having to use tools.* Headstock…

    3 Review(s)
    $919.99
  16. Robert Sorby TurnMaster Shanks

    Robert Sorby TurnMaster Shanks

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $99.99
  17. Rockler Round Carbide Mini Turning Tool

    Rockler Round Carbide Mini Turning Tool

    …the tool rest.* The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Technical Details:* Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.* Total overall length of Mini Turning Tool is…

    1 Review(s)
    $69.99
  18. Jet® JWL-1015 10'' x 15'' Wood Lathe

    Jet® JWL-1015 10'' x 15'' Wood Lathe

    …6* Spindle speeds: 500, 840, 1240, 1800, 2630 and 3975 RPM* Number of indexing positions: 24* Distance between centers: 15-1/2"* Swing over tool rest base: 7-5/16"* Swing over bed: 10"* Spindle thread: 1"-8TPI* Spindle bore: 3/8"* Taper in tailstock spindle: MT2* Tailstock spindle travel: 2"*…

    $479.99
  19. Carter Hollow Roller™ Mounting Stud 1000-45

    Carter Hollow Roller™ Mounting Stud 1000-45

    …1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Delta…

    $29.99
  20. Carter Hollow Roller™ Mounting Stud 1125-45

    Carter Hollow Roller™ Mounting Stud 1125-45

    …45 & 90 lathes and most lathes with a 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest

    $24.99
  21. Nova Outrigger Lathe Accessory

    Nova Outrigger Lathe Accessory

    …performance. Note: Tool rest is not included (the outrigger accepts the same tool rest that comes with your lathe). * Fits Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). * Handles work up to 29" (740mm) in diameter. * Space saving - does not add to lathe footprint. *…

    $284.99
  22. Nova DVR 2024 20'' x 24'' Lathe

    Nova DVR 2024 20'' x 24'' Lathe

    …10 presets for favorite speed settings.Specifications:* 2HP 220v intelligent DVR motor.* 100 - 5000 RPM variable speed.* 20" swing over bed.* 24" distance between centers* Drive spindle: 1-1/4" 8 TPI, RH Thread.* #2MT self-ejecting tailstock.* 12" tool rest.* 3" faceplate.

    $3,149.99
  23. Jet® 14'' x 42'' Wood Lathe with Stand

    Jet® 14'' x 42'' Wood Lathe with Stand

    …tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform long hole boring for lamps and other vessels* Special cast-in webbings in legs accept 2 x 4's or a 2 x 12 to construct a solid tool or sandbag shelf Standard Equipment* 12" tool rest* 6" faceplate* Spur…

    $1,429.99
  24. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Technical Details:* Ideal for use as a parting tool, and for tight profiles.* Total overall length of Mini Turning Tool is approximately 13-1/2".*…

    $69.99
  • Items 1 - 24 of 32
  • Page:
    1. 1
    2. 2
Feedback X