Lathe Tools

  • Items 1 - 24 of 125
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    …between the different tools. * Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles. Overall length of the diamond cutter is 1-1/8". Angle of diamond cutter is approximately 35 degrees.* Square Carbide Mini Turning Tool is ideal for flat or convex…

    6 Review(s)
    $189.99 $119.99

    SAVE 37%

  2. Delta 46-625 6-Piece Lathe Turning Tool Set

    Delta 46-625 6-Piece Lathe Turning Tool Set

    Delta's 6-Piece Lathe Turning Tool Set is excellent for both entry-level and advanced turners. And don't let the scale of the photo fool you—at 18'' long, these are high-quality heavy-duty tools. The carefully contoured solid wood handles fit comfortably in your hand, and at 11'' long, provide…

    $205.99
  3. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    …for lathe and two choices of morse tapers. Use this drill chuck and either the #1 Morse taper or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to hold…

    9 Review(s)
    From: $16.99
  4. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    5 Review(s)
    From: $19.99
  5. Rockler Round Carbide Mini Turning Tool

    Rockler Round Carbide Mini Turning Tool

    …handles feature molded rubber for a secure, effortless grip and excellent ergonomics. Also Available from Rockler:* Diamond Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set Note: carbide cutters are not interchangeable between the different tools.

    1 Review(s)
    $69.99
  6. Crown 5 Piece Full Size Turning Set

    Crown 5 Piece Full Size Turning Set

    With five of the most popular turning tools, this set is perfect for the beginning wood turner. Technical Details* Pre-honed for immediate use* Perfect for the beginning wood turner* High-speed steel blades will hold an edge and last a long time* Each tool measures approx. 15" long* Made in England

    4 Review(s)
    $267.99
  7. Robert Sorby Easybeader Woodturning Tools

    Robert Sorby Easybeader Woodturning Tools

    The easybeader is a unique yet simple tool for cutting a series of consistent and regular beads. Originally conceived by a production turner it allows for easy replication of designs like bee-hive boxes, and honey dippers. Because of its shape the turner can move quickly from one bead to the next…

    From: $45.49
  8. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Diamond Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    1 Review(s)
    $69.99
  9. Oneway Scroll Chuck System

    Oneway Scroll Chuck System

    2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening! ONEWAY chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Chucks were designed to meet most turning needs.…

    $195.29
  10. Excelsior Mini Lathe

    Excelsior Mini Lathe

    …capacity to 38-1/2", just use the optional Mini Lathe Bed Extension (32307) (Sold Separately). * Powerful 1/2 HP motor* Solid cast iron base* Spur center on headstock* Ball-bearing live center on tailstock* Heavy-duty knockout bar for spur center* 6" tool rest* 3" face plate* 5 different speeds:…

    47 Review(s)
    $299.99 $199.99

    SAVE 33%

  11. Robert Sorby 3-Piece Pen Turning Set

    Robert Sorby 3-Piece Pen Turning Set

    Create pens, lace bobbins, or other small decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! * Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemaster* Designed for use on a mini lathe or for work on smaller projects* Each tool has an overall length of 10"

    $89.99
  12. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $108.99
  13. Diamond Carbide Turning Tool Replacement Cutter - D1

    Diamond Carbide Turning Tool Replacement Cutter - D1

    …wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Diamond Carbide Mini Turning Tool or the Diamond Carbide Pen Turning Tool (both sold separately) to get smooth finishes in detailed areas, such as those in spindle turnings! Technical Details:* Ideal for…

    $17.99
  14. Nova Soft Jaw Set

    Nova Soft Jaw Set

    …both sides and on the end.* Recommended bevel angle is about 70 degrees.* When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch.* Run your lathe at a speed between 1700 and 2000 rpm for best cutting.* You must take extra care when machining…

    $18.99
  15. Spindle Gauge

    Spindle Gauge

    Use this handy spindle gauge to check turned diameters on your lathe. Also great for a quick check of dowel diameters from 1/8" to 1". The spindle gauge has 16 increments of 1/8" per increment. Technical Details * Check spindle diameters from 1/8" to 1" * Perfect for checking dowel diameters * 16…

    0 Review(s)
    $6.99
  16. Turning Wood with Carbide Tools, Book

    Turning Wood with Carbide Tools, Book

    …tips, turning tools have a taken a quantum leap forward. Carbide-tipped turning tools are safer, faster, easier and more efficient than traditional tools, which must be ground and reground to one of dozens of nonstandard profiles. But how do woodturners get the most out of these new tools? "Turning…

    $21.95
  17. Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    The 1221VS is different from anything JET has made before. In truth, it's different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept: control. Features:* Free one-year online AAW…

    2 Review(s)
    $799.99
  18. Stock Center Finder

    Stock Center Finder

    Works quickly and accurately to locate the center of stock for turning on a lathe or other purposes. No need for special calculations. This easy-to-use finder has no moving parts, so your measurements will be simple and consistent. Technical Details* Transparent yellow tinted plastic* Maximum 8"…

    6 Review(s)
    $9.79
  19. Rockler Round Carbide Turning Tool Replacement Cutter -R1

    Rockler Round Carbide Turning Tool Replacement Cutter -R1

    …wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Round Carbide Mini Turning Tool or the Round Carbide Pen Turning Tool (both sold separately) to get smooth finishes on concave surfaces! Technical Details:* Ideal for giving you a smooth finish on…

    $17.99
  20. Work Sharp™ WS3000 Tool Sharpener

    Work Sharp™ WS3000 Tool Sharpener

    …* Work Sharp unit * Two tempered glass wheels * See-through slotted wheel for underside sharpening of carving and lathe tools * Top tool rest for easy freehand sharpening of larger tools * Crepe stick for cleaning abrasives * PSA abrasive kit (150mm to be adhered to glass wheels: P120 ceramic oxide,…

    54 Review(s)
    $199.99
  21. Powermatic® Wood Lathe 2HP

    Powermatic® Wood Lathe 2HP

    …chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has improved locking on a new profile tool rest that can accommodate an optional dust hood assembly that travels with the tool rest. Additional features include a set of dead centers to hold a spindle…

    $3999.99
  22. Nova Acruline 2MT Alignment System

    Nova Acruline 2MT Alignment System

    …useful on lathes with a pivoting headstock, which should be realigned when the headstock is moved back to the inline position. The #2 morse tapers fit most brands, but check the manual for your specific lathe to find the morse taper size. * 2MT alignment tool is suitable for all lathes with a #2…

    $18.99
  23. Carter Hollow Roller™ Mounting Stud 1125-45

    Carter Hollow Roller™ Mounting Stud 1125-45

    …& 90 lathes and most lathes with a 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest…

    $24.99
  24. Mini Jumbo Jaws for Oneway Scroll Chuck System

    Mini Jumbo Jaws for Oneway Scroll Chuck System

    …diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo Jaws can hold an infinite…

    $102.99
  • Items 1 - 24 of 125
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X