Low Friction

  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
  1. UHMW Plastic Jig Stock - 3/4'' Thick

    UHMW Plastic Jig Stock - 3/4'' Thick

    …UHMW has a low coefficient of friction and is self-lubricating, making it glide over your work surface with little resistance. Plus, this rugged polymer will last for years, as it is highly resistant to abrasions, chemical-resistant, and maintains its high-impact strength even at low temperatures.…

    8 Review(s)
    $30.49
  2. UHMW Plastic Jig Stock-3/8 Inch Thick

    UHMW Plastic Jig Stock-3/8 Inch Thick

    …UHMW has a low coefficient of friction and is self-lubricating, making it glide over your work surface with little resistance. Plus, this rugged polymer will last for years, as it is highly resistant to abrasions, chemical-resistant, and maintains its high-impact strength even at low temperatures.…

    8 Review(s)
    From: $26.29
  3. Festool Tool Glide Strip for Festool Guide Rails

    Festool Tool Glide Strip for Festool Guide Rails

    …consistently over the guide rail. The Glide Strip provides a slightly elevated, ultra low-friction surface for the saw to ride on, eliminating friction from contact with the guide rail, as well as the slowing effects of dust, for smoother, more consistent sawing action. Includes one 32.8ft (10 m)…

    $35.00
  4. Tack-In Drawer Glides

    Tack-In Drawer Glides

    Not all drawers require traditional slides to operate smoothly. In fact, for many smaller, lightweight drawers these simple tack-in glides may be all you need. They install in seconds, creating a smooth low-friction surface that reduces wear.* Hard plastic pads measure 11/16" x 1/2".* 10 per pack.

    6 Review(s)
    $2.69
  5. Rockler Pro Router Table Fence

    Rockler Pro Router Table Fence

    …Fence is the perfect foundation for accuracy in virtually any router table operation. The two melamine-coated MDF fence faces are adjustable for low- and zero-clearance routing, while the front- and rear-facing universal T-tracks accept featherboards, stops, hold-downs, and more. The fence also…

    $139.99
  6. SawStop Zero Clearance Lock Down Insert Standard Blade

    SawStop Zero Clearance Lock Down Insert Standard Blade

    The SawStop Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 10" standard blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit…

    $39.00
  7. Non-Stick Pen Bushings for CA Finish

    Non-Stick Pen Bushings for CA Finish

    …plasticbushings and apply your CA finish.* Self-lubricating UHMW has a low coefficient of friction, so it sheds glue easily.* Very stable - 10x heavier than regular high-density polyethylene.* High abrasion resistance and high impact strength even at low temperatures.* Resistant to chemicals.

    1 Review(s)
    $6.99
  8. Light Brown Phenolic Faced Plywood Sheets

    Light Brown Phenolic Faced Plywood Sheets

    This 14-ply solid 100% Birch plywood features hard and smooth Birch face veneers with phenolic resin thermally fused into both panel sides. The net effect is an ultra-stable, low-friction and waterproof surface with practical uses all over the shop. The virtually voidless core eliminates the need…

    5 Review(s)
    $24.99
  9. Incra® Miter V120 Gauge

    Incra® Miter V120 Gauge

    Enjoy absolute accuracy and tight-fitting, low-friction operation with this premium miter gauge. Laser-cut AngleLOCK stops in 1° increments from +/- 60° (plus special stops at +/- 22.5°) give you ultra-fine precision across the board, while a GlideLOCK miter bar adjusts for a no-slop fit…

    18 Review(s)
    $84.99
  10. Dado Jig for Low Profile Straight Edge Clamp System

    Dado Jig for Low Profile Straight Edge Clamp System

    …is a tailor-cut dado that fits like no other. Looking for the ideal Dado solution? The Dado Jig is uniquely designed to fit in the channel of our Low Profile Straight Edge Clamp System ensuring the jig does not wander from the straight edge. Perfect cuts every time! Technical Details:* The Rockler…

    1 Review(s)
    $44.99
  11. Hard Fiber Base Plate for Festool Carvex Jigsaws

    Hard Fiber Base Plate for Festool Carvex Jigsaws

    The Festool Carvex Hard Fiber Base Insert is for use on wood and similar materials. It features a smooth, low friction, phenolic surface, which, unlike a plastic base, will not pick up chips or filings that may scratch or damage your material. For use with Festool Carvex jigsaws (e.g. 45111 and…

    $23.00
  12. Jet® Dado Blade Throat Insert

    Jet® Dado Blade Throat Insert

    …Two rear tensioners also keep it from shifting around or rattling while the table saw is running. Technical Details:* High-density phenolic with low friction melamine face.* Close tolerance reduces tearout on the margins of dado cuts.* Four top-access leveling screws ensure the throat plate is level…

    $59.99
  13. Nobex Proman Miter Saw

    Nobex Proman Miter Saw

    …it a reputation of being the only miter saw exact enough for qualified picture framing. Nobex Proman's stable precision molded table along with low friction blade guides increases the accuracy of every cut. Nobex Proman features pre-set lock stops for important angles in both directions making the…

    4 Review(s)
    $129.99
  14. SawStop Zero Clearance Lock Down Insert Dado Blade

    SawStop Zero Clearance Lock Down Insert Dado Blade

    The SawStop Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 8" dado blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit in…

    $39.00
  15. Rockler Phenolic Router Table Top

    Rockler Phenolic Router Table Top

    Our brand-new Pro Phenolic Router Table Tops feature one-piece 3/4" solid phenolic construction for an ultra-flat, low-friction surface that won't warp, dent, scratch or delaminate. The 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, such as the Incra gauge, while the…

    $239.99
  16. Jet® Rip Fence w/Resaw for 14'' Bandsaw

    Jet® Rip Fence w/Resaw for 14'' Bandsaw

    Rip Fence with resaw for 14" Jet Bandsaws. Positive locking assembly slides along rail with low-friction plastic contact points for smooth, easy adjustments. Miter gauge pivots 30° left or right to facilitate angled cuts. Includes 6" x 1" diameter resaw attachment for added versatility.…

    $161.99
  17. Bench Dog® Panel-Loc™ Panel Cutting Guide

    Bench Dog® Panel-Loc™ Panel Cutting Guide

    The ultimate panel-cutting accessory! Developed by acclaimed woodworker Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down that provides safer and better cuts when routing raised panels. Orange push blocks not included. Firmly holds panel down and eliminates unwanted lifting; it…

    $52.99
  18. 45 Degree Miter Sled

    45 Degree Miter Sled

    Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in…

    85 Review(s)
    $25.99
  19. Rockler 24'' x 32'' Blank Shop Stand Table Top

    Rockler 24'' x 32'' Blank Shop Stand Table Top

    This top is made of solid MDF for stability and flatness, and coated with melamine so it sheds glue easily. At 24" x 32", it works well as a work station for benchtop power tools, as a sharpening station, or as a smaller general-purpose work table. Pair it with your own shop-built base cabinet. Made…

    $59.99
  20. Festool CMS Sliding Table

    Festool CMS Sliding Table

    …CMS Router Table. First, it increases the surface area of the table for greater control when maneuvering unwieldy material, and it decreases the friction of the stock against the table by providing a rolling support surface that moves with the workpiece. With its integrated, adjustable stop points,…

    $350.00
  21. DeWalt DC520SK HD 6-1/2" Tracksaw Kit with 59" Track-Track Saw

    DeWalt DC520SK HD 6-1/2" Tracksaw Kit with 59" Track-Track Saw

    …heavy-duty kit box. Simply lay the zero-clearance 59-inch track on your workpiece and plunge in with the 1,300 watt saw. The track's undermounted friction strips "grab" your stock - no clamping necessary - while the saw slides smoothly on four low-friction glide strips. Integrated dust control,…

    3 Review(s)
    From: $75.99
  22. DeWalt DC351SKL HD 6-1/2" 28V Li-Lion Cordless Tracksaw Kit-Saw

    DeWalt DC351SKL HD 6-1/2" 28V Li-Lion Cordless Tracksaw Kit-Saw

    …heavy-duty kit box. Simply lay the zero-clearance 59-inch track on your workpiece and plunge in with the 1,300 watt saw. The track's undermounted friction strips "grab" your stock - no clamping necessary - while the saw slides smoothly on four low-friction glide strips. Integrated dust control,…

    1 Review(s)
    From: $75.99
  23. Incra Master Lift II Designed for Rockler Tables

    Incra Master Lift II Designed for Rockler Tables

    …of the table* Quickly make super precise, 0.001" height adjustments from above* Exclusive ball bearing mechanism for super smooth action and low friction* Ultra-responsive, direct drive 16TPI lift screw mechanism* Patented thread tensioning system eliminates vertical lash in the lift mechanism*…

    5 Review(s)
    $329.99 $299.99
  24. Dimpled Base Plate for Festool Carvex Jigsaws

    Dimpled Base Plate for Festool Carvex Jigsaws

    …with Festool Carvex jigsaws (e.g. 45111 and 49192, sold separately). * Attaches to jigsaw without tools.* Rounded convex dimples have very little friction, and won't snag on uneven surfaces.* Prevents saw dust from mounding at the front of the saw when cutting without dust extraction.* Works with…

    $23.00
  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
Feedback X