Lathe Wood Turning

  • Items 1 - 24 of 212
  • Page:
    1. 1
    2. 2
    3. 3
  1. Nova Comet II 12'' x 16-1/2'' Midi Lathe

    Nova Comet II 12'' x 16-1/2'' Midi Lathe

    …In addition, Nova's unique Versaturn™ Adaptable Technology, paired with the optional accessory attachments, transforms the lathe into an all-in-one wood turning and woodworking system. Features of the Nova Comet II:* Electronic variable speed motor offers a wide RPM range from 250 to 4000 RPM…

    2 Review(s)
    $499.99
  2. Lathe Duplicator

    Lathe Duplicator

    turned projects. This Lathe Duplicator attaches easily to almost any floor-model lathe, and the handwheel allows for smooth operation while cutting.* Will duplicate to a maximum length of 39" (depending on the lathe used)* Maximum duplication depth-of-cut of 2-3/8"* Suitable for lathe with a turning

    14 Review(s)
    $331.99
  3. Jet® 12'' x 35.5'' Wood Lathe with Stand

    Jet® 12'' x 35.5'' Wood Lathe with Stand

    …machine - the JET JWL-1236 is a dream tool for any lathe enthusiast. Featuring a 3/4-hp motor that handles increased capacities easily, this lathe can maintain consistent rpm through a much wider range of turning situations. Heavy-duty cast-iron lathe bed adds stability while limiting vibration…

    3 Review(s)
    $919.99
  4. Nova Chuck Jaw Sets

    Nova Chuck Jaw Sets

    Choose the jaw set that best fits the needs of your turning project! Nova jaws boast superb holding power when matched with the appropriate workpiece. They cut into the wood, grip firmly in both contraction and expansion mode and provide high tear out strength. These jaws fit all of the Nova chucks,…

    From: $36.99
  5. Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    …made before. In truth, it's different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept: control. Features:* Free one-year online AAW membership with purchase* Unrivaled speed…

    2 Review(s)
    $799.99
  6. Ready-to-use Turning Stock-2" x 2" x 18"

    Ready-to-use Turning Stock-2" x 2" x 18"

    …ready-to-use turning stock is square, rough sawn and ready for the lathe. Stock is ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in 18" lengths. Choose from cherry, maple, oak, or walnut. May include sap wood. Technical…

    10 Review(s)
    From: $5.99
  7. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    …or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils. Note: Chuck shown with a Morse Taper installed

    9 Review(s)
    From: $16.99
  8. Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    …versatility to turn both small bowls and spindles with ease. The lathe is available in either the standard version, with six fixed spindle speeds, or in the variable speed version, with three adjustable speed ranges. When you're ready to turn your ideas into reality, the Jet 1015 mini lathe is a…

    $579.99
  9. Robert Sorby Easybeader Woodturning Tools

    Robert Sorby Easybeader Woodturning Tools

    The easybeader is a unique yet simple tool for cutting a series of consistent and regular beads. Originally conceived by a production turner it allows for easy replication of designs like bee-hive boxes, and honey dippers. Because of its shape the turner can move quickly from one bead to the next…

    From: $45.49
  10. Rockler Coffee Scoop Turning Kit

    Rockler Coffee Scoop Turning Kit

    …roasted coffee beans, turning these blanks will fill your shop with the aroma of freshly ground coffee. Turning blanks sold separately. Technical Details:* Scoop holds one tablespoon.* High quality chrome plated steel with unique design.* Stud fits directly into the turned handle, simply drill a…

    1 Review(s)
    $10.99
  11. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …MultiRest™ provides three strong, helping hands for the most challenging of turnings: big bowls, long vessels, and narrow spindles. Slide the support wheels up against your turning project and flip on the lathe to enjoy unequaled stability and whisper-quiet operation. Each ball-bearing roller…

    $359.95
  12. Robert Sorby Stebcentre with #2 Morse Taper

    Robert Sorby Stebcentre with #2 Morse Taper

    …novice turner by allowing you to vary the degree of bite to the point where kick back of the turning chisel is eliminated. The Stebcentre may also be removed without the need to stop and re-start the lathe. Simply wind back the tail stock and the piece can be withdrawn safely.Size refers to drive…

    From: $69.99
  13. Jet® 14'' x 42'' Wood Lathe with Stand

    Jet® 14'' x 42'' Wood Lathe with Stand

    This mid range lathe offers mechanical variable speed along with a headstock that pivot as well as slide to the end of the bed for outboard turning capabilities.* Reeves drive pulley system allows quick variable speed changes from 450 to 3,000 RPM* Heavy-duty cast-iron lathe bed adds stability while…

    $1,429.99
  14. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    5 Review(s)
    From: $19.99
  15. Woodworker's Journal Turning Projects CD

    Woodworker's Journal Turning Projects CD

    Lathe Steady Rest* Hand-Turned Gavels* Pen Turning Basics* Turning Green Wood* Lathe Sanding Secrets* Starting Up in Woodturning* Finished Green Turning* The Soft Underbelly of Bowls* How to Turn a Single Barley Twist* Cherry Bedside Table* Zestful Turnings* Etched-Mirror Turned Jewelry Box* Turned

    $4.99
  16. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    …degrees.* Square Carbide Mini Turning Tool is ideal for flat or convex areas on spindles and pen turnings. Square cutter is 3/8" square.* Round Carbide Mini Turning Tool is ideal for producing a smooth finish on curved, concave surfaces and for general turning applications. Diameter of the circular…

    7 Review(s)
    $189.99 $119.99

    SAVE 37%

  17. Nova G3 Comet II Reversible Chuck

    Nova G3 Comet II Reversible Chuck

    …reverse mode without the risk of unthreading. It is designed for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing lathes, the set screw must be removed. Like the similar Nova G3, this chuck is a four-jaw,…

    $159.99
  18. Lathe Dust Hood

    Lathe Dust Hood

    Lathe dust collection has never been easier! Hood assembly features a hinged viewing shield that can swing up and out of the way. Hood mounts by clamping the bracket to the back of the lathe bed. * Includes convenient mounting bracket that allows easy installation onto many different styles of…

    10 Review(s)
    $24.99 $18.74

    SAVE 25%

  19. Nova Chuck Inserts/Adapters

    Nova Chuck Inserts/Adapters

    lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto your lathe is a simple matter. The insert system also guarantees that you'll still be able to use your Nova chucks, even if you upgrade or change lathes

    $22.99
  20. Robert Sorby 3-Piece Pen Turning Set

    Robert Sorby 3-Piece Pen Turning Set

    Create pens, lace bobbins, or other small decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! * Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemaster* Designed for use on a mini lathe or for work on smaller projects* Each tool has an overall length of 10"

    $89.99
  21. Ash Rough Turning Blank - Baseball Bat Blank: Nominal = 2-3/4"+ D by 37" L

    Ash Rough Turning Blank - Baseball Bat Blank: Nominal = 2-3/4"+ D by 37" L

    Turn your own custom baseball bat! Put one of these cylindrical blanks on your lathe and fashion a bat with the length, weight, and shape of your choosing. Also great for any other furniture project or use for custom Pepper mills. These are both economy grade material with some minor imperfections.…

    11 Review(s)
    $19.99
  22. Wood Lathe Tailstock Center, MT2

    Wood Lathe Tailstock Center, MT2

    Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a…

    $24.99
  23. Nova DVR 2024 20'' x 24'' Lathe

    Nova DVR 2024 20'' x 24'' Lathe

    …High accuracy and easy swivel.* All the versatility of a full swivel-head lathe with the rigidity and ruggedness of a fixed head wood lathe.* Forward and reverse allows you to achieve superior finishes after turning is complete.* Solid cast-iron construction throughout delivers optimum strength…

    $3,149.99
  24. Jet® 16'' x 42'' Wood Lathe 2HP

    Jet® 16'' x 42'' Wood Lathe 2HP

    …The JET 1642 Wood Lathes strike a perfect balance of versatility, cutting edge technology and performance. The 1642 Lathes have been designed and built to bring the accuracy, capability, durability and value you want in woodworking machinery. Find out all about these Lathes in their informative…

    $2,649.99
  • Items 1 - 24 of 212
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X