Metal Protractor

  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
  1. Incra Miter Gauge 1000

    Incra Miter Gauge 1000

    Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18" track fence and sliding stop positioner. Whether it's your basic 90° cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable…

    $109.99
  2. Wixey 3'' Digital Protractor

    Wixey 3'' Digital Protractor

    …and bevel angles. And with magnets on every blade edge, it's especially easy to use on metal. It also features a convenient tightening mechanism for holding measurements. Protractor shuts off automatically for an extended battery life.* Uses a 3.0V CR2032 battery* Protractor range: +/- 180 degrees

    5 Review(s)
    $52.99
  3. Bevel Setting Protractor

    Bevel Setting Protractor

    This handy tool is like a bevel gauge with the addition of a protractor scale - essential for when you need to hit a specific angle. Use it to transfer angles from a pattern to your saw or jointer, or as a marking gauge. It's graduated from 0° to 180° in both directions so you can quickly…

    1 Review(s)
    $18.99
  4. iGaging 8" Digital Angle Protractor (35-408)

    iGaging 8" Digital Angle Protractor (35-408)

    …degree! Mark miters, check 90°corners and more. Two overlapping steel blades feature inch and millimeter markings to1/16" and 0.1mm. Digital protractor device measures the angle between the blades asthey are slid apart. Measures entire 360° range and is accurate to +/-0.2°. Holding…

    6 Review(s)
    $41.99
  5. 4'' Steel Engineer Square

    4'' Steel Engineer Square

    This 4" steel engineer square is perfect for setting up machinery, marking stock for joints or checking stock for squareness.

    4 Review(s)
    $15.99
  6. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  7. Oshlun 12'' Combination Square, 3 Piece Set

    Oshlun 12'' Combination Square, 3 Piece Set

    …and etched stainless steel blade with 1/8", 1/16", 1/32" and 1/64" scales and includes a square head with 45° shoulder, center head and a protractor head with a double 180°protractor scale (all with reversible lock bolts). It also features a miter square, depth gauge, height gauge, scratch…

    4 Review(s)
    $69.99
  8. 45/90 Degree Stainless Steel Miter Gauge

    45/90 Degree Stainless Steel Miter Gauge

    Used for precise 45° and 90° reference, this solid steel gauge has applications allover the shop. Lay out miters for picture frames or trim; set blade angles; check corners for square — the possibilities are endless. A sturdy base allows it to stand upright. Interior windows add…

    4 Review(s)
    $27.99
  9. INCRA Precision Marking Rules

    INCRA Precision Marking Rules

    The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.

    3 Review(s)
    From: $13.99
  10. 10'' Sliding T-Bevel Square

    10'' Sliding T-Bevel Square

    Metal blade pivots and can be locked at any angle.

    $20.99
  11. Digital Sliding T-Bevel Gauge

    Digital Sliding T-Bevel Gauge

    Take the guesswork out of angle measurement and duplication with this 2-in-1 Digital Sliding T-Bevel and Protractor! Features a large digital angle readout that gives you precise 360° measurements with an accuracy to 0.3° and .05° resolution and holds them while you transfer to stock.…

    5 Review(s)
    $36.99
  12. 3-Piece Engineer Square Set

    3-Piece Engineer Square Set

    This handy set is great for setting up and checking machines and projects for extreme accuracy to 0.00063".* Includes 2", 4" and 6" precision steel squares.* Hardened spring steel blades are permanently fixed to the stock with tapered self-locking rivets for complete rigidity.* Working edges of the…

    21 Review(s)
    $49.99
  13. 4'' Mini Try Square

    4'' Mini Try Square

    The must-have tool for laying out precise 90° angles, checking internal angles, marking stock or using as a guide for mortising.* Rosewood handle with 4-3/8" hardened steel blade.* Triple rivets ensure constant accuracy.

    1 Review(s)
    $21.49
  14. 6'' Tri-Miter Square by Crown Hand Tools

    6'' Tri-Miter Square by Crown Hand Tools

    Anything from Crown Hand Tools Ltd. is a treat for you and your toolbox! Manufactured to British Standard BS3322, this beautiful 6" Tri-Miter Square is no exception. Features a hardened, tempered and blued steel blade with rosewood stock. Fitted with Brass, this tool is accurate, attractive and a…

    7 Review(s)
    $28.49
  15. Starrett 6'' Rule

    Starrett 6'' Rule

    We measured this rule with a precision caliper - the display read 6.000" on the dot. Now that's Starrett accuracy! Features 1/32" graduations on the short end of the rule, making it perfect for setting bit and blade heights. Compact size means it will always be handy in an apron pocket. The first…

    3 Review(s)
    $29.49
  16. 12'' Centerpoint Rule

    12'' Centerpoint Rule

    Targets the exact center every time. Find dead-center on your project by simply matching numbers. Just measure the end points (say, 7 3/8" ), then find the corresponding number (7 3/8" ) on the lower scale. Made of durable tempered stainless steel with etched, black-filled numbers in standard…

    6 Review(s)
    $13.99
  17. iGaging Hooked Rulers

    iGaging Hooked Rulers

    Measure accurately down to the nearest 1/64" with a Hook Rule! High quality rules are made from hardened and tempered stainless steel and have an adjustable hook that may be used on either side. Use it to measure dimensions from the edge of any board. Precision etched for long life and readability,…

    1 Review(s)
    From: $9.99
  18. Oshlun 6'' Fractional Dial Caliper

    Oshlun 6'' Fractional Dial Caliper

    Ideal for woodworkers who prefer precision measurements in fractions! Eliminates the error potential of converting decimals to fractions. Graduated in 1/64" increments on the outer ring of the dial, while decimal measurements in 100th increments are on the inner scale. Technical Details:* For…

    7 Review(s)
    $49.99
  19. 6" Engineer Square

    6" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $22.99
  20. 4" Engineer Square

    4" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $12.99
  21. iGaging 9'' Ebony Sliding T-Bevel

    iGaging 9'' Ebony Sliding T-Bevel

    The sliding t-bevel is the tool of choice for transferring angles and laying out dovetails and angled joinery. This model is offered with a beautiful ebony handle and solid brass wear strips for durability and a stable reference surface. 9" blade pivots and slides, and is locked in place with a…

    $37.99 $16.99

    SAVE 55%

  22. iGaging 6'' Fractional Dial Caliper

    iGaging 6'' Fractional Dial Caliper

    If a reading of 0.9375" leaves you wondering where you left your calculator, then this is the dial caliper for you. Instead of requiring you to memorize cumbersome decimals, the clear, easy-to-read dial gives you neat fractions: 15/16". Now that sounds more like it. Features four-way measurement:…

    1 Review(s)
    $54.99
  23. iGaging 12'' Center Rule & Angle Gauge

    iGaging 12'' Center Rule & Angle Gauge

    Use this multifunction ruler to dial in the angle on your bevel gauge, find centers for drilling drawer knobs, set the height on your table saw or router table, or simply as a standard ruler. One face features a precision angle gaugefrom 0-50°, while the other has a 6" x 6" center rule along one…

    $19.99
  24. iGaging Precision Straight Edges with Rulers

    iGaging Precision Straight Edges with Rulers

    When it comes to jointer setups, layout, drafting, lapping the sole of a handplane, or checking lumber for warp, a precision straight edge is an essential tool for the shop. These premium straight edges are meticulously ground and lapped for straightness and parallelism, and they feature a beveled…

    2 Review(s)
    From: $26.99
  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
Feedback X