Mini Turning Tools

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
  1. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    …between the different tools. * Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles. Overall length of the diamond cutter is 1-1/8". Angle of diamond cutter is approximately 35 degrees.* Square Carbide Mini Turning Tool is ideal for flat or convex…

    7 Review(s)
    $189.99 $119.99

    SAVE 37%

  2. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    5 Review(s)
    From: $19.99
  3. Crown 5-piece Mini Turning Tool Set

    Crown 5-piece Mini Turning Tool Set

    …this Crown Mini Turning Set. With five of the most popular turning tools, this set is perfect for the beginning woodturner. Tools are pre-honed for immediate use. All are made of high speed steel to hold an edge and last longer. Set includes:* 1/8" Gouge* 1/4" Gouge* 1/16" Parting tool* 1/4" Round…

    $132.99
  4. FlexCut® 3-Pc. Chip Carving Set

    FlexCut® 3-Pc. Chip Carving Set

    …create intricate geometric or freestyle patterns! They're also ideal for carving names on boxes, address blocks, wall plaques, and other objects, turning your project into a personalized keepsake. You get a Chip Carving Knife, Mini-Chip Carving Knife, and a Skew Knife, all with carbon-steel blades…

    $56.99
  5. Rockler Round Carbide Mini Turning Tool

    Rockler Round Carbide Mini Turning Tool

    …handles feature molded rubber for a secure, effortless grip and excellent ergonomics. Also Available from Rockler:* Diamond Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set Note: carbide cutters are not interchangeable between the different tools.

    1 Review(s)
    $69.99
  6. Robert Sorby 3-Piece Pen Turning Set

    Robert Sorby 3-Piece Pen Turning Set

    Create pens, lace bobbins, or other small decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! * Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemaster* Designed for use on a mini lathe or for work on smaller projects* Each tool has an overall length of 10"

    $89.99
  7. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …feature a molded rubber end for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    $69.99
  8. Excelsior Mini Lathe

    Excelsior Mini Lathe

    turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability. To increase your spindle capacity to 38-1/2", just use the optional Mini Lathe…

    47 Review(s)
    $299.99 $199.99

    SAVE 33%

  9. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Diamond Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    1 Review(s)
    $69.99
  10. Rockler Round Carbide Turning Tool Replacement Cutter -R1

    Rockler Round Carbide Turning Tool Replacement Cutter -R1

    …Use it with the Round Carbide Mini Turning Tool or the Round Carbide Pen Turning Tool (both sold separately) to get smooth finishes on concave surfaces! Technical Details:* Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.* Cutter rotates,…

    $17.99
  11. Diamond Carbide Turning Tool Replacement Cutter - D1

    Diamond Carbide Turning Tool Replacement Cutter - D1

    …Carbide Mini Turning Tool or the Diamond Carbide Pen Turning Tool (both sold separately) to get smooth finishes in detailed areas, such as those in spindle turnings! Technical Details:* Ideal for giving you a smooth finish in tight areas, such as the detailed beads and coves in spindle turnings.*

    $17.99
  12. Square Radius Carbide Mini Turning Tool

    Square Radius Carbide Mini Turning Tool

    This Square Radius Carbide Mini Turning Tool from Rockler features a subtle 2'' radius that works perfectly for smoothing cuts. Additionally, the replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it…

    $69.99
  13. Square Carbide Mini Turning Tool Replacement Cutter - S1

    Square Carbide Mini Turning Tool Replacement Cutter - S1

    …in only seconds! Use it with the Square Carbide Mini Turning Tool (sold separately) for flat or convex areas on spindles and pen turnings. Technical Details:* Ideal for giving you a smooth finish on straight pieces such as pens and other mini turning projects* Cutter rotates giving you four fresh…

    $17.99
  14. Carter Hollow Roller™ Vessel Turning System

    Carter Hollow Roller™ Vessel Turning System

    …captive bar tool allowing you to focus on your work, and safely turn hollow forms and bowls using your own gouges and scrapers. The fully sealed bearing lubrication eliminates drag on the bar, giving you more control and a smoother flowing motion as you manipulate your turning tools. Constructed of…

    1 Review(s)
    $358.99
  15. Excelsior Mini Lathe Replacement Belt

    Excelsior Mini Lathe Replacement Belt

    Replacement belt for the Excelsior Mini Lathe (33207, sold separately). Available online only.

    1 Review(s)
    $9.99
  16. Laguna Mini Lathe Banjo Support Bracket

    Laguna Mini Lathe Banjo Support Bracket

    …for Laguna REVO 10 x 16 Mini Lathe. The Banjo Support Bracket is an accessory attachment for the Laguna REVO 10 x 16 Mini Lathe (#48234, sold separately). The bracket bolts onto your lathe to move the tool rest further away from the tail stock, increasing the bowl turning capacity of the REVO from…

    $49.99
  17. Festool CT MINI Dust Extractor (584156)

    Festool CT MINI Dust Extractor (584156)

    …with all existing CT MIDI filters, filter bags, cleaning sets, hoses, nozzles and other accessories.* Tool-triggered auto start turns on when connected tool is turned on, or manually with manual on-off switch.* Smooth start with infinitely adjustable electronic air flow control for convenient and…

    $450.00
  18. Mini Jumbo Jaws for Oneway Scroll Chuck System

    Mini Jumbo Jaws for Oneway Scroll Chuck System

    …8-1/2" diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo Jaws can hold an…

    $102.99
  19. Mini-Ligno E/D Moisture Meter

    Mini-Ligno E/D Moisture Meter

    …wood and the meter automatically turns on to provide a reading. Features a wide moisture range of 6-45% - low enough for professional furniture/cabinet makers and hardwood floor installers and high enough for construction-grade lumber, firewood, and wood turning blanks. Includes two standard 3/16"…

    5 Review(s)
    $119.99
  20. Carter Hollow Roller™ Mounting Stud 0625-35

    Carter Hollow Roller™ Mounting Stud 0625-35

    …Rikon Mini, and most Mini and Midi lathes with a 5/8" tool rest post. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Delta Midi, Jet Mini 1014, Jet Midi 1220, Nova Mercury, Rikon Mini, and most Mini and Midi lathes with a 5/8" tool rest…

    $26.29
  21. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    Carter's MultiRest™ provides three strong, helping hands for the most challenging of turnings: big bowls, long vessels, and narrow spindles. Slide the support wheels up against your turning project and flip on the lathe to enjoy unequaled stability and whisper-quiet operation. Each…

    $359.95
  22. Oneway Talon Chuck System

    Oneway Talon Chuck System

    This is an ideal chuck for owners of mini and mid-size lathes who want a power-grip, key-operated chuck. It's perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. The nickel-plated…

    6 Review(s)
    $213.50
  23. FlexCut® Tri-Jack Pro

    FlexCut® Tri-Jack Pro

    …to a mirror-like edge that turns out smooth shavings right out of the box, the Tri-Jack Pro™ is a new multi-tool in Flexcut's Carvin' Jack series. As itsname suggests, the Tri-Jack has three blades that lock in place: a roughing knife, a detail knife, and a mini cutting knife. The roughing…

    $89.99
  24. Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    …versatility to turn both small bowls and spindles with ease. The lathe is available in either the standard version, with six fixed spindle speeds, or in the variable speed version, with three adjustable speed ranges. When you're ready to turn your ideas into reality, the Jet 1015 mini lathe is a…

    $579.99
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X