Miter Gauge

  • Items 1 - 24 of 130
  • Page:
    1. 1
    2. 2
    3. 3
  1. Incra Miter 1000HD Miter Gauge

    Incra Miter 1000HD Miter Gauge

    This high-definition gauge has 180 positive stops for pin-point accuracy at every degree (with special stops at +/-22.5°), plus a micro-adjustable vernier scale for fine-tuning to 1/10°. Add to that the industry's smoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip…

    23 Review(s)
    $189.99 $119.99

    SAVE 37%

  2. Kreg™ Precision Miter Gauge System

    Kreg™ Precision Miter Gauge System

    …machine shops strive for!* Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say "goodbye" to mitered joint gaps forever. Technical Details:* Factory calibrated and accurate right out of the box.* Micro-adjusts to 1/100th of a degree (.003" over 6")…

    13 Review(s)
  3. Incra Miter Gauge V27

    Incra Miter Gauge V27

    …affordable Incra miter gauge ever!* Engineered to provide high performance for your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better miter gauge. Technical Details:* Features exclusive AngleLock indexing system* Adjustable GlideLock miter bar with…

  4. Incra® Miter V120 Gauge

    Incra® Miter V120 Gauge

    …operation with this premium miter gauge. Laser-cut AngleLOCK stops in 1° increments from +/- 60° (plus special stops at +/- 22.5°) give you ultra-fine precision across the board, while a GlideLOCK miter bar adjusts for a no-slop fit in any standard miter slot. The V120 offers the…

    18 Review(s)
  5. Incra® Miter 1000SE with Telescoping Fence

    Incra® Miter 1000SE with Telescoping Fence

    Achieve mitering accuracy that you never thought possible! Special Edition miter gauge comes with sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table.* Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle…

    6 Review(s)
  6. Incra Miter Gauge 1000

    Incra Miter Gauge 1000

    …67-1/2 °.* GlideLOCK Miter Bar with six expansion points allows you to adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard (or near standard) miter gauge channels. This means the bar won't wiggle around in the miter slot!* With 18" Incra track…

  7. 45 Degree Miter Sled

    45 Degree Miter Sled

    Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in…

    85 Review(s)
  8. Incra Build-It System Components

    Incra Build-It System Components

    …a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign at any…

    2 Review(s)
    From: $10.99
  9. Portable Cross Cut Sled

    Portable Cross Cut Sled

    …of the platform and fence.* MDF Fence face can be removed for replacement.* Nylon set screws in the miter bar are adjustable to eliminate slop.* Adjustable 90° stop.* Requires standard miter track (3/4" wide x 3/8" deep) For complete zero-clearance support on both sides of the blade, pair the…

    13 Review(s)
  10. Master Plate with Super Bar

    Master Plate with Super Bar

    …flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout on routers, drill presses, and…

    10 Review(s)
    From: $49.99
  11. Tablesaw CrossCut Sled

    Tablesaw CrossCut Sled

    …face can be removed for replacement.* Spring-loaded ball bearings in the miter bar have adjustable tension to eliminate slop.* Adjustable 90° stop.* Requires standard miter track 3/4" w x 3/8" deep* Right edge of miter bar is 6" from right edge of un-cut platform. Optional Crosscut Sled Drop-Off…

    91 Review(s)
  12. Incra Miter Express Miter Sled

    Incra Miter Express Miter Sled

    …precision a snap.* Safely doubles any miter gauge's crosscut range up to 24" and eliminates all side play to improve your miter gauge's performance.* True zero-clearance tearout control on both sides of the table.* Works with any brand of miter gauge. Miter gauge not included. For extra-large…

  13. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …Shooter Board Squaring Jig* Tenoning Jig Features:* (1) Large Build-It Panel* (1) Small Build-It Panel* (2) 18" T-Slot Panel Connector* (1) 18" Miter Slider* (1) Build-It Clamp* (1) pr. Build-It Brackets* (1) set of 8 Build-It Knobs* (1) 18" T-Track Regular* (1) 18" T-Track Plus* (5) Free Jig Plans

    2 Review(s)
  14. Segmented Bowl Setup Angles

    Segmented Bowl Setup Angles

    …segments? Now you can take the guesswork out of your next setup! Set of seven angle blocks allow you to quickly and accurately set up your miter gauge or blade angle to cut precise segmented bowl pieces.* Compare to aluminum angle blocks that cost $100 more!* Includes 45° block (for 4 segments),…

    3 Review(s)
  15. Rockler 36'' Miter Track

    Rockler 36'' Miter Track

    …accept a smooth-sliding miter gauge. This 36" miter track is constructed of 100% aluminum for excellent durability without the weight. The track fits into a 1" x 1/2" deep dado, and accepts a standard 3/4" x 3/8" miter bar. For fast, trouble-free installation, the miter track comes pre-drilled and…

  16. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    The Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
  17. Miter Slot Hardware Kit

    Miter Slot Hardware Kit

    …table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. Hardware kit allows you to make your own jigs and hold-downs. * 4-3/4" long slot bars fit both square and T-shaped miter gauge slots, and expand in the slot as you tighten the knob.* Kit includes two slot…

    27 Review(s)
  18. Incra Miter 5000 Sled

    Incra Miter 5000 Sled

    The ultimate miter cutting workstation for the table saw!* Three-panel miter sled with patented Incra incremental angle control delivers perfect, repeatable accuracy.* Includes 36"-64" telescoping miter fence and dual flip stop.* With 364 precision indexed angle stops over +/-90° to produce…

    6 Review(s)
  19. CrossCut Sled Drop-Off Platform

    CrossCut Sled Drop-Off Platform

    …drop-off pieces from sagging at the end of the cut, it prevents them from splitting off unpredictably, and from getting jammed in the throat plate. Easy to use - just slide it into the miter track and lock in place with a single screw. Measures 10"W x 23-3/4"L x 1/2"Thick. MDF with melamine coating.

    4 Review(s)
  20. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Get the tool alignment and adjustment gauge Fine Woodworking magazine calls "the best we've seen." From spindle and arbor runout to blade alignment, dado depth, router bit height and more, the Betterley UNA-GAUGE packs an amazing range of measurement capabilities into a single tool. Features:*…

    3 Review(s)
  21. Laguna Tools Platinum Series Universal Sliding Table System

    Laguna Tools Platinum Series Universal Sliding Table System

    …x 16" (222 mm x 406 mm)* Support legs: 2* Miter gauge length: 31" (787 mm)* Miter gauge extension: 10" (total length 41") 254 mm (total length 1041 mm)* Miter gauge stops: +45°, 90°, -45°* Miter gauge range: +50° to -50°* Miter gauge flip stops: 1* Table fixing method: 3 fixing…

  22. Jet® Shaper with 1/2'' & 3/4'' Spindles

    Jet® Shaper with 1/2'' & 3/4'' Spindles

    …Voltage: 230 V* Motor Current: 16 A* Motor Phase: 1 Ph Standard Equipment:* 1/2" and 3/4" interchangeable spindles* Workpiece hold-downs* T-slot mitre gauge* Micro-adjustable fence* Rigid, one-piece closed stand* Cutter guard* 4" dust port* 7" x 25" cast iron extension wing

    0 Review(s)
  23. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    …Table Tops have been newly redesigned with a dual-track miter slot in the table, and a whiter, brighter finish for improved visibility. The 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, such as the Incra gauge, while the adjacent universal T-track accepts stops,…

    1 Review(s)
  24. iGaging Digital Miter Saw Gauge

    iGaging Digital Miter Saw Gauge

    When fine tuning miters, a little "error" can add up to a lot of "air" in your joints. But this easy-to-read digital gauge solves the problem by furnishing any miter saw with ultra-fine 0.05° resolution within +/- 0.001" accuracy. Unlike the gauge on your saw, when this gauge says 45°, it…

    1 Review(s)
    $52.99 $26.49

    SAVE 50%

  • Items 1 - 24 of 130
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X