Melamine Router Bit

  • Items 1 - 24 of 56
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Pro Router Table Fence

    Rockler Pro Router Table Fence

    …Universal T-tracks accept 1/4" and 5/16" t-bolts as well as 1/4" hex bolts-perfect for hold-downs, stops, and featherboards.* Large opening in fence for big router bits.* Melamine fence faces for low-friction routing.* Includes a heavy-duty bit guard and a 2-1/2" diameter dust collection port.

    $139.99
  2. Rockler Bevel Router Bit - 1/4" Shank

    Rockler Bevel Router Bit - 1/4" Shank

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

    $19.99
  3. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $13.99
  4. Freud® Down-Spiral Router Bits - 1/4" Shank

    Freud® Down-Spiral Router Bits - 1/4" Shank

    …and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $19.97
  5. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $14.49
  6. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  7. Freud® 41-502 Radius Laminate Trim Router Bit - 1/2" Dia x 3/8" H x 1/4" Shank

    Freud® 41-502 Radius Laminate Trim Router Bit - 1/2" Dia x 3/8" H x 1/4" Shank

    …materials.* Use on hand-held routers, table-mounted portable routers, and laminate trimmers.* Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD™ Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and…

    $29.47
  8. Dewalt D26670 Heavy-Duty Laminate Trimmer

    Dewalt D26670 Heavy-Duty Laminate Trimmer

    …30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability in a drop* XL depth adjustment knob delivers quick adjustment or removal of the…

    $98.99
  9. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  10. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  11. Rockler High Pressure Laminate Router Table, Fence & Plate

    Rockler High Pressure Laminate Router Table, Fence & Plate

    …1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit opening) and drill…

    6 Review(s)
    $249.99
  12. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …Aluminum Router Plates Pre-Drilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose one of two non-drilled blank plates: the Standard Opening (3-1/4'' bit opening), or the Large Opening (3-11/16'' bit opening),…

    3 Review(s)
    $349.99
  13. Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    …white melamine MDF faces, front and top accessory T-tracks and an integrated bit guard and dust port. The Router Lift FX accepts the following routers: Porter-Cable 690/890 series, Bosch 1617-16-18, DeWalt 610, 616, 618.* Includes our acclaimed Rockler Router Lift FX for above-table bit height…

    $399.99
  14. Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    …two adjustable white melamine MDF faces, front and top accessory T-tracks and an integrated bit guard and dust port. * Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit changes.* The Router Lift FX accepts the following routers: Porter-Cable 690/890 series,…

    0 Review(s)
    $499.99
  15. Dewalt D26670K Laminate Trimmer Kit

    Dewalt D26670K Laminate Trimmer Kit

    …30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability in a drop* XL depth adjustment knob delivers quick adjustment or removal of the…

    $206.99
  16. Rockler Bevel Router Bit -  H Shank

    Rockler Bevel Router Bit - H Shank

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

    $19.99
  17. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two…

    From: $17.99
  18. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two…

    From: $15.99
  19. Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    …white melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit guard. 10-point plate leveling/locking system. 24" x 32" table. 8-1/4" x 11-3/4" x 1/4" aluminum plate. * Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit

    1 Review(s)
    $649.99
  20. Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    …white melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit guard. The Router Lift FX accepts the following routers: Porter-Cable 690/890 series, Bosch 1617-16-18, DeWalt 610, 616, 618. * Includes our acclaimed Rockler Router Lift FX for above-table bit

    $549.99
  21. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …a sacrificial face* Easy-grip knobs lock platform into miter slot* Platform measures 10-3/4" x 12-3/8" x 1/2"* Includes all necessary mounting hardware* The jig requires a straight router bit to match the size of the indexing key.* Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

    60 Review(s)
    $79.99 $59.99

    SAVE 25%

  22. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    …edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  23. Rockler Router Table Fence

    Rockler Router Table Fence

    …fence. Technical Details:* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Extruded aluminum backer provides a stiff, straight backbone.* Large opening for big router bits.* Aluminum fence backer features top-mounted universal T-track that accepts 5/16"…

    $84.99
  24. Porter Cable 1-3/4 HP D-Handle Router, Model #691

    Porter Cable 1-3/4 HP D-Handle Router, Model #691

    …like melamine and PVC trim. Macro-adjust the tool with the cam-lock lever for simple edge-forming. Use the micro depth adjustments for bit depth changes accurate to 1/128 of an inch. It accepts collets for 1/4 and 1/2 inch shank bits and features an auto-release collet system minimizing frozen bits.

    2 Review(s)
    $183.99
  • Items 1 - 24 of 56
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X