Long Stop

  • Items 1 - 24 of 100
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Long Stop for Rockler T-Track System

    Rockler Long Stop for Rockler T-Track System

    …length of the Long Stop spans the joint line, allowing you to easily flush up rails and stiles by butting them against the stop. This is also handy when assembling cope and stick doors. The keyway on the bottom of the Long Stop runs parallel to the stop face. Two other stop styles are available…

    $12.99
  2. Rockler JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    Rockler JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    …fully concealed European-style hinges – with a single setup! The Master Pack includes a 30" rail, two alignment plates, one bit guide and a stop block for positioning the jig on a door. Additional JIG IT® templates (sold separately) can be added for doors requiring three or more hinges.…

    14 Review(s)
    $93.99
  3. Rockler Short Stop for Rockler T-Track System

    Rockler Short Stop for Rockler T-Track System

    …hold your work while belt sanding, hand planing, or scraping dried glue off of a panel. The keyway on the bottom of the Short Stop runs parallel to the stop face. Two other stop styles are available separately: Inline (with keyway perpendicular to stop face) and Long (keyway parallel to stop face).

    $6.99
  4. Rockler Stop Kit for Rockler T-Track System

    Rockler Stop Kit for Rockler T-Track System

    Stops on one end of the board to hold your work while belt sanding, hand planing, or scraping dried glue. Use the Inline Stops to sandwich a board so you can work in either direction. For light clamping pressure, tap some carpenter's shims between one of the Inline Stops. A third style-the Long

    $24.99
  5. Rockler Inline Stop for Rockler T-Track System

    Rockler Inline Stop for Rockler T-Track System

    …shims between one of the stops and you have a very secure holding system for light routing tasks or carving. The keyway on the bottom of the Inline Stop runs perpendicular to the stop face. Two other stop styles are available separately: Short and Long (both with keyways parallel to stop face).

    1 Review(s)
    $6.99
  6. FastCap® Best Fence System for Kapex Miter Saw-Best Fence Systems

    FastCap® Best Fence System for Kapex Miter Saw-Best Fence Systems

    stop system Optional accessories:* Additional 64'' fence section* Custom length fence sections, from 1 foot to 12 feet in length (additional shipping may apply for fences 6 feet long or longer)* Male-male connector for additional fences* Upper Hand support for long fence lengths* Crown molding stop*

    $399.99
  7. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    Clamp Tite Drill Stops are the perfect way to control drilling depth. Unlike stop collars that use a single set screw, the split collar design applies tight, even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and…

    2 Review(s)
    $4.79
  8. Stop Block Kit

    Stop Block Kit

    Set it on the T-slot track for making the same length cuts over and over. You get a 5 star knob, a 1 1/2" long T-slot bolt and a 2" rabbeted stop block. Ideal for use on a drill press table, router table or miter gauge fence.

    2 Review(s)
    $8.19
  9. 105 Degree Stop Hinge-2 Inch

    105 Degree Stop Hinge-2 Inch

    Finish your project with a Jewelry Box Stop Hinge that is both durable and distinctive! This sturdy 105° hinge is an economical alternative to other hinges, easy to affix, and comes with all mounting hardware. Made of durable steel and available in three finishes: Nickel, Oil Rubbed Bronze, or…

    1 Review(s)
    $4.19
  10. 105 Degree Stop Hinge-8 Inch

    105 Degree Stop Hinge-8 Inch

    Finish your project with a Jewelry Box Stop Hinge that is both durable and distinctive! This sturdy 105° hinge is an economical alternative to other hinges, easy to affix, and comes with all mounting hardware. Made of durable steel and available in three finishes: Nickel, Oil Rubbed Bronze, or…

    From: $5.29
  11. 1-3/16" Long Cylinder Lock-Keyed Alike

    1-3/16" Long Cylinder Lock-Keyed Alike

    …is keyed alike. Includes two cams: one for lipped door applications and one for inset and overlay applications. Use the included dual-function stop washers to set the lock for either a 90 degree or 180 degree cam turn. The cylinder lock has a five disc tumbler and is available in a nickel, antique…

    11 Review(s)
    $17.99
  12. 1-3/16" Long Cylinder Lock-Keyed Differently

    1-3/16" Long Cylinder Lock-Keyed Differently

    …keyed differently. Includes two cams: one for lipped door applications and one for inset and overlay applications. Use the included dual-function stop washers to set the lock for either a 90 degree or 180 degree cam turn. The cylinder lock has a five disc tumbler and is available in a nickel,…

    11 Review(s)
    $17.99
  13. Long Shank Carbide Forstner Bits-Metric Sizes

    Long Shank Carbide Forstner Bits-Metric Sizes

    …shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long. Technical Details:* Bits feature carbide tips for enhanced durability* Designed with spiraled flutes to allow for fast chip removal* Long shanks are 3-7/8" long* All bits have a 3/8" diameter…

    1 Review(s)
    From: $36.99
  14. Top Long Pen Hardware Kit - Chrome

    Top Long Pen Hardware Kit - Chrome

    With its distinctively long top barrel, the Top Long Pen Kit provides plenty of space to exhibit figured grain or creative barrel shapes. It also looks great in the hand, and the softly contoured ferrule provides a nice stop for your fingers. An included rubber bottom barrel can be used in place of…

    $4.99
  15. Top Long Pen Hardware Kit - Gold-Plated

    Top Long Pen Hardware Kit - Gold-Plated

    With its distinctively long top barrel, the Top Long Pen Kit provides plenty of space to exhibit figured grain or creative barrel shapes. It also looks great in the hand, and the softly contoured ferrule provides a nice stop for your fingers. An included rubber bottom barrel can be used in place of…

    $5.99
  16. Jet® 6'' Long Bed Jointer w/Helical Head

    Jet® 6'' Long Bed Jointer w/Helical Head

    …woodworker knows that square and flat stock is the key to producing fine work, so it's time to skip the hand tools and graduate to the JJ-6HHDX 6" long bed jointer. This beast boasts a helical insert cutterhead with staggered carbide inserts yet runs quietly and smoothly. Its exclusive front-mounted…

    2 Review(s)
    $1,274.99
  17. Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades. The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the…

    $56.00
  18. Long Shank Carbide Forstner Bits - Standard Sizes

    Long Shank Carbide Forstner Bits - Standard Sizes

    …shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long. Technical Details:* Bits feature carbide tips for enhanced durability* Designed with spiraled flutes to allow for fast chip removal* Long shanks are 3-7/8" long* All bits have a 3/8" diameter…

    2 Review(s)
    From: $21.99
  19. 1-3/4" Long Cylinder Lock-Choose finish and keying method

    1-3/4" Long Cylinder Lock-Choose finish and keying method

    …and one for flush or overlay applications. The provided stop washers can be used to set the lock for a 90 or 180 degree cam turn. Technical Details* Available in nickel, antique brass, or brass finish* Includes two cams and two stop washers* Two keys and mounting hardware included* Use with…

    10 Review(s)
    $17.99
  20. Sure Stop™ Lazy Susan Bearing

    Sure Stop™ Lazy Susan Bearing

    …shelves. Features simple, surface-mount installation, and rugged, cast aluminum ball-bearing construction for a long, useful life. Supports up to 400 pounds. Technical Details:* Sure Stop™ Lazy Susan Bearing measures approximately 11" in diameter x 11/16" thick.* Inside diameter is…

    $19.99
  21. Fein MultiMaster HSS Saw Blade, Wood, with Depth Stop, 32607065020

    Fein MultiMaster HSS Saw Blade, Wood, with Depth Stop, 32607065020

    The Fein HSS Saw Blade is ideal for making precise long cuts as well as for installing parquet, laminate and wall panels. The included depth stop helps you accurately gauge depth when sawing. The HSS Saw Blade is for use the Fein MultiMaster Tool. Technical Details:* 4" Diameter* Cuts wood, parquet,…

    $88.99
  22. Liberty Wall-Mount Doorstop - Chrome

    Liberty Wall-Mount Doorstop - Chrome

    …metal construction for long life* Cushioned rubber bumper stops doors and door knobs short of hitting your wall* Includes all mounting hardware for easy installation* Easy installation, just attach it to your baseboard* 3" long when assembled (built-in mounting screw measures 5/8" long)* Sold singly

    3 Review(s)
    $2.99 $0.49

    SAVE 84%

  23. Liberty  Hinge-Pin Doorstop

    Liberty Hinge-Pin Doorstop

    …cushioned bumper that stops your door knob short of the wall Technical Details:* Protects your wall from door knob damage while keeping the doorstop hidden from view* Durable die-cast zinc metal construction for long life* Adjustable cushioned rubber bumper stops doors and door knobs short…

    $1.99
  24. Liberty Hinge-Pin Doorstop

    Liberty Hinge-Pin Doorstop

    …cushioned bumper that stops your door knob short of the wall. Technical Details:* Protects your wall from door knob damage while keeping the doorstop hidden from view* Durable die-cast zinc metal or solid brass construction for long life* Adjustable cushioned rubber bumper stops doors and door knobs…

    $1.99 $0.79

    SAVE 60%

  • Items 1 - 24 of 100
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X