Microadjuster

  • Items 1 - 24 of 61
  • Page:
    1. 1
    2. 2
    3. 3
  1. Laguna Drift Master Fence System

    Laguna Drift Master Fence System

    …most bandsaws* Quick-set wheel allows for fast and easy tool-free drift adjustment* Accurate and repeatable veneer cuts are made easy with the micro-adjustment handle* Make repeated cuts using the outside edge of the blade* Hi / Low fence system is easily changedwithin seconds and is extra long for…

    2 Review(s)
    $395.00
  2. Porter-Cable Micro-adjust Edge Guides

    Porter-Cable Micro-adjust Edge Guides

    Easy to use, the Porter-Cable 42690 Edge Guide provides an accurate edge guide to help you make straight, precise cuts. Built with an anodized, extruded aluminum body for extra strength. The dual sliding body also has lockable mounts to allow for easy operation. Includes all mounting hardware.…

    3 Review(s)
    $49.99
  3. Kreg Precision Router Table Fence

    Kreg Precision Router Table Fence

    …Lens Cursor lets you forget about using a tape measure and pencil, and start getting real accuracy out of your router table. The optional Micro-Adjuster allows you to dial down your precision even further.* Heavy-Duty Aluminum Design: Fully enclosed 36-1/2" heavy-duty aluminum extrusion…

    $199.00
  4. Micro-Adjuster for Kreg Band Saw Fence

    Micro-Adjuster for Kreg Band Saw Fence

    Micro-adjuster lets you dial in precise adjustments on the Kreg Precision Band Saw Fence (26186, sold separately) - down to .005" - with the simple turn of a thumb wheel.

    3 Review(s)
    $14.99
  5. FUSION Universal Flat Panel Micro-Adjustable Tilt Wall Mount 37-63'' Displays

    FUSION Universal Flat Panel Micro-Adjustable Tilt Wall Mount 37-63'' Displays

    Universal micro-adjustable tilt design solves many flat panel installation problems. ControlZone post-installation fine tuning are key in making installation of large displays (up to 200 lbs.) simple and painless. Centris low-profile tilt uses the center of gravity to balance the screen.…

    $279.99
  6. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …router in only seconds with the easy-to-install CRB7 Multi-Function Router Base. The CRB7 arms your router with the ability to cut fully microadjustable dadoes, mortises, circles, and indexed grooves for faux paneling and shelving systems. In addition to that, the offset design provides excellent…

    6 Review(s)
    $79.99
  7. Festool CMS-GE Router Table Set

    Festool CMS-GE Router Table Set

    …bit. Above-table bit changes and bit height adjustments are effortlessly smooth. The fence features excellent adjustability, plus a unique microadjustable jointing feature for precise stock removal. To access the bottom of the table, the entire top swings up and out for easy access. It also includes…

    $1625.00
  8. Kreg™ Precision Miter Gauge System

    Kreg™ Precision Miter Gauge System

    Positive stops at 0°, 10°, 22-1/2°, 30° and 45° - and micro-adjustability to 1/100° - give you speed, repeatability and the same accuracy that machine shops strive for!* Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say…

    13 Review(s)
    $139.00
  9. Precision Adjustment Block for Best Fence System

    Precision Adjustment Block for Best Fence System

    …knobs micro-adjust front-to-back location and height so that you can dial the fence perfectly into place. Large rubberized grips are easy to hold and comfortable to use. See the Best Fence v3 System here. Technical Details:* Macro-adjustable knob controls large front-to-back movements* Micro-adjust

    $74.99
  10. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …saw, or our 4-Piece Straight Bit Set (sold separately, 60579) using your router. Technical Details* Cuts box joints from 1/4" to 13/16" wide* Micro-adjust feature allows adjustments of less than 1/64"* Secure-lock settings keep the jig in place while in use* Plastic backing strip helps eliminate…

    16 Review(s)
    $119.99
  11. Jet® Shaper with 1/2'' & 3/4'' Spindles

    Jet® Shaper with 1/2'' & 3/4'' Spindles

    …durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4" dust port. If you feel you just don't have the space, the nominal 23" x 25" footprint of this workhorse is sure to change…

    0 Review(s)
    $2034.99
  12. Stanley Sweetheart Block Plane

    Stanley Sweetheart Block Plane

    …with lateral lock. Adjustable mouth reduces tear out. Hone the iron before use to achieve exceptionally fine shavings. Additional features:* Finely machined solid brass adjustment hardware* Plane iron is honed to an angle of 25° and is micro-adjustable to 30°* Limited lifetime warranty

    2 Review(s)
    $89.99
  13. 6'' Wide Base Filler Organizer with Blumotion Soft-Close Slides

    6'' Wide Base Filler Organizer with Blumotion Soft-Close Slides

    …organizers are 30'' high and 23'' deep, and they come fully assembled, ready to be installed in between cabinets (can be installed only with new cabinet construction). Simply add your own cabinet front to match. Micro-adjustment screw allows for precise door alignment. Limited lifetime warranty.

    $199.99
  14. Wide Base Filler Organizer with Ball-Bearing Soft-Close Slides

    Wide Base Filler Organizer with Ball-Bearing Soft-Close Slides

    …organizers are 30'' high and 23'' deep, and they come fully assembled, ready to be installed in between cabinets (can be installed only with new cabinet construction). Simply add your own cabinet front to match. Micro-adjustment screw allows for precise door alignment. Limited lifetime warranty.

    From: $139.99
  15. Powermatic® 14'' Band Saw with 2-Piece Stand

    Powermatic® 14'' Band Saw with 2-Piece Stand

    …nine-spoke cast-iron wheel makes for smooth blade travel, and a Carter™ quick-tension release lever makes blade changing easy. A micro-adjustable dual-bearing blade guide system is featured above and below the table, and the saw features a work lamp and chip blower. A Poly-V belt maximizes…

    2 Review(s)
    $1199.99
  16. Jet® 20'' 3HP Bandsaw w/Quick Tension

    Jet® 20'' 3HP Bandsaw w/Quick Tension

    …3HP motor and poly v-belt drive for efficient power transfer. A three-position tensioner allows quick blade adjustments and tracking. The micro-adjustable ball bearing guides run smoothly with less friction heat. The extra large cast trunnion system and triangular-design frame dampen vibration…

    $2904.99
  17. Jet® 1.5HP Shaper, 1/2'' & 3/4'' Spindles

    Jet® 1.5HP Shaper, 1/2'' & 3/4'' Spindles

    …durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4" dust port. If you feel you just don't have the space, the nominal 23" x 25" footprint of this workhorse is sure to change…

    $1119.99
  18. Jet® 14'' 1HP Band Saw with Closed Stand

    Jet® 14'' 1HP Band Saw with Closed Stand

    …computer-balanced wheels eliminate vibration for accurate blade tracking* Single-knob tracking adjustment simplifies the blade tracking process* Micro-adjustable lower blade guide reduces friction for longer blade life* Graphite-impregnated polymer blade guides with roller-bearing thrust guides…

    $749.99
  19. Stanley Sweetheart Bench Plane

    Stanley Sweetheart Bench Plane

    …exceptionally fine shavings. Technical Details:* Finely machined solid brass adjustment hardware* Plane iron is honed to an angle of 25° and is micro-adjustable to 30°* Cherry handle and knob* Plane is 11" overall in length* Iron is made from 1/8" steel* Base and frog cast as a single piece*…

    4 Review(s)
    $159.99
  20. Stanley Sweetheart Low Angle Block Plane

    Stanley Sweetheart Low Angle Block Plane

    …fine shavings. Technical Details::* Finely machined solid brass adjustment hardware.* Plane iron is honed to an angle of 25° and is micro-adjustable to 30°.* Iron is made from 1/8" steel for superior edge retention.* Features Norris-style adjustment with lateral lock.* Adjustable mouth…

    7 Review(s)
    $89.99
  21. Stanley Sweetheart Low Angle Jack Plane

    Stanley Sweetheart Low Angle Jack Plane

    …fine shavings. Technical Details:* Finely machined solid brass adjustment hardware * Plane iron is honed to an angle of 25° and is micro-adjustable to 30° * Limited lifetime warranty* Iron is made of extra-thick 3/16" steel* Norris-style adjustment with lateral lock for versatility*…

    4 Review(s)
    $159.99
  22. 18" Universal Track for Magswitch Workholding System

    18" Universal Track for Magswitch Workholding System

    …accepts all standard T-bolts and all 1/4" hex. The other side accepts all standard T-bolts, all 5/16" hex and Kreg® clamps.* Includes micro-adjustable brackets for fine tuning to 90 degrees.* Features core advantages of Magswitch, including fast, strong setup anywhere on a steel table or cast…

    $32.49
  23. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    …accepts all standard T-bolts and all 1/4" hex. The other side accepts all standard T-bolts, all 5/16" hex and Kreg® clamps.* Includes micro-adjustable brackets for fine tuning to 90 degrees.* Features core advantages of Magswitch, including fast, strong setup anywhere on a steel table or cast…

    $65.99
  24. Work Sharp™ WS3000 Tool Bar Attachment

    Work Sharp™ WS3000 Tool Bar Attachment

    …tool. Cast metal bracket and a steel tool bar are rigid and provide a stable platform for freehand sharpening or the use of sharpening jigs. Micro-Adjust Nut provides precise Tool Bar positioning and repeatability. Provided Set Up Fixture creates consistent and repeatable tool set ups for fast and…

    $49.99
  • Items 1 - 24 of 61
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X