Lid Support

  • Items 1 - 24 of 52
  • Page:
    1. 1
    2. 2
    3. 3
  1. Toy Box Lid Supports-Right Mount

    Toy Box Lid Supports-Right Mount

    …Calculating the Number and Rating of Lid Supports Use the following formula to determine the optimal number and rating of lid supports: Lid width (front to back) x lid weight in pounds / 2 = Inch-lbs. of support required. Example, using an 18" wide lid weighing 12 lbs: (18 x 12)/2 = 108. Therefore,…

    105 Review(s)
    $10.29
  2. Soft Down Lid Support

    Soft Down Lid Support

    Lids lower gently--never crushing fingers. Support opens lids to a maximum angle of 105° and is 8-7/8" long overall. They have nickel plated steel arms with cream colored plastic housing. Compact design makes these supports ideal for installing in tight places. Use one support per 43 inch/lbs.…

    24 Review(s)
    $27.29
  3. Adjustable Lid Support

    Adjustable Lid Support

    …number 4 Allen wrench for lids or drop fronts up to 20 lbs. The angle opening can be set at 75 degrees or 90 degrees depending on how brackets are mounted. It's even demountable: Brackets can be mounted without the support arm attached, and the support arm can be removed! Lid or drop-front requires…

    5 Review(s)
    $24.99
  4. Toy Box Lid Supports-Back Mount

    Toy Box Lid Supports-Back Mount

    …Calculating the Number and Rating of Lid Supports Use the following formula to determine the optimal number and rating of lid supports: Lid width (front to back) x lid weight in pounds / 2 = Inch-lbs. of support required. Example, using an 18" wide lid weighing 12 lbs: (18 x 12)/2 = 108. Therefore,…

    105 Review(s)
    $10.29
  5. Friction Lid Supports-Straight

    Friction Lid Supports-Straight

    Straight Friction - Reversible lid support uses a durable nylon bearing to create friction for a controlled lid descent. Brass finished steel. Adaptable for left or right hand operation. 6" nominal length. Price for one support.

    2 Review(s)
    $6.79
  6. Trunk Lid Support-Select finish

    Trunk Lid Support-Select finish

    Designed for trunks and chests with box style lids. Holds lid secure in open position when needed. Plated steel support measures 6-7/16" center to center and 6-7/8" long overall. 7/16" wide. Screws included. Price per pair.

    5 Review(s)
    From: $7.99
  7. Lift-O-Mat® Gas Spring Lid Support

    Lift-O-Mat® Gas Spring Lid Support

    Effortless opening of doors and lids! Gas springs are the ideal choice for cabinet doors and lid supports that open upward. You'll get soft and quiet closing, plus smooth motion and stopping. Each set includes two gas springs and four mounting brackets. (Screws not included). Available in Black…

    21 Review(s)
    $48.29
  8. Decorative Chain Support

    Decorative Chain Support

    This decorative chain is the ideal way to support and dress up a box or chest lid. Chain and mounting hardware are brass plated and polished. Measures 7-3/4" long with 5/16" x 1" mounting plates. Technical Details* Brass plated chain and mounting hardware* Chain is 7-3/4" long* Includes #4 x 5/8"…

    11 Review(s)
    $15.39
  9. Large Lid Support

    Large Lid Support

    Great for many uses, such as large boxes and display cases.* Special mounting plates allow for smooth movement.* Measures 9-5/8" overall.

    3 Review(s)
    $5.69
  10. Solid Brass Hardware-Choose right or left hand

    Solid Brass Hardware-Choose right or left hand

    Works as either a lid support or drop front. Study construction. Solid brass with a polished, lacquered finish. Dual purpose lid support or drop front. (right and left hand are designated by drop front use as you face the desk). Overall length is 9-3/4" . Each arm is 4-7.8" long.

    9 Review(s)
    $31.49
  11. 6'' Medium-Duty Quiet Action Lid Support

    6'' Medium-Duty Quiet Action Lid Support

    This lid support is made for medium-duty use including toy boxes, window bench seats and cedar chests. Patented friction discs at the pivot point prevent lids from slamming shut. Smooth-movement lowering action is gentle and controlled and will stop and hold in any position. Technical Details* Made…

    10 Review(s)
    $21.99
  12. Friction Lid Supports-Curved

    Friction Lid Supports-Curved

    Curved Friction - Use in cabinets where depth is limited. Works in boxes as shallow as 2-1/2". Brass finished steel. Screws included. 5-1/2" overall. Price for one support.

    2 Review(s)
    $6.79
  13. Easy-Lift Lid Support

    Easy-Lift Lid Support

    By rear-mounting this lid support and placing it at least 6" from the edge of the lid, you'll get added safety and smooth lift-up action. For use on boxes and chests with 3/4" backs. Most lids require only one support, but two can increase the weight capacity. Zinc mounting brackets; black nylon…

    8 Review(s)
    $13.69
  14. Soft Down Lid Supports

    Soft Down Lid Supports

    …60-86" /pound per support and 121-173" /pound per pair (formula: lid wt. x front-to-back size ÷ 2 =" /pounds), these supports offer the security of gentle descent for applications with top-opening flap door. Opening to 70°, they are ideal for both overlay and inset lids. Requires 5-1/8" x…

    18 Review(s)
    $25.49
  15. Soft Down Drop Front Support

    Soft Down Drop Front Support

    Soft Down Drop Front Desk Support. Lids lower gently - never crushing fingers. A speed adjustment screw lets you control the rate of descent. Support opens drop front to a maximum angle of 90°. They have nickel plated steel arms with umber colored plastic housing.

    6 Review(s)
    $24.69
  16. Stopmatic Support With Catch

    Stopmatic Support With Catch

    …controls lowering of the drop front. Comes with magnetic catch to help keep door closed. Can be used in left or right hand installations by reversing position of foot and catch as needed. Nickel plated die-cast steel. Includes screws. Recommended for lids of 14" minimum height to 18" maximum height.

    5 Review(s)
    $15.99
  17. HS Series S/S LID Support, Medium L=240MM (HS-210)

    HS Series S/S LID Support, Medium L=240MM (HS-210)

    * Material: 304 Stainless Steel, Polyamide* Finish: Satin* Left or right hand installation* Screws not includedFinish: SatinLeft or right hand installation.Screws not included * Catalog Page (PDF format)

    $12.99
  18. Basic Economy Drop Front Support

    Basic Economy Drop Front Support

    Simple elbow jointed arm is easy to install. Short arm is 5" and long arm is 6". Made of brass-plated steel. Price for each. Great for straight or slant front secretaries.

    2 Review(s)
    From: $10.39
  19. Lid-Stay Torsion Hinge Lid Support, Satin Nickel

    Lid-Stay Torsion Hinge Lid Support, Satin Nickel

    …inch-pound ratings. Screws included. * Support any size lid by simply adding more hinges.* Safe for toy box lids and perfect for cedar chests.* Unique torsion mechanism holds lid in any position.* Hinges can be installed for both overlay and flush fitting lids.* Torsion mechanism is tested to 25,000…

    40 Review(s)
    From: $24.99
  20. Lid-Stay Torsion Hinge Lid Supports  (CLOSEOUT)

    Lid-Stay Torsion Hinge Lid Supports (CLOSEOUT)

    Similar to hinges in laptop computers, these heavy-duty cast-zinc hinges allow virtually any size lid to open smoothly, hold its position, and then easily close all with little effort and no additional hardware! Now available in two attractive finishes, Champagne and Rustic Bronze, to complement…

    1 Review(s)
  21. Self Balancing Lid Support-Select"  lbs. weight you need

    Self Balancing Lid Support-Select" lbs. weight you need

    An adjustable spring loaded support holds lids in open position. Surface mounts only 4-1/2" from back of the cabinet. Statuary bronze finish. (Lid weight times front to back size) divided by 2 equals" pounds range. Use on toy boxes with 3/4" thick backs. Price per pair.

    2 Review(s)
    $38.59
  22. Lapcon Cabinet Lid Support-Heavy-Duty

    Lapcon Cabinet Lid Support-Heavy-Duty

    …soft door closing with adjustable speed. Supports install simply along the edge of the cabinet. Left and right-handed models function individually or as pairs for different doors based on torque calculation (door height x 1/2 x door weight). Heavy-duty supports are rated for 65-87 in-lbs of torque.…

    5 Review(s)
    $38.49
  23. Small Box Lid Support

    Small Box Lid Support

    Reversible support is made of attractive brass plated steel. Note: For use on box lids only, not for use with flat top lids.

    3 Review(s)
    $8.39
  24. Toy Box Lid Supports-Left Mount

    Toy Box Lid Supports-Left Mount

    …Calculating the Number and Rating of Lid Supports Use the following formula to determine the optimal number and rating of lid supports: Lid width (front to back) x lid weight in pounds / 2 = Inch-lbs. of support required. Example, using an 18" wide lid weighing 12 lbs: (18 x 12)/2 = 108. Therefore,…

    104 Review(s)
    $10.29
  • Items 1 - 24 of 52
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X