Mill

  • Items 1 - 24 of 221
  • Page:
    1. 1
    2. 2
    3. 3
  1. JET® JMD-15 Mill/Drill With R-8 Taper

    JET® JMD-15 Mill/Drill With R-8 Taper

    The Jet® JMD-15 is a lighter, space-saving alternative to a dedicated milling machine. It combines a belt driven drill press with the dual coordinate abilities of the milling machine's moveable table, providing three microadjustable axes for precision results in a variety of metal machining…

    $1,699.00
  2. Nicholson Cabinetmaker Files

    Nicholson Cabinetmaker Files

    …Teeth are slightly finer than those of wood files. Radius is larger and thinner than regular half-round files.* #12369 - 10" Mill Smooth Cut Used for sharpening mill or circular saws. Also for draw-filing and finishing metals. Rectangular shape. Single cut on sides and edges. Two square edges.*…

    4 Review(s)
    From: $19.49
  3. CrushGrind Mill Mechanisms-Mill Mechanisms

    CrushGrind Mill Mechanisms-Mill Mechanisms

    Add a dash of spice to your turning with these innovative mill mechanisms! These innovative salt, pepper and spice mill mechanisms allow you to turn your own mill on the lathe! Each mill features a ceramic grinding mechanism and bottom-mounted locking grind adjustment knob. Snap-in fittings do not…

    9 Review(s)
    $19.99
  4. Freud® Beadboard Router Bit System

    Freud® Beadboard Router Bit System

    …Groove System mills perfect beadboard in a variety of thicknesses from 3/8" to 3/4", and in almost any width. Mill beadboard from any hardwood or softwood, and use it to create a beautiful effect as wainscoting, wall or ceiling paneling, cabinet and bookcase backs, and more. To mill beadboard as…

    From: $18.97
  5. Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    Meet the ultimate router table - complete with a fence, plate and router lift! At 24" x 32" x 1-1/2", the Bench Dog Cast-Iron Router Table is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square feet of ultra-flat…

    $899.99
  6. Fluted Parting Tool, 2mm

    Fluted Parting Tool, 2mm

    With a milled flute along the bottom edge, two sharp spurs at the cutting face and a tip that always cuts at a shear angle of 45°, this parting tool produces a burnished finish that hardly needs sanding at all. The tapered profile reduces the risk of binding in the cut, and when parting off, the…

    1 Review(s)
    $69.99
  7. Carter Accuright® Log Mill™

    Carter Accuright® Log Mill™

    …on the front to secure logs to the mill* Adjustable fence lets you make repetitive cuts or use with a stationary fence on your saw as a jig for same-thickness cuts* Turns raw logs into beautiful, ready-to-use lumberIncludes:* Heavy-duty steel frame* MDF log mill platform* Steel miter bar* Front…

    3 Review(s)
    $139.95
  8. Making a Peppermill - Focus on Design,  DVD

    Making a Peppermill - Focus on Design, DVD

    …for your lathe Chapters:* Parts of the Peppermill* Design Your Mill* Find Visual Interest* Prepare the Blank* Bore the Cavities* Make a Jam Chuck* Shape the Mill* Sand and Finish* Assemble the Mill* The Salt Shaker Ted's Goody Box:* Bandsaw Jig* Salt Mill* Underhand Grip* Rule of Thirds* Parallelism

    7 Review(s)
    $31.49
  9. Barrel Cleaner/Pen Mill Kit

    Barrel Cleaner/Pen Mill Kit

    Prepare your pen blanks properly! The trimmer trims the ends of the blank to the exact size of the brass tube and also leaves a flat edge on the blank for a flush meeting with bushings. Pilot shafts clear out any glue that may be left in the brass tube. Your pen assembly will be much easier!…

    2 Review(s)
    $29.99
  10. Freud® 99-480 Base Cap Router Bit - 1-3/4" Dia x 1-1/2" H x 1/2" Shank

    Freud® 99-480 Base Cap Router Bit - 1-3/4" Dia x 1-1/2" H x 1/2" Shank

    Mill traditional "mop" boards and attractive base cap moldings! This router bit is ideal for renovators and homeowners who need to match extra-high base moldings in older homes. The bits can be used to rout base cap only, or to profile the edge of wide base molding. The wood species is up to…

    1 Review(s)
    $67.47
  11. Complete Manual of Wood Bending Book

    Complete Manual of Wood Bending Book

    …stairbuilder for the past 20 years. Contents:* Introduction* A Quick Guide to Curved Wood * Part One: Design, Planning, Drawing * Part Two: Milling Parts from Solid Lumber* Part Three: Lamination-Bending* Part Four: Steam Bending* Part Five: Combining Techniques and Other Methods* Appendix…

    1 Review(s)
    $25.95
  12. Bench Dog® Cast Iron Router Table, Plate, Pro Fence & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Plate, Pro Fence & Steel Cabinet

    Meet the ultimate router table – complete with a fence, plate and a steel cabinet! At 24" x 32" x 1-1/2", the Bench Dog Cast-Iron Router Table is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than five square feet…

    $999.99
  13. Cast Iron Wheel Coffee Grinding Mechanism, with FREE Downloadable Plan!

    Cast Iron Wheel Coffee Grinding Mechanism, with FREE Downloadable Plan!

    …iron coffee mill grinding mechanism! Mechanism and well kit sold separately. Download our Free Coffee Mill Plan to build your own base, or use our ready-to-assemble Coffee Mill Kit bases (sold separately). Note: Wooden base not included. Cast Iron Wheel Grinding Mechanism and Coffee Mill Well Kit…

    5 Review(s)
    $29.99
  14. Wheel Coffee Mill Well Kit - Oak

    Wheel Coffee Mill Well Kit - Oak

    Coffee Mill Well Kit includes all the precut wood pieces you'll need to make the Coffee Mill project.The small drawer knob referred to in the instructions for the kit is now metal and included with the mechanism. The Cast Iron Wheel Grinding Mechanism hardware kit is sold separately

    4 Review(s)
    $57.99
  15. Turning Salt and Pepper Shakers and Mills, Book

    Turning Salt and Pepper Shakers and Mills, Book

    Create the smallest of projects you can be proud of with "Turning Salt & Pepper Shaker and Mills"! This colorful book provides step-by-step guidance through 30 projects, each rated by its level of difficulty, resulting in practical, beautiful pieces you'll use or give as gifts. Author Chris West…

    $24.95
  16. Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    …of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two with a palm sander is enough to remove any mill marks. Ideal for trimming cabinet face frames flush with the cabinet sides.

    $22.99
  17. Big Gator V-Drill Guide - Standard

    Big Gator V-Drill Guide - Standard

    …perfectly straight, perpendicular drill holes in round stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90° drilling into…

    2 Review(s)
    $24.99
  18. Bahco Cabinet Scrapers

    Bahco Cabinet Scrapers

    …scrapers cut paper-thin shavings to remove milling marks and deliver a flush final smoothing. Their Swedish-steel edges stay sharp longer than most scrapers. Available in two sizes, sold individually. Honing recommended before use. Optional 10" Smooth Mill File (12369, sold separately) is ideal for…

    5 Review(s)
    $9.99
  19. Mill Bastard Files

    Mill Bastard Files

    These mill bastard files feature a single cut—with parallel teeth running in one direction only—for a smooth finish and silky feel. They have the typical mill file shape: rectangular in cross section and tapering slightly in width from tang to end. Use for sharpening saws or for…

    From: $4.99
  20. Pen Mill Barrel Trimmers

    Pen Mill Barrel Trimmers

    Clear excess adhesive from your pen tubes and square up the ends of your pen in one easy step! These Pen Mill Barrel Trimmers measure 7/8" long and include hex wrenches for adjustment and replacement. They feature double hex-head screws for a secure connection to the Pilot Shaft.

    8 Review(s)
    From: $14.99
  21. Detailed Instruction Book for CrushGrind Mill Mechanism

    Detailed Instruction Book for CrushGrind Mill Mechanism

    This detailed instruction book for the CrushGrind Mill Mechanism (35401, sold separately) takes you through the entire process of making salt shakers and pepper mills on the lathe using the CrushGrind mechanisms. With full-size exploded views, color photos and step-by-step instructions. Softcover.…

    $9.99
  22. CS-18 Stand for Jet® Mill/Drills

    CS-18 Stand for Jet® Mill/Drills

    This stand provides a solid base for your Jet mill/drill. It is compatible with the following mill/drill models: JMD-15 (350017), JMD-18 (350018) and JMD-18PFN (350020).

    $329.00
  23. Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    The Jet® JMD-18 is a lighter, space-saving alternative to a dedicated milling machine. It combines a belt driven drill press with the dual coordinate abilities of the milling machine's moveable table, providing three microadjustable axes for precision results in a variety of metal machining…

    $2,299.00
  24. 8 ft x 10 ft Poly Tarp

    8 ft x 10 ft Poly Tarp

    * Perfect for taking camping, boating, hunting, or using on a construction site* Rugged, rust-resistant grommets on each corner* 5 mill thick

    3 Review(s)
    $7.99
  • Items 1 - 24 of 221
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X