Metal Lathe

  • Items 1 - 24 of 67
  • Page:
    1. 1
    2. 2
    3. 3
  1. Nova 1624-44 16'' x 24'' Lathe

    Nova 1624-44 16'' x 24'' Lathe

    …Nova 1624 Lathe boasts the most power, versatility and features of any comparable mid-range lathe. Its swiveling headstock rotates a full 360°, and locks at any position for outboard turning of large items. The powerful 1.5 HP motor delivers 50% more power than comparable lathes, and features…

    $1,399.99
  2. Powermatic® Wood Lathe 2HP

    Powermatic® Wood Lathe 2HP

    The Powermatic® 3520B is the third evolution of the time-honored lathe with many new and improved features. The 3520B retained all the features of the prior models such as the sliding headstock, electronic variable speed with low- and high-speed ranges and the spindle lock. The enhanced features…

    $3,999.99
  3. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    Our Mini Carbide Turning Tools feature a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer…

    7 Review(s)
    $189.99 $119.99

    SAVE 37%

  4. Pen Turning Mandrel, #1 Morse Taper

    Pen Turning Mandrel, #1 Morse Taper

    …tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and knurled…

    $15.99 $9.99

    SAVE 38%

  5. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …provide more sliding surface without having to readjust. 5/8" diameter mounting post fits most mini and midi lathes. Technical Details:* 5/8" diameter mounting post fits most mini and midi lathes.* 5/16" round stainless steel tool rest.* Cast steel body with black epoxy finish.* Integrated mounting…

    5 Review(s)
    From: $19.99
  6. Nova Lathe Handwheel

    Nova Lathe Handwheel

    …comes standard with all Nova DVR Lathes, and can be used on all Nova lathes except for the Nova Comet II Midi Lathe. * Compatible with all Nova lathes except for the Comet II Midi Lathe.* Used on outboard end of lathe headstock to position work by hand (lathe must be switched off).* Machined from…

    $31.49
  7. Lathe Tool Holder

    Lathe Tool Holder

    Keep your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.* 12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection…

    14 Review(s)
    $27.99 $19.99

    SAVE 29%

  8. Wood Lathe Tailstock Center, MT2

    Wood Lathe Tailstock Center, MT2

    Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a…

    $24.99
  9. Wood Lathe Tailstock Live Center, MT1

    Wood Lathe Tailstock Live Center, MT1

    Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a…

    $24.99
  10. Nova Comet II Midi Lathe with FREE Reversible G3 Chuck

    Nova Comet II Midi Lathe with FREE Reversible G3 Chuck

    …II Midi Lathe packs the capacity and rugged stability of much larger lathes into a portable, space-saving design. And with the included G3 Comet II reversible chuck, you can take full advantage of the lathe's reversing feature for better versatility and a superior finish. The lathe has electronic…

    $689.98 $529.99

    SAVE 23%

  11. Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    …Hybrid Lathe Stand provides a solid, yet lightweight foundation for your Nova DVR XP Lathe (45311, sold separately). Made from a mix of solid steel and cast iron, it provides rigid strength, but is light enough for easier portability. The stand also comes standard with the Nova 1624-44 Lathe (48465,…

    $304.99
  12. Stand for Jet® JWL-1015 and JWL-1015VS Lathes

    Stand for Jet® JWL-1015 and JWL-1015VS Lathes

    Convert your Jet® JWL-1015 lathe (e.g. 47681, sold separately) from a benchtop lathe to a free-standing lathe with the JWL-1015 Stand. The stand features extra-wide feet for excellent stability, and includes a convenient storage basket that keeps your turning tools and accessories close at hand.…

    $279.99
  13. Stand Extension for Jet® JWL-1015 and JWL-1015VS Lathes

    Stand Extension for Jet® JWL-1015 and JWL-1015VS Lathes

    …JWL-1015 lathe (e.g. 47681 with 46484, sold separately). The Stand Extension consists of a center leg and horizontal stretcher. Sturdy steel construction. * Once the Stand Extension is combined with the Jet® JWL-1015 Stand (49418, sold separately), three sturdy columns support your lathe from…

    $129.99
  14. Nova G3 Comet II Reversible Chuck

    Nova G3 Comet II Reversible Chuck

    …reverse mode without the risk of unthreading. It is designed for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing lathes, the set screw must be removed. Like the similar Nova G3, this chuck is a four-jaw,…

    $159.99
  15. Nova G3 Insert Chuck

    Nova G3 Insert Chuck

    …This is an insert chuck, and requires you to purchase a dedicated Insert/Adapter for mounting on your lathe. Includes a set of 2" (50mm) jaws. * Recommended for power workholding on lathes with up to a 400mm/16" diameter swing.* Up to 350mm/14" diameter bowls using 50mm/2" Jaws (supplied…

    $149.99
  16. Nova 2MT Spur Center

    Nova 2MT Spur Center

    …Nova lathes, and it also works well as a replacement or as an upgrade for another lathe. Its rugged four-prong profile bites into your wood blank to provide a secure grip for spindle turnings and other demanding workpieces. Precisely machined from medium-tensile carbon steel. Fits all Nova lathes,

    $21.99
  17. Nova Titan 1-1/4" 8-TPI Direct Thread Chuck

    Nova Titan 1-1/4" 8-TPI Direct Thread Chuck

    …for large lathes and big projects.* Single-handed operation means more time spent turning and less time spent preparing.* Ball-nose hex wrench with large, easy grip handle for fast, positive location.* Body made from precision machined 1045 High Tensile Steel with a polished self metal finish to…

    $269.99
  18. Nova Simple Live Center

    Nova Simple Live Center

    lathe to find the morse taper size. * 2MT Center, suitable for all lathes with a #2 morse taper tailstock.* Heavy-duty sealed ball bearings for long life.* Steel point for a solid bite into the turning blank.* Precisely machined medium tensile carbon steel.* Standard equipment on all Nova lathes.

    $21.99
  19. Nova SuperNova 2 Insert Chuck

    Nova SuperNova 2 Insert Chuck

    …This is an insert chuck, and requires you to purchase a dedicated Insert/Adapter for mounting on your lathe. Includes a set of 2" (50mm) jaws. * Recommended for power workholding on lathes from 350mm (14") to 508mm (20") diameter swing.* Holds up to 310mm/12" bowl (using standard…

    $199.99
  20. Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    The Nova Precision Midi Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the SuperNova 2…

    $119.99
  21. Nova Universal Chuck Spanner

    Nova Universal Chuck Spanner

    …an economic way to have a dedicated solution in your chuck toolbox. The Nova Spanner has a thin section that fits easily between the chuck and lathe where standard spanners can be too thick to insert properly. The handle has a good length to provide an adequate grip and purchase. The Nova Universal…

    $18.99
  22. Nova Tailstock Chuck Adaptor

    Nova Tailstock Chuck Adaptor

    …Chuck Adapter can be used to support work with a chuck e.g. in conjunction with vacuum chucking.* #2 morse taper fits all Nova chucks and Nova lathe tailstocks.* Made from medium tensile carbon K1045 steel to provide maximum structural strength.* 1-1/4" 8-TPI RH thread (USA, Canada, Australasia…

    $37.99
  23. 16'' Longworth Style Chuck

    16'' Longworth Style Chuck

    …stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring the…

    1 Review(s)
    $199.99
  24. 10'' Longworth Style Chuck

    10'' Longworth Style Chuck

    …stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring the…

    1 Review(s)
    $139.99
  • Items 1 - 24 of 67
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X