Long Shank Router Bits

  • Items 1 - 24 of 60
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    15 Review(s)
    From: $13.49
  2. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    …straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life with minimal sharpening. 1/4" shanks.

    11 Review(s)
    From: $13.99
  3. Oneway Termite Hollowing Tool Package

    Oneway Termite Hollowing Tool Package

    …Made from high speed steel.* Bit is held with a set screw in a 7-1/2" shank.* Shank has tensile strength of over 110,000 PSI.* Hardwood handle measures 15-1/2" long .* Total length is 23" without the cutting tip.* To sharpen, simply mount the included point in your router. Mount the termite in the…

    2 Review(s)
    $99.79
  4. 18'' Rockler Router Bit Storage Rack

    18'' Rockler Router Bit Storage Rack

    Keep your supply of router bits organized and easily accessible! This galvanized steel rack features keyhole slots 16" on center to allow easy mounting to wall studs or the side of your router table stand.* Holds 27 1/2" shank bits and 13 1/4" shank bits.* 18" long.

    2 Review(s)
    $15.99
  5. Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    …version of the same kit is available separately (23105) for trimming stock up to 1" thick. Large Bit Kit includes the following:* One 1" diameter bit with 2" long cutters and a 1/2" shank* Two 1" bearings for flush trimming* Three single bearings (7/8", 3/4", and 5/8" in diameter) for trimming…

    5 Review(s)
    $89.99
  6. CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    …lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl and Tray router bit: 1-1/4" diameter; carbide tipped; shear angle; 1/2" shank.* Instructional DVD is 38 minutes long.

    3 Review(s)
    $112.99
  7. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    …1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours! * 1/2" shank for minimal vibration.* Approximately 3-1/2" long overall.*…

    1 Review(s)
    $51.99
  8. Rockler Bullnose Radius Router Bits - 1/2" Shank

    Rockler Bullnose Radius Router Bits - 1/2" Shank

    …round bits, these will not leave a flat in the middle of the stock, and you can complete the profile in a single pass. You can leave the edge perfectly smooth, or select a bit that is sized to leave shoulders on the top and bottom of your stock. Carbide-tipped for an exceptionally long life and…

    From: $29.99
  9. Rockler Crown Moulding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    Rockler Crown Moulding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    This traditional crown molding profile features a 2-1/4" long cutter profile for a deep, detailed architectural appearance. You can also use it for other trim elements, such as for chair rails and case molding. 1-1/4" diameter x 2-1/4" cutter length x 1/2" shank.

    1 Review(s)
    $79.99
  10. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    …coving bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a long useful…

    From: $34.97
  11. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit

    $159.97
  12. Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    With two joinery bits for basic dados and rabbets, plus three bearing-guided edge profiling bits, this five-piece router bit set will cover the bases for both solid structure and visual embellishment. All bits have 1/2" shanks to reduce chatter and provide maximum performance. A convenient storage…

    $149.99
  13. Leigh 7-Piece Router Bit Set

    Leigh 7-Piece Router Bit Set

    …7 carbide tipped bits, each honed with 600 grit diamond wheels for superbly smooth, efficient cutting. 8mm bit shanks are 1-3/4" long to extend through the thickness of the guide fingers. Set includes 4 Through Dovetail bits (1/4", 5/16", 3/8', and 7/16"), and 3 Half-blind bits (10°, 12°,…

    1 Review(s)
    $147.99
  14. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    bit. 1/2-inch shanks. Cuts parts to correct dimension and shape, and applies an edge profile - all in one shot! No need for a bearing guide means no gummed up bearings, and no marks on the edge of your work piece from bearings that don't spin well. All five CNC router bits feature 1/2-inch shanks

    $199.99
  15. Rockler Specialty Molding Router Bit - 2-1/8" Dia x 1" H x 1/2" Shank

    Rockler Specialty Molding Router Bit - 2-1/8" Dia x 1" H x 1/2" Shank

    bit will give you impressive results. Rockler router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long

    $95.39 $29.99

    SAVE 69%

  16. Freud® 99-761 Ogee Rail and Stile Bit Router Bit - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-761 Ogee Rail and Stile Bit Router Bit - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    …Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable…

    2 Review(s)
    $127.47
  17. Rockler Picture-Hanging Keyhole Template

    Rockler Picture-Hanging Keyhole Template

    long slot increases your horizontal adjustability. Use with the 5/8" Short-Shank Guide Bushing (#38756 - Sold Separately), (specially designed for 1/4" template stock) and a 3/8" Hanging Slot Router Bit (#92024 - Sold Separately).* Use double-faced tape (50492) to secure template to workpiece.* Long

    $11.59
  18. 1/2'' to 8mm Collet Adapter

    1/2'' to 8mm Collet Adapter

    …you to use 8mm shank router bits with your 1/2" collet. The collet adapter slips into your existing 1/2" collet, and the router bit is then inserted into the adapter. The expansion slot ensures a tight grip on the router bit shank. With the ability to use 8mm shank router bits, you'll have…

    $8.99
  19. Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    …storage box. All bits are double flute, combining a smooth cut with efficient chip ejection. They can cut up to 1" deep, so they are capable of cutting mortises as well. With carbide tips, they boast a long cutting life with minimal need for sharpening. Sturdy 1/2" shanks reduce chatter for…

    5 Review(s)
    $59.99
  20. Rockler Cove Crown Molding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    Rockler Cove Crown Molding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    …materials. You can recreate this classic 2-1/4" cove molding profile in any material, including exotic hardwoods. Use it alone as a simple, elegant molding, or as a base to build upon for more elaborate moldings. Once the profile is cut, simply chamfer the long edges to complete your molding.

    $84.79
  21. Rockler 2-Pc. Rail/Stile Shaker Cutter Router Bit Set - 1/2" Shank

    Rockler 2-Pc. Rail/Stile Shaker Cutter Router Bit Set - 1/2" Shank

    …our 3-pc. Shaker Raised Panel router bit set (40432, sold separately), which features a matching bevel. Bearing-guided to prevent dips and ensure a perfect fit. Sturdy 1/2" shanks and precision balancing ensure stability while routing, while the high-grade carbide provides a long cutting life.

    $109.99
  22. Freud® 99-762 Shaker Stile and Rail Router Bit - 1-11/16" Dia x 1/2" Shank

    Freud® 99-762 Shaker Stile and Rail Router Bit - 1-11/16" Dia x 1/2" Shank

    Now with Freud's unique, patented Premier Adjustable Rail-and-Stile Router Bit system, you can build cabinet doors in a range of door thicknesses – all with perfectly fitting tenons! This easy-to-use solution produces Shaker-style rail-and-stile doors from 5/8" to 1-1/4" thick. You can adjust…

    $127.47
  23. Freud® 97-254 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank

    Freud® 97-254 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank

    …Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4"…

    $183.47
  24. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    …increased long grain gluing surface also helps to strengthen the joint over a basic rabbet or butt joint. Machining parts with the Lock Miter Bit is easy with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for…

    From: $57.99
  • Items 1 - 24 of 60
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X