Lifting Leveler

  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
  1. Heavy Duty Lifting Leveler

    Heavy Duty Lifting Leveler

    Lipped mounting bracket works to lift and creates greater stability. Each leveler has load-bearing capacity of 600 pounds. Adjust to within 2-1/4" . Minimum installation height is 3". Requires 5mm hex wrench to adjust. Foot measures 1-1/4" diameter. Bracket measures 2-1/8" high x 2-1/8" wide with…

    40 Review(s)
    $25.99
  2. Heavy Duty Corner Levelers

    Heavy Duty Corner Levelers

    Lift and level even large cabinets or furniture with these heavy duty corner levelers. Stability is assured! Simply mount under cabinet edge or in a kerf, then adjust with a height range of 1" using an Allen wrench (sold separately) through a hole in the cabinet floor. Technical Details:* Load…

    3 Review(s)
    $21.99
  3. FastCap Upper Hand Work Support, Extends from 28'' to 60''

    FastCap Upper Hand Work Support, Extends from 28'' to 60''

    Lifting heavy cabinets is hard enough, let alone holding them in place while you adjust for level and fasten to the wall. The telescoping Upper Hand Work Support is specifically designed for upper cabinets, making cabinet installation faster, easier, and safer! The Upper Hand extends from 28" to 60"…

    5 Review(s)
    $47.29
  4. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-28" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-28" Diameter

    …all the way into the center shaft. * Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top pivot bracket. Pilot drill(1/8" in. dia.) holes and fasten the top pivot with four (4) 1/2 in. x #8 truss head…

    $77.99
  5. Rev-a-Shelf Heavy-Duty Mixer Lift

    Rev-a-Shelf Heavy-Duty Mixer Lift

    Heavy-duty appliance lift mechanism easily raises your mixer to countertop level, giving you the access you need in seconds. Gently pull on the release levers to return the mixer to your cabinet for convenient storage. Shelf not included. Technical Details* Features built-in shock dampers and…

    17 Review(s)
    $111.99
  6. Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    Meet the ultimate router table - complete with a fence, plate, steel cabinet, and a router lift! At 24" x 32" x 1-1/2", the Bench Dog Cast-Iron Router Table is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square…

    2 Review(s)
    $1,249.99
  7. Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    …Router Lift FX for above-table bit height adjustments and bit changes.* The Router Lift FX accepts the following routers: Porter-Cable 690/890 Series, Bosch 1617-16-18, DeWalt 610, 616, 618.* Router Lift FX includes insert ring with 1-1/2" opening.* Featuring 8-points of plate leveling and 2 locking…

    1 Review(s)
    $649.99
  8. Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    …1617-16-18, DeWalt 610, 616, 618. * Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit changes.* Router Lift FX includes insert ring with 1-1/2" opening.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for over five square feet…

    $549.99
  9. Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    …1617-16-18, DeWalt 610, 616, 618.* Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit changes.* Router Lift FX includes insert ring with 1-1/2" opening.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32"" table for over five square feet…

    $399.99
  10. Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    …Router Lift FX for above-table bit height adjustments and bit changes.* The Router Lift FX accepts the following routers: Porter-Cable 690/890 series, Bosch 1617-16-18, DeWalt 610, 616, 618.* Router Lift FX includes insert ring with 1-1/2" opening.* Featuring 8-points of plate leveling and 2 locking…

    0 Review(s)
    $499.99
  11. Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    Meet the ultimate router table - complete with a fence, plate and router lift! At 24" x 32" x 1-1/2", the Bench Dog Cast-Iron Router Table is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square feet of ultra-flat…

    $899.99
  12. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …kit even further, purchase the T-Track Intersection Kit (#22209 - Sold Separately). Bench Cookie Plus® Work Grippers:* Lift, grip, and protect at a higher level with Rockler's Bench Cookie® Plus Work Grippers!* Newly redesigned, these high-friction rubber pads hold your project rock-steady…

    $54.97
  13. Shop-Vac® 5-1/2HP 5-Gallon Heavy-Duty Portable Wet/Dry Vac - 5872410

    Shop-Vac® 5-1/2HP 5-Gallon Heavy-Duty Portable Wet/Dry Vac - 5872410

    5-1/2HP, 5-gallon Shop-Vac® has an Ultra Web® Cartridge Filter to handle drywall dust and a top carry handle for easy lifting and total mobility.* 2-1/2" OD, 2-1/4" ID inlet* The Right Stuff line is ideal for industrial and commercial applications* Ultra Web® Cartridge Filter tackles…

    1 Review(s)
    $92.39
  14. Deluxe Sewing Center Hardware Kit

    Deluxe Sewing Center Hardware Kit

    …Center Hardware Kit and Lift Mechanism Sold Separately)* 33100 - Sewing Machine Lift Mechanism: Designed to lift and lower a sewing machine. Mounts to underside of table top and back of cabinet. Release and latch mechanism lock the sewing machine height at different levels which may be adjusted.…

    24 Review(s)
    $72.49
  15. Deluxe Sewing Center Plan

    Deluxe Sewing Center Plan

    …pins, and brass piano hinges.* 33100 - Sewing Machine Lift Mechanism: Designed to lift and lower a sewing machine. Mounts to underside of table top and back of cabinet. Release and latch mechanism lock the sewing machine height at different levels which may be adjusted. Mechanism can be adjusted to…

    25 Review(s)
    $13.95
  16. Festool CT Midi Dust Extractor

    Festool CT Midi Dust Extractor

    …x 13.5" x 18.5" (440 x 340 x 470 mm)* Weight: 21.4lbs. (9.7kg)* Noise level: 72dB (A)* Power consumption:400-1200 watts/3-10 amps, 120v AC* Maximum suction capacity: 99 CFM (2800 l/min.)* Max. vacuum: 80" static water lift (20000 Pa) Features: * A balance of low weight, small size and container…

    2 Review(s)
    $485.00
  17. Festool CT 36 E Dust Extractor

    Festool CT 36 E Dust Extractor

    …9.5gal./8.9gal.* Depth x Width x Height: 24.8" x 14.4" x 23.4" * Weight: 29.8lbs. * Noise level: 62-71dB (A)* Power consumption: 2.9-10 amps, 120v AC* Maximum suction capacity: 137 CFM * Max. vacuum: 96" static water lift Features:* HEPA filtration frees the air of 99.99% of particulate matter down…

    $675.00
  18. Festool CT 26 E Dust Extractor

    Festool CT 26 E Dust Extractor

    …6.9gal./6.3gal.* Depth x Width x Height: 24.8" x 14.4" x 21.3"* Weight: 28.7 lbs.* Noise level: 62-71dB (A)* Power consumption: 2.9-10 amps, 120v AC* Maximum suction capacity: 137 CFM* Max. vacuum: 96" static water lift Features:* HEPA filtration frees the air of 99.99% of particulate matter down to…

    $625.00
  19. Kreg Precision Router Table Top

    Kreg Precision Router Table Top

    …Edgebanded MDF Top* Easy-Slide™ Micro-Dot Skin* Dual Steel Support-Struts* Heavy-Duty Construction Supports the Largest Routers and Lifts* Combination Miter/T-Slot* Phenolic Insert Platewith Dual Reducing Rings* Unique Bottom-Up Insert Plate Levelers* Porter-Cable Guide Bushing Compatibility

    $179.00
  20. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

    …all the way into the center shaft. * Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top pivot bracket. Pilot drill (1/8" in. dia.) holes and fasten the top pivot with four (4) 1/2 in. x #8 truss head…

    From: $51.49
  21. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-24" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-24" Diameter

    …all the way into the center shaft. * Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top pivot bracket. Pilot drill (1/8" in. dia.) holes and fasten the top pivot with four (4) 1/2 in. x #8 truss head…

    $64.49
  22. Rockler Pro Phenolic Router Table, Fence & Plate

    Rockler Pro Phenolic Router Table, Fence & Plate

    …is CNC machined for incredible flatness and precision.* 24" x 32" table for over five square feet of surface area.* Features 8-points of plate leveling and 2 locking points.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Includes Rockler Pro Fence with…

    2 Review(s)
    $399.99 $299.99

    SAVE 25%

  23. Rockler High Pressure Laminate Router Table, Fence & Plate

    Rockler High Pressure Laminate Router Table, Fence & Plate

    …2-1/2" dust port.* 8-1/4" x 11-3/4" x 1/4" aluminum plate is CNC machined for incredible flatness and precision.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for over five square feet of surface area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety…

    6 Review(s)
    $249.99
  24. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …32"H steel stand.* 8-1/4" x 11-3/4" x 1/4" aluminum plate is CNC machined for incredible flatness and precision.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for over five square feet of surface area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety…

    3 Review(s)
    $349.99
  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
Feedback X