Micro

  • Items 1 - 24 of 217
  • Page:
    1. 1
    2. 2
    3. 3
  1. INCRA Precision Marking Rules

    INCRA Precision Marking Rules

    The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.

    3 Review(s)
    From: $13.99
  2. Table Saw Magnet Micro Adjuster™

    Table Saw Magnet Micro Adjuster™

    Make fast, accurate adjustments to your T-square style table saw fence.* Allows for precise dadoes and a perfect fit every time.* Three powerful rare earth magnets hold adjuster securely on front rail.* Mounts and dismounts in seconds without tools.* With soft rubber handle for comfort.* Soft…

    35 Review(s)
    $21.99
  3. MagSwitch Resaw Guide Attachment

    MagSwitch Resaw Guide Attachment

    …or disc sander; and for infeed/outfeed support. Technical Details:* Product Dimensions: 4" x 8-1/2"* Low profile design for use on your smallest tables* Includes micro adjustment for fine tuning to 90 degrees* Features roller bearing support for firm yet smooth gliding of wood through a blade

    $25.49
  4. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    …innovative features of the GR-100 but comes with two additional accessories that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is built to meet the needs of the professional woodworker or extreme hobbyist. With enhanced…

    7 Review(s)
    $79.99
  5. GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    Every once in a blue moon you miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg,…

    $14.99
  6. Micro Adjuster for Router Table Fence

    Micro Adjuster for Router Table Fence

    Micro adjust your router fence for superior routing accuracy. Onboard clamp attaches to the router table and houses the finely threaded micro adjuster screw. Included rare earth magnet attaches to the reversible screw and attracts the metal fence tab. This allows push and pull adjustment from either…

    7 Review(s)
    $22.99
  7. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    With Micro Jig's precision tapering jig, you can cut clean, crisp tapers with precise repeatability in increments as fine as 1/8 of a degree. Cut 2-, 4-, even 8-sided tapered legs as well as tapers for table tops and cabinet parts with a single jig! The Microdial adjustment system features index…

    $139.99
  8. Robert Sorby Micro Spindlemaster

    Robert Sorby Micro Spindlemaster

    …small turning projects, the Sorby Micro Spindlemaster is the answer. It has no corners to catch and dig in, and it planes, beads, coves and trims end grain with a polished bevel that leaves a superb finish from the tool, especially on softer woods. The 10" long Micro Spindlemaster is ideal for small…

    12 Review(s)
    $39.99
  9. Robert Sorby Micro Texturing Cutter

    Robert Sorby Micro Texturing Cutter

    This attachment for the Micro Spiraling Tool is a perfect way to add beautiful surface decoration to miniature projects.

    $15.99
  10. Robert Sorby Micro Turning Set

    Robert Sorby Micro Turning Set

    This Robert Sorby Micro Turning Set is scaled down in size, but not in quality! Robert Sorby is the world's premier manufacturer of specialist wood working tools with a heritage dating back over two hundred years. Designed for smaller, more delicate work, this set includes a 1/8" gouge, 1/4" gouge,…

    $179.99
  11. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly…

    4 Review(s)
    $34.99
  12. Bosch Colt PR20EVSPK Palm Router/Plunge Base Combo Kit

    Bosch Colt PR20EVSPK Palm Router/Plunge Base Combo Kit

    …monitors and maintains speed under load for consistent performance.* Angled cord exit helps keep cord out of the way.* Rugged aluminum fixed base with micro and macro depth adjustment.* Tool-free conversion - Quick clamp system allows motor to be easily adjusted or moved from base to base.* Fast and…

    $189.99
  13. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    Improve Table Saw Safety! The affordable Micro Jig MJ Splitter™ system is simple to use, exact, and extremely effective. Produces virtually burn-free cuts! Technical Details:* Low-profile splitter also serves as a mini featherboard for the keeper piece behind the saw blade.* Designed to be…

    14 Review(s)
    From: $30.99
  14. Micro Drill Chuck

    Micro Drill Chuck

    Designed for the most exact, fine-detailed drilling jobs, this specially-machined 4-jaw chuck fits in standard chucks to securely hold the smallest drill bits - ranging from #61 (.039") down to #97 (.0059"). It is ideal for close-up drilling on delicate work pieces like miniatures, model clocks,…

    3 Review(s)
    $11.49
  15. INCRA Precision Protractor

    INCRA Precision Protractor

    We've reinvented the protractor by putting micro-fine guide holes at every 45o, 30o, 22.5o, 5o, 1o and 0.5o interval to plot any angle with ease and absolute accuracy.

    1 Review(s)
    $32.99
  16. Micro-Mesh™ Cushioned Abrasives

    Micro-Mesh™ Cushioned Abrasives

    Put the smoothest possible finish on your projects with ultra fine grit cushioned abrasives. With a flexible cloth back and resilient inner layer, micron-graded silicone carbide crystals recede to an even planing level as they establish each successively finer scratch pattern. Available in 5" disk…

    From: $26.29
  17. Micro-Mesh Cushioned Abrasives

    Micro-Mesh Cushioned Abrasives

    Washable and reusable abrasives are great for sanding small projects on the lathe! Unique cushioning design results in extended abrasive life, the best surface finish possible, and fewer steps. Conforms to the shape while providing even pressure against the surface. Backed with a flexible cloth,…

    7 Review(s)
    From: $18.99
  18. Micro Jig GRR-Ripper® 1/8'' Side Leg GRP-11G

    Micro Jig GRR-Ripper® 1/8'' Side Leg GRP-11G

    …on your project or when building miniatures. Precision, safety, and confidence with the GRR-Ripper. 1/8" side leg attachment easily installs to the Micro Jig GRR-Ripper® Basic 3D Push Block System (GR-100) (sold separately) with included hardware, creating a 3/8" tunnel to enable table saw rips…

    1 Review(s)
    $15.49
  19. Micro-Adjuster for Kreg Band Saw Fence

    Micro-Adjuster for Kreg Band Saw Fence

    Micro-adjuster lets you dial in precise adjustments on the Kreg Precision Band Saw Fence (26186, sold separately) - down to .005" - with the simple turn of a thumb wheel.

    3 Review(s)
    $14.99
  20. Precision Adjustment Block for Best Fence System

    Precision Adjustment Block for Best Fence System

    Precision adjustment blocks are at the root of the Best Fence System. These blocks allow for two adjustments - front-to-back and height - so that you can line up the Best Fence perfectly with your miter saw table and fence. One knob loosens the block for large movements front-to-back; two additional…

    $74.99
  21. Precision Glue Applicators

    Precision Glue Applicators

    …application for glues, inks, lubricants, sealants, coatings and all types of liquids and pastes. The Dispense Pack includes:* (2) 12cc syringes* (2) 14-gauge plastic micro tips* (2) 16-gauge plastic micro tips* (2) 18-gauge stainless steel tips* (2) 20-gauge stainless steel tips* (2) Storage caps

    11 Review(s)
    $8.19
  22. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro jig Handle Bridge (sold separately) provides four contact points to apply more downward pressure across the entire width of the Micro Jig GRR-Ripper's body for better control. Also includes replaceable push foot.* Micro Jig GRR-Ripper instructional DVD covers over 30 applications of the Micro

    25 Review(s)
    $59.99
  23. Micro Jig ZeroPlay® Stop ZP9-S1

    Micro Jig ZeroPlay® Stop ZP9-S1

    More than just a miter stop! Small and versatile, this stop can also lock a jig in place or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits standard 3/4" x 3/8" T-Style miter slots.

    $7.39
  24. Kreg™ Precision Miter Gauge System

    Kreg™ Precision Miter Gauge System

    Positive stops at 0°, 10°, 22-1/2°, 30° and 45° - and micro-adjustability to 1/100° - give you speed, repeatability and the same accuracy that machine shops strive for!* Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say…

    13 Review(s)
    $139.00
  • Items 1 - 24 of 217
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X