Mini Metal Lathe

  • Grid List
  • Page:
    1. 1
  • Items 1 - 16 of 16
  • Page:
    1. 1
  1. 10'' Longworth Style Chuck

    10'' Longworth Style Chuck

    …and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring…

    1 Review(s)
    $139.99
  2. Nova Mini Step Jaw Set

    Nova Mini Step Jaw Set

    With stepped jaws for expanded capacity, these multi-purpose dual-grip jaws are ideal for gripping small- to medium-sized recesses in expansion, and smaller spigots such as pen blanks in contraction. Four jaws are included, each machined from a single piece of 1045 high tensile steel for the…

    $36.99
  3. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …provide more sliding surface without having to readjust. 5/8" diameter mounting post fits most mini and midi lathes. Technical Details:* 5/8" diameter mounting post fits most mini and midi lathes.* 5/16" round stainless steel tool rest.* Cast steel body with black epoxy finish.* Integrated mounting…

    5 Review(s)
    From: $19.99
  4. Nova Mini 20mm Jaw Set

    Nova Mini 20mm Jaw Set

    The Nova Mini Jaws are ideal for use with mini and midi lathes, and are capable of holding work below the size handled by the 25mm (1") jaws. They are designed to securely hold small bowls up to 6" in diameter, and small, free-end spigot turnings up to 5" long. They can be used in expansion mode for…

    $31.99
  5. Nova Mini Spigot Jaw Set

    Nova Mini Spigot Jaw Set

    These are powerful spigot jaws for smaller delicate work. The longer jaws provide the strong grip needed for small, unsupported spigot work, while the dovetail profile around the exterior of the jaws allows for expansion into small dovetailed recesses. Made from K1045 steel for maximum structural…

    $41.99
  6. Mini Jumbo Jaws for Oneway Scroll Chuck System

    Mini Jumbo Jaws for Oneway Scroll Chuck System

    …8-1/2" diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo Jaws can hold an…

    $102.99
  7. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …feature a molded rubber end for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    $69.99
  8. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Diamond Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    1 Review(s)
    $69.99
  9. Rockler Round Carbide Mini Turning Tool

    Rockler Round Carbide Mini Turning Tool

    …handles feature molded rubber for a secure, effortless grip and excellent ergonomics. Also Available from Rockler:* Diamond Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set Note: carbide cutters are not interchangeable between the different tools.

    1 Review(s)
    $69.99
  10. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    …length of Mini Turning Tools is approximately 13-1/2". Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule. Length of the shaft is approximately 4". Carbide cutters are not interchangeable between the different tools. * Diamond Carbide Mini Turning Tool…

    7 Review(s)
    $189.99 $119.99

    SAVE 37%

  11. Nova Cole Jaw Buffers

    Nova Cole Jaw Buffers

    Nova Cole Jaw Buffers are an accessory for the Nova Cole Jaws and Nova Mini Cole Jaws (45174 and 45274, sold separately). The buffers are designed to safely and securely hold your turned edge bowls and large diameter cylinders so you can make the finishing cuts to the bottom side. The kit includes…

    $26.99
  12. Nova G3 Insert Chuck

    Nova G3 Insert Chuck

    The Nova G3 Chuck is a four-jaw, self-centering scroll chuck for Mini and Midi lathes with up to a 16" swing over the bed. It's an excellent high-powered geared chuck with TuffLock™ grip for incredibly solid, vibration free performance. The single-handed operation means more time turning and…

    $149.99
  13. 16'' Longworth Style Chuck

    16'' Longworth Style Chuck

    …and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring…

    1 Review(s)
    $199.99
  14. Rockler Round Carbide Turning Tool Replacement Cutter -R1

    Rockler Round Carbide Turning Tool Replacement Cutter -R1

    …cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Round Carbide Mini Turning Tool or the Round Carbide Pen Turning Tool (both sold separately) to get smooth finishes on concave surfaces! Technical Details:* Ideal for…

    $17.99
  15. Diamond Carbide Turning Tool Replacement Cutter - D1

    Diamond Carbide Turning Tool Replacement Cutter - D1

    …cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Diamond Carbide Mini Turning Tool or the Diamond Carbide Pen Turning Tool (both sold separately) to get smooth finishes in detailed areas, such as those in spindle…

    $17.99
  16. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …in USA. Technical Details:* Compatible with lathe swing sizes from mini up to 20" with no additional hardware required.* With purchase of the 2" Lift Blocks (49120, sold separately below), the Multi-Rest can be used on even larger lathes.* The base of the MultiRest has independently…

    $359.95
  • Grid List
  • Page:
    1. 1
  • Items 1 - 16 of 16
  • Page:
    1. 1
Feedback X