Miter Jig

  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in…

    85 Review(s)
    $25.99 $14.99

    SAVE 42%

  2. Incra® Miter Slider Bars

    Incra® Miter Slider Bars

    …repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs. Make your own featherboards, small and large crosscut boxes, 45° miter jig and your own jig designs. Won't warp, swell…

    From: $18.59
  3. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    …out flush to the blade, preventing drop-off pieces from splitting off unpredictably or getting jammed in the throat plate. Additional features:* Aluminum miter bar has adjustable nylon set screws to ensure a snug fit in the miter track.* Locking clamp on miter bar tightens with a single screw.

    2 Review(s)
    $28.99 $9.99

    SAVE 66%

  4. Bench Dog® Crown-Cut

    Bench Dog® Crown-Cut

    …and cove molding, giving you perfect miters, every time. What's the secret? Crown-Cut holds the molding at its intended angle while you cut it. No more compound cuts and tedious trial and error! Before Crown-Cut, miscalculated compound cuts produced sloppy miters that screamed for caulk and paint.…

    9 Review(s)
    $27.99
  5. Rockler Speed-Cope Crown Molding Jig

    Rockler Speed-Cope Crown Molding Jig

    …and base molding the easy way with this innovative jig. Speed-Cope™ lets you make tricky cope cuts with ease, for perfect molding faster. It adjusts to handle most molding up to 7-1/4" wide, 45° and 90° inside miters, flat miters, and base, chair, and panel moldings. Includes free…

    3 Review(s)
    $149.99
  6. Carter Accuright® Log Mill™

    Carter Accuright® Log Mill™

    …lets you make repetitive cuts or use with a stationary fence on your saw as a jig for same-thickness cuts* Turns raw logs into beautiful, ready-to-use lumberIncludes:* Heavy-duty steel frame* MDF log mill platform* Steel miter bar* Front clamping assembly* Back locking jaw* Self-adhesive Mylar slide…

    3 Review(s)
    $139.95
  7. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …modified to suit your needs.* Adjustable Angle Crosscut Jig* Coping Sled* Disc Sander Jig* Shooter Board Squaring Jig* Tenoning Jig Features:* (1) Large Build-It Panel* (1) Small Build-It Panel* (2) 18" T-Slot Panel Connector* (1) 18" Miter Slider* (1) Build-It Clamp* (1) pr. Build-It Brackets* (1)…

    2 Review(s)
    $146.99
  8. Trim-Loc™ Installation Tool

    Trim-Loc™ Installation Tool

    …perfect alignment and consistent 3/16" reveals every time! * Tape measure hook slots let you easily measure jamb openings and trim stock for perfect miters every time. Layout, mark and cut all the trim pieces at once. * Features precision-machined 45º and 90º guides to mark cut lines. *…

    $12.99
  9. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x 7-3/4".*…

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  10. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …any point along the miter track.* Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples.* Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest rips* Measures 5-1/4"W x 8"L.* The jig is stationary, while…

    104 Review(s)
    $26.99
  11. Micro Jig ZeroPlay® Stop ZP9-S1

    Micro Jig ZeroPlay® Stop ZP9-S1

    More than just a miter stop! Small and versatile, this stop can also lock a jig in place or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits standard 3/4" x 3/8" T-Style miter slots.

    $7.39
  12. Rockler Miter Slot Hardware Kit

    Rockler Miter Slot Hardware Kit

    Make your own jigs and hold-downs!* Excellent for attaching featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. Hardware kit allows you to make your own jigs and hold-downs. * 4-3/4" long…

    27 Review(s)
    $7.99
  13. Rockler Cove Cutting Table Saw Jig

    Rockler Cove Cutting Table Saw Jig

    Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the…

    17 Review(s)
    $89.99
  14. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    …exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector,…

    4 Review(s)
    $34.99
  15. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    The Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
    $119.99
  16. EasyCoper for Crown Molding

    EasyCoper for Crown Molding

    …to quickly and easily cope crown molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress. Coped crown molding is actually one piece of crown fitting over the other piece, instead of the two being mitered at the inside corner.* Handles up to 5-1/2" molding.* Durable…

    $47.99
  17. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …the miter bar that adjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut jigs, cutoff tables, taper jigs and more.* Aluminum won't warp, swell or shrink like wooden runners — jigs fit…

    12 Review(s)
    From: $19.99
  18. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is…

    68 Review(s)
    $117.99
  19. Jet® 17'' Floor Mount Drill Press

    Jet® 17'' Floor Mount Drill Press

    …provides a consistent drilling crosspoint on workpiece * Innovative extra large 14" x 18" work table features twin T-slot grooves for miter gauge or homemade jigs, table has lip designed edge for easy clamping of workpiece and a removable insert * Hinged metal belt and pulley cover provides easy…

    1 Review(s)
    $609.99
  20. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …the best system on the market for creating flush, miter, face type, t-type and edge-to-edge lamination joints using 3/8" dowels. Additionally, using simple shop made spacers, or precision machined spacers (2 included with the Dowelmax Jr), the jig can be adjusted to complete offset joints. The Jr.…

    1 Review(s)
    $99.00
  21. Micro Jig ZeroPlay® Guide Bar

    Micro Jig ZeroPlay® Guide Bar

    Each Micro Jig ZeroPlay Guide Bar is composed of two interlocking plastic bars that adjust laterally to theexact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. The ZeroPlay Guide Bar is a "One-Touch…

    $15.99
  22. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. * For compatibility, the near edge of your table's miter track must be…

    60 Review(s)
    $79.99 $59.99

    SAVE 25%

  23. Incra Build-It System Components

    Incra Build-It System Components

    …can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign…

    2 Review(s)
    From: $10.99
  24. Large Toggle Clamp Foot

    Large Toggle Clamp Foot

    …Swivel-action 1-5/8" diameter foot works great for clamping angled stock. Available in two stud lengths. The extra-long 6" foot is ideal for use on a miter gauge or wherever extended reach is needed. Includes nuts and washers. Clamps sold separately. * Standard 5/16"-18 TPI stud size works with most…

    4 Review(s)
    $3.99
  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X