Miter Slot

  • Items 1 - 24 of 100
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …table saws, router tables, workbenches and more! These solid aluminum bars have nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut jigs, cutoff tables,…

    12 Review(s)
    From: $19.99
  2. Rockler Miter Slot Hardware Kit

    Rockler Miter Slot Hardware Kit

    …with a standard 3/4" wide x 3/8" deep miter gauge slot. Hardware kit allows you to make your own jigs and hold-downs. * 4-3/4" long slot bars fit both square and T-shaped miter gauge slots, and expand in the slot as you tighten the knob.* Kit includes two slot bars, knobs with screws, and washers.

    27 Review(s)
    $7.99
  3. Bench Dog® Dual Track

    Bench Dog® Dual Track

    …has a unique stacked-slot design that accepts any accessory with 1/4" T-bolts, 1/4" T-bolts, or 1/4" hex bolts. Perfect for tables, fences, and even jigs. In addition to the Universal T-track, Dual-Track also includes a standard 3/4" x 3/8" slot for miter gauges. Mounting hardware not included.

    9 Review(s)
    $31.49
  4. Micro Jig ZeroPlay® Guide Bar

    Micro Jig ZeroPlay® Guide Bar

    …ZeroPlay Guide Bar is a "One-Touch Calibration" miter bar (9-1/2" in length) that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot for a perfect fit and smooth glide, even fits tricky Shopsmith™ or General's miter slots.

    $15.99
  5. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    …no-slop fit to the miter track.* Through-slots in the base allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and stops.* High-impact polycarbonate ensures durability and low-friction sliding.* Fits a standard 3/8" x 3/4" miter slot.* Measures 5-1/2"…

    85 Review(s)
    $14.99
  6. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. * For compatibility, the near edge of your table's miter track must be…

    61 Review(s)
    $59.99
  7. Flush Mount Miter Slot Hardware Kit

    Flush Mount Miter Slot Hardware Kit

    …you fix jigs to any standard miter slot — with no protruding knobto get in the way. Perfect for crosscut sleds or any jig requiring a smooth surface foroperation. Includes two expandable miter slot adapter to fit any standard 3/4" wide x 3/8" deepmiter slot, as well as 2 each of two different…

    2 Review(s)
    $6.99
  8. Bench Dog Tools® TiterMiter™ Miter Slot and Accessory Track

    Bench Dog Tools® TiterMiter™ Miter Slot and Accessory Track

    …accessories such as featherboards, stops and power switches. Made in USA. * Standard 3/4'' x 3/8'' t-bar miter slot fits most miter gauges* Track can also be adjusted to fit many undersized miter gauges, such as those from Sears and Ridgid* 1/4'' accessory T-tracks on both top and bottom* Heavy-duty…

    $49.99
  9. Bench Dog® Feather-Loc® (Pair) 40-011

    Bench Dog® Feather-Loc® (Pair) 40-011

    …the tension fast, easy, and repeatable. * Slides quickly into 1/4" T-tracks.* Featured on all Bench Dog® Tools fences, as well as most Rockler fences.* Sold as a pair.* Optional Miter Slot Adapter (27603, sold separately) allows you to secure Feather-Loc® to any 3/8" x 3/4" miter slot.

    2 Review(s)
    $29.39
  10. Incra Build-It System Components

    Incra Build-It System Components

    …a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign at any…

    2 Review(s)
    From: $10.99
  11. iGaging Digital Indicator

    iGaging Digital Indicator

    …The indicator unit is affixed to a slide bar for on-the-fly adjustment. The slide bar sits flat along the table surface when the miter bar is positioned in a miter slot. Indicator display is adjustable for easy reading during different applications. * Measurements display in inch, millimeter and…

    3 Review(s)
    $74.99
  12. Incra® Miter V120 Gauge

    Incra® Miter V120 Gauge

    miter slot. The V120 offers the precision of far more expensive miter gauges without the high price-point. Designed for smooth, slop-free use on a wide variety of tools, it includes a removable T-clip to ensure compatibility with any tool with a standard, or near standard, 3/4" x 3/8" miter slot

    18 Review(s)
    $84.99
  13. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly…

    4 Review(s)
    $34.99
  14. Mag-Dro® Mitre Slot Base

    Mag-Dro® Mitre Slot Base

    …of the Mag-Dro® Mitre Slot Base! Connects quickly and easily to any caliper and fits in the 3/4" slot on your table saw, router, bandsaw, and more.* Fits most 6" calipers* Connects and disconnects to your caliper in seconds* Can be used in a variety of 3/4" table slots or clamped or screwed to a…

    4 Review(s)
    $8.99
  15. Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    …fence to prevent workpieces from lifting during a cut. It features integral fittings for T-slots and includes a Miter Slot Adapter for tables and fences with standard 3/8" x 3/4" slots. Additional specifications and benefits:* Made with durable polymer.* Ergonomic T-knobs make for comfortable…

    14 Review(s)
    $16.79
  16. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x 7-3/4".* Constructed of 1/2" thick MDF.* Includes 36" miter bar.* Indexing…

    45 Review(s)
    $57.99
  17. Incra® Miter Slider Bars

    Incra® Miter Slider Bars

    …crosscut boxes, 45° miter jig and your own jig designs. Won't warp, swell or shrink (unlike wooden runners), so the jigs you build will fit perfectly time after time. Technical Details:* Available in 24" and 18" lengths.* Works with any standard 3/8" x 3/4" miter slot.* With easy to adjust…

    From: $18.59
  18. Master Plate with Super Bar

    Master Plate with Super Bar

    …flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout on routers, drill presses, and…

    10 Review(s)
    From: $49.99
  19. Kreg Precision Router Table System

    Kreg Precision Router Table System

    …the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the time. The fence also features two independent fence faces, and a shim system for jointing…

    1 Review(s)
    $499.00
  20. Rockler Adjustable Table Featherboard

    Rockler Adjustable Table Featherboard

    …against fence for a safer and cleaner cut when ripping, routing, or drilling. Ideal for use with any tool that has a standard 3/8" x 3/4" miter slot. Expandable miter track bars provide maximum holding power. Features two easy-to-grip star knobs to securely lock the featherboard in place. Technical…

    65 Review(s)
    $19.99
  21. Bench Dog® Miter Slot Adapter 10-012

    Bench Dog® Miter Slot Adapter 10-012

    This adapter attaches to a Bench Dog® Feather-Loc® featherboard (sold separately) to allow you to secure the Feather-Loc® to any 3/8" x 3/4" miter slot.

    2 Review(s)
    $11.59
  22. SawStop 30'' Out-Feed Table

    SawStop 30'' Out-Feed Table

    …the CNS Contractor Saw, providing 30" of additional outfeed support. The table is constructed of 3/4" polyurethane coated MDF with machined miter gauge slots and all steel hardware. Table includes black powder-coated legs with adjustable feet to ensure a level work surface. Specifically engineered…

    $99.00
  23. Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    …The end result? A long working life of incredibly smooth operation. Plus, it's loaded with features: * Dual T-tracks in the table: a standard miter slot and a Universal T-track for accessories.* Cast iron table top measures 24" x 32" x 1-1/2" - over 5 square feet of surface area.* Universal T-tracks…

    $899.99
  24. Rockler 4-Piece Safety Kit

    Rockler 4-Piece Safety Kit

    …exclusive magnetic push stick with ergonomic handle for table saw and router table use; 2 angled push blocks for jointer and router table applications; plus table featherboard that fits standard 3/4" x 3/8" miter slots with expandable miter track bars for maximum holding power.

    31 Review(s)
    $29.99
  • Items 1 - 24 of 100
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X