Lubricant Stick

  • Grid List
  • Page:
    1. 1
  • Items 1 - 8 of 8
  • Page:
    1. 1
  1. Blade Lubricant Stick

    Blade Lubricant Stick

    The blade lubricant stick extends the life of saw blades, keeping them sharper longer. A special blend of oils and wax helps protect blades from heat damage and clogging because of the accumulation of wood, pitch and metal chips. Excellent performance on band saw, scroll saw and coping saw blades.…

    4 Review(s)
    $8.49
  2. Non-Stick Pen Bushings for CA Finish

    Non-Stick Pen Bushings for CA Finish

    Using CA glue to finish your pen turnings results in a lustrous, glossy polish,but it can also fuse your pen blank to the bushings. Not so with these non-stick polyethylene bushings in place, however. These bushings are made fromUHMW, the same super-slippery polymer used in our Plastic Jig Stock.…

    1 Review(s)
    $6.99
  3. Freud® LU89M Industrial Thick Non-Ferrous Metal Saw Blades

    Freud® LU89M Industrial Thick Non-Ferrous Metal Saw Blades

    …build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended. The Silver I.C.E.™ (Industrial Cooling Element) coating helps…

    1 Review(s)
    From: $74.97
  4. Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    …build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended. The Silver I.C.E.™ (Industrial Cooling Element) coating helps…

    From: $62.47
  5. Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    …high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended. The Silver I.C.E.™ (Industrial Cooling…

    From: $104.47
  6. The Hand Guard™ Push Block

    The Hand Guard™ Push Block

    Adjustable, replaceable heel lets you safely push different wood thicknesses on the table saw - as seen on The New Yankee Workshop! Unlike wood push sticks, this unique safety tool has self-lubricating properties to reduce kickback from blade contact! Technical Details:* Parallel guide rails on…

    9 Review(s)
    $17.99
  7. Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    …layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. Also available as a thin kerf blade. Technical…

    8 Review(s)
    $99.97
  8. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. Also available as a standard kerf blade. Technical…

    8 Review(s)
    $79.97
  • Grid List
  • Page:
    1. 1
  • Items 1 - 8 of 8
  • Page:
    1. 1
Feedback X