Locking Clamp

  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
  1. Bessey Auto-Adjust Toggle Clamp, Push

    Bessey Auto-Adjust Toggle Clamp, Push

    …baseplate features holes that are sized and spaced for easy, flexible mounting.* Large, soft handle provides maximum comfort with repeated clamping and unclamping.* Swivel pad features removable no-mar plastic cap.* Horizontal handle position when locked means less obstructions while working.

    $24.19
  2. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    …with A and C Series All-In-One Clamp Guides. All-In-One Clamp Guides: * A straight edge guide that's simple to adjust.* Integral clamping jaws and locking lever provide a quick, easy way of clamping the guide.* Four lever positions for variable clamping strength.* Two clearly labeled scales…

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  3. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …full color measuring scales enable outstanding accuracy anywhere along the clamp. Onboard T-Tracks fit select clamp accessories, sold separately. Rigid, lightweight construction makes these clamps a joy to operate. Each clamp is 2-1/2" wide. Contractor Saw Plate and Contractor Router Plate, Stop…

    89 Review(s)
    From: $41.99
  4. Sure-Foot® Aluminum Bar Clamps

    Sure-Foot® Aluminum Bar Clamps

    …allows you to extend any clamp by 48". Details:* Extra wide 2-1/2" foot for exceptional stability* Higher base that raises the bar 1-1/2" above the table for excellent handle clearance* Built-in clamp hook locks onto a 3/4" board eliminating the need to "clamp the clamp" when hanging on a wall

    11 Review(s)
    From: $37.99
  5. QuickSet Pressure Adapters

    QuickSet Pressure Adapters

    …the tedious double-nut fitting on most hold-down toggle clamps! Change depth-of-pressure in seconds with the adjustable rubber foot, and for movement in-and-out along the arm just loosen a single set screw and adjust away. A comfortable locking knob caps it all off.Available in two sizes, 5/16" and…

    8 Review(s)
    $3.99
  6. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …Fit tenon into guide and tap with mallet just enough to start the ring into the end of the tenon. Now you can proceed with installing the tenon into the mortise. Either clamp the joint together or use a mallet, causing the metal ring to seat itself into the tenon, expanding it for a permanent joint.

    2 Review(s)
    $25.49
  7. HL 850 E Planer Bench Unit

    HL 850 E Planer Bench Unit

    …bolts quickly into the the unit and can be clamped to easily and securely to the Festool MFT Multifunction Table for stability. The Bench Unit features a pivoting blade cover, non-skid base for added stability, easy to read depth-setting ring, and locking on/off switch. (Does not include planer or…

    $115.00
  8. Portable Cross Cut Sled with FREE Cutoff Platform

    Portable Cross Cut Sled with FREE Cutoff Platform

    …This platform zeroes out flush to the blade, preventing drop-off pieces from splitting off unpredictably or getting jammed in the throat plate.* Aluminum miter bar has adjustable nylon set screws to ensure a snug fit in the miter track.* Locking clamp on miter bar tightens with a single screw.

    1 Review(s)
    $148.98 $119.99

    SAVE 19%

  9. Rockler Auto-Lock T-Track Clamp

    Rockler Auto-Lock T-Track Clamp

    …the clamp to your T-track* Bottom-mounted alignment pins can be repositioned at 45° for angled clamping* Adjustment screw is easily accessible through a hole in the handle, and adjusts clamping pressure from 10 to 500 lbs* Non-slip pad on base of clamp prevents unwanted shifting* Clamp face…

    1 Review(s)
    $29.99
  10. Mounting Bracket for Auto-Lock T-Track Clamp

    Mounting Bracket for Auto-Lock T-Track Clamp

    …innovative Auto-Lock Clamps can be mounted virtually anywhere, and in any position. Just screw the mounting bracket to your custom jig or fixture at the desired angle, slide in your T-track clamp and you're ready to enjoy the fast, auto-adjust benefits of our Auto-Lock clamps (58616, sold…

    $9.99
  11. Rockler Deluxe Band Clamp

    Rockler Deluxe Band Clamp

    …improved, our Ratcheting Band Clamp has a permanently attached wrench so it's always ready for use. Check out these other new improvements:* Stitched band eliminates fraying* The belt is stitched and crimped to the clamp so it won't come loose when you're really clamping tight* Permanently attached…

    5 Review(s)
    $14.99
  12. Irwin SL300 Quick-Grip Clamp Set

    Irwin SL300 Quick-Grip Clamp Set

    …fast positioning and maximum hand comfort.* High-tech resin construction for light weight and a long clamp life.* Heat-treated, black oxide carbon steel I-Beam Bar for extreme durability.* Protective resin jaw pads are removable.* Patented locking swivel jaw locks/unlocks with a flip of a switch.

    $57.28
  13. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased…

    From: $57.99
  14. All in One Clamp Guide Package, While Supplies Last!

    All in One Clamp Guide Package, While Supplies Last!

    …course, clamps. Expertly engineered, these Contractor Series clamp guides possess some unique features.* Simple to adjust* Features locking clamp pads* Four lever positions for variable clamping strength* Two clearly labeled scales in 1/8" graduations* The perfect woodworking combination clamp and…

    37 Review(s)
    $159.99
  15. Rockler Sure-Foot Plus® 3/4'' Pipe Clamp

    Rockler Sure-Foot Plus® 3/4'' Pipe Clamp

    …won't have to position clamp handle off the edge of a bench.* Clamping face includes holes for mounting pads, cauls, jigs and specialty fixtures.* Built-in clamp hook eliminates need to "clamp the clamp" when hanging on wall.* Four-clutch-plate design provides secure, no-slip lock for the tail stock…

    66 Review(s)
    $18.99
  16. Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To…

    5 Review(s)
    $44.99
  17. Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99
  18. Irwin® Quick-Grip® SL300 Clamps

    Irwin® Quick-Grip® SL300 Clamps

    …fast positioning and maximum hand comfort.* High-tech Resin construction for lightweight and a long clamp life.* Heat-treated, black oxide carbon steel I-Beam Bar for extreme durability.* Protective Resin jaw pads are removable.* Patented locking swivel jaw locks/unlocks with a flip of a switch.

    12 Review(s)
    $26.99 From: $13.49

    SAVE 50%

  19. Rockler Sure-Foot® Aluminum Bar Clamps (4-Pack)

    Rockler Sure-Foot® Aluminum Bar Clamps (4-Pack)

    …lightweight bar clamp!* Includes two 48" Sure-Foot® Aluminum Bar Clamps and two 24" Sure-Foot® Aluminum Bar Clamps* Won't rap your knuckles with these clamps' higher base for greater clearance.* Built-in clamp hook locks on to a 1x board, eliminating need to clamp the clamp when hanging on a…

    1 Review(s)
    $129.99 $69.99

    SAVE 46%

  20. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    …out flush to the blade, preventing drop-off pieces from splitting off unpredictably or getting jammed in the throat plate. Additional features:* Aluminum miter bar has adjustable nylon set screws to ensure a snug fit in the miter track.* Locking clamp on miter bar tightens with a single screw.

    2 Review(s)
    $28.99 $9.99

    SAVE 66%

  21. Micro Jig ZeroPlay® Stop ZP9-S1

    Micro Jig ZeroPlay® Stop ZP9-S1

    More than just a miter stop! Small and versatile, this stop can also lock a jig in place or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits standard 3/4" x 3/8" T-Style miter slots.

    $7.39
  22. 4212 Porter-Cable  12'' Dovetail Jig

    4212 Porter-Cable 12'' Dovetail Jig

    …and dado template, through and box template, dovetail bit, straight bit, two template guides, two lock nuts and T-handle hex wrench.* Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood.* CNC machined aluminum templates provide superior accuracy.* For use…

    $187.99
  23. Carter Accuright® Log Mill™

    Carter Accuright® Log Mill™

    …your bandsaw to cut and square raw wood logs* Heavy-duty steel right angle fence prevents logs from rolling during the cut* Uses a locking jaw on the back and a clamp on the front to secure logs to the mill* Adjustable fence lets you make repetitive cuts or use with a stationary fence on your saw as…

    3 Review(s)
    $139.95
  24. Bessey Auto-Adjust Toggle Clamp, Hold-Down

    Bessey Auto-Adjust Toggle Clamp, Hold-Down

    …baseplate features holes that are sized and spaced for easy, flexible mounting.* Large, soft handle provides maximum comfort with repeated clamping and unclamping.* Swivel pad features removable no-mar plastic cap.* Horizontal handle position when locked means less obstructions while working.

    $21.99
  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X