Molding Plane

  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
  1. Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  2. Taunton's Complete Illustrated Guide to Sharpening

    Taunton's Complete Illustrated Guide to Sharpening

    …and the methods for getting sharp edges on all types of tools -- from basic chisels to molding planes and jointer knives. Among the subjects covered: * Choosing a sharpening system * Sharpening planes and saws * Touching up blades and bits * Shaping turning gouges * Honing carving tools About…

    $39.95
  3. Jet® 13'' Planer/Molder with Closed Stand

    Jet® 13'' Planer/Molder with Closed Stand

    …for planing* Knife-setting gauge for molding* Adjustment tools Planing* Three-knife cutterhead design produces a superior planed finish* Cutterhead features knife jacking screws for easy, accurate adjustmentMolding* Three-cutter design and extra slow feed rate produce ready-to-use molded stock*…

    1 Review(s)
    $1,119.99
  4. Rockler Back Cutter Router Bit - 2-1/8" Dia x 1/4" H x 1/4" Shank

    Rockler Back Cutter Router Bit - 2-1/8" Dia x 1/4" H x 1/4" Shank

    …frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The same goes for raised panels. Instead of planing off the back side, you can leave the panel at 3/4" thick and use the…

    0 Review(s)
    $44.99
  5. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    …bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a long useful life.*…

    From: $34.97
  6. SandFlex Flexible Abrasive Blocks

    SandFlex Flexible Abrasive Blocks

    …rub firmly. The sanding blocks can even be carved and shaped to match contours such as for moldings or for turned bowls. They are ideal for polishing your cast iron power tool tables, chisels and plane blades, and they make incredibly quick work of shining up a stainless steel sink! Technical…

    1 Review(s)
    $7.99
  7. Bahco Ergo Pocket Scraper

    Bahco Ergo Pocket Scraper

    The Bahco Ergo Pocket Scraper is ideal for removing paint or putty from windows, window frames, molding, and narrow corners. The triangular blade has three straight sharp edges, ensuring a long work life. A thumb grip handle makes the scraper easy and comfortable to use. Comes with a convenient belt…

    2 Review(s)
    $24.99
  8. Raintight Motion Sensor Switch

    Raintight Motion Sensor Switch

    …minimum load requirements, 120VAC. Also available in white.Precision-molded curved lensUnlike other thin flat lenses, the NightGUARDIAN lens is molded into a curve, so it is distortion free and water-tight. No false triggering either due to distortion or moisture problems. In fact, the entire…

    $71.99
  9. UltraEYE 300W Halogen Sensor Light - Black

    UltraEYE 300W Halogen Sensor Light - Black

    …override* Lifetime Warranty* Manufacturer: Steinel America Precision-molded curved lensUnlike other thin flat lenses, the NightGUARDIAN lens is molded into a curve, so it is distortion free and water-tight. No false triggering either due to distortion or moisture problems. In fact, the entire…

    $92.69
  10. UltraEYE 300W Halogen Sensor Light

    UltraEYE 300W Halogen Sensor Light

    …override * Lifetime Warranty * Manufacturer: Steinel America Precision-molded curved lensUnlike other thin flat lenses, the NightGUARDIAN lens is molded into a curve, so it is distortion free and water-tight. No false triggering either due to distortion or moisture problems. In fact, the entire…

    $92.69
  11. Three Blade Shavehook

    Three Blade Shavehook

    …cutter and 1-3/16" cove cutter, vee blade area 1-7/8" x 1-3/4". Short flat area is 7/8".* Use the teardrop and combination shavehooks for concave, convex and shaped surfaces such as moldings.* Blade should be perpendicular to the surface and drawn toward you.* Ergonomic, comfortable grip handle.

    8 Review(s)
    $15.49
  12. Black Palm by the Piece

    Black Palm by the Piece

    …deep brown backdrop and flecks of black. It is hard, extremely durablebut not as heavy as one would expect. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides…

    2 Review(s)
    From: $17.49
  13. East Indian Rosewood by the Piece

    East Indian Rosewood by the Piece

    …its rich dark tone and gorgeous striped figure. Its high resin content allows you toattain a fine polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boardsare well-suited for edging, veneering, marquetry, sides…

    From: $19.99
  14. Purpleheart by the Piece-1/8" Thickness

    Purpleheart by the Piece-1/8" Thickness

    …sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Alternate name: Peltogyne.* Tree: Usually tall, with a height…

    16 Review(s)
    From: $4.99
  15. Purpleheart by the Piece-1/4" Thickness

    Purpleheart by the Piece-1/4" Thickness

    …sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Alternate name: Peltogyne.* Tree: Usually tall, with a height…

    16 Review(s)
    From: $4.99
  16. Purpleheart by the Piece-1/2" Thickness

    Purpleheart by the Piece-1/2" Thickness

    …sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Alternate name: Peltogyne.* Tree: Usually tall, with a height…

    17 Review(s)
    From: $9.99
  17. Purpleheart by the Piece-3/4" Thickness

    Purpleheart by the Piece-3/4" Thickness

    …sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Alternate name: Peltogyne.* Tree: Usually tall, with a height…

    17 Review(s)
    From: $10.49
  18. Cherry by the Piece-1/8" Thickness

    Cherry by the Piece-1/8" Thickness

    …similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides…

    5 Review(s)
    From: $4.99
  19. Cherry by the Piece-1/4" Thickness

    Cherry by the Piece-1/4" Thickness

    …similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides…

    5 Review(s)
    From: $4.99
  20. Cherry by the Piece-1/2" Thickness

    Cherry by the Piece-1/2" Thickness

    …similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides…

    7 Review(s)
    From: $7.99
  21. Cherry by the Piece-3/4" Thickness

    Cherry by the Piece-3/4" Thickness

    …similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides…

    5 Review(s)
    From: $7.99
  22. African Mahogany by the Piece-1/8" Thickness

    African Mahogany by the Piece-1/8" Thickness

    …rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and tear.* Turning: Easy - turned surfaces are usually clean.* Polishing characteristics: Good.* Steam…

    4 Review(s)
    From: $4.99
  23. African Mahogany by the Piece-1/4" Thickness

    African Mahogany by the Piece-1/4" Thickness

    …rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and tear.* Turning: Easy - turned surfaces are usually clean.* Polishing characteristics: Good.* Steam…

    4 Review(s)
    From: $7.99
  24. African Mahogany by the Piece-1/2" Thickness

    African Mahogany by the Piece-1/2" Thickness

    …rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and tear.* Turning: Easy - turned surfaces are usually clean.* Polishing characteristics: Good.* Steam…

    4 Review(s)
    From: $6.49
  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
Feedback X