Molding Bit

  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Horizontal Crown Moulding Bits, Cove

    Rockler Horizontal Crown Moulding Bits, Cove

    molding can be very expensive, which is why these bits will pay for themselves very quickly. Just one bit allows you to create your own coved crown moldings from 3/4" stock. Be sure to use a router table, and to sneak up on your final cutting depth with multiple passes. You'll have a crown molding

  2. Freud # 99-015 Face Molding Bit, 1-1/16'' Dia. x 1-5/8'' H x 1/2'' Sh.

    Freud # 99-015 Face Molding Bit, 1-1/16'' Dia. x 1-5/8'' H x 1/2'' Sh.

    Add architectural detail to your furniture, cabinets and millwork. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $53.47
  3. Freud # 89-152 5-Piece Round Over Router Bit Set, 1/2'' Shank

    Freud # 89-152 5-Piece Round Over Router Bit Set, 1/2'' Shank

    …over bits soften the edges of fine furniture.* With the 3/8" bearing installed, they function as beading bits for making simple, decorative edges on furniture and moldings.* Includes Freud's unique shadow box storage case, which can be hung on the wall or mounted on the bench to keep bits handy…

    $117.97
  4. Back Cutter Router Bit

    Back Cutter Router Bit

    This relief cutter provides a safe, economical way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The…

    0 Review(s)
    $44.99
  5. No Drip Edge Router Bit

    No Drip Edge Router Bit

    …objects. In addition, the round over is pleasing to the eye and to the touch, and provides a comfortable edge to rest against. The bearing guide makes the bit easy to use. Simply apply a separate edge molding with enough projection for the profile, then rout along the edge to create the drip rail.

    0 Review(s)
    $47.99
  6. Beaded Base Molding Bit

    Beaded Base Molding Bit

    Use this bit to cut neatly tapered case moldings and baseboard moldings. When set with the guide bearing running against the material, the bit routs a small bead at the bottom of the molding—a subtle detail that looks great with or without a separate shoe molding.

    $84.99
  7. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …holes, even holes that are actually smaller than the base of the router! CRB can rout circles from 3/4" to 8-3/4" radius, using a 1/4" straight bit.* Offset Base Plate: Increases overall router stability. * CRB also moves the pivot hand that the router toward the center of the panel, reducing the…

    6 Review(s)
    $79.99
  8. Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank

    Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank

    This traditional crown molding profile features a 2-1/4" long cutter profile for a deep, detailed architectural appearance. You can also use it for other trim elements, such as for chair rails and case molding. 1-1/4" diameter x 2-1/4" cutter length x 1/2" shank.

    1 Review(s)
    $79.99
  9. Rockler French Traditional Router Bit

    Rockler French Traditional Router Bit

    With 1-11/16" of carbide height, this bit turns out attractive small- to medium-sized crown moldings, window and door casings, picture frames, and chair rails. The bit features two flutes and a 1/2" ball bearing guide.

    $49.99
  10. 3/4" Diameter X 1" High Molding Bit

    3/4" Diameter X 1" High Molding Bit

    Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, crown molding, door casings, trim, pilasters, window casing/sills, baseboards and picture frames, you can use the full profile, or just a portion of it to achieve the look you want.…

    1 Review(s)
    $37.99
  11. Rockler Restoration Beading Router Bits, 1/2" Shank

    Rockler Restoration Beading Router Bits, 1/2" Shank

    Our beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In…

    2 Review(s)
    From: $26.99
  12. Table Edge Bit, 1/2'' Shank

    Table Edge Bit, 1/2'' Shank

    With it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side of your panel to achieve…

    $79.99
  13. Specialty Molding Bit

    Specialty Molding Bit

    Whether for edge profiling tops or doors, or routing separate moldings, this router bit will give you impressive results. Rockler router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on…

    $95.39
  14. Freud Half Round Router Bits

    Freud Half Round Router Bits

    Produce a fully rounded edge on dimensional lumber or create an attractive half-round profile on furniture and moldings with this bit. Guiding device must be used. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    From: $46.47
  15. Freud Base Cap Bits

    Freud Base Cap Bits

    …"mop" boards and attractive base cap moldings! This router bit is ideal for renovators and homeowners who need to match extra-high base moldings in older homes. The bits can be used to rout base cap only, or to profile the edge of wide base molding. The wood species is up to you—use…

    1 Review(s)
    $67.47
  16. Freud Crown Molding Bits

    Freud Crown Molding Bits

    Application: Elaborate crown moldings * Customize your decorative crown moldings to add elegance to any room. * Simply adjust the height of your cut to change the entire profile. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers and…

    2 Review(s)
    $68.97
  17. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    This panel raiser creates beautiful raised panels for doors and wainscot paneling, but can also be used to shape table tops, plaques and molding. Revolutionary Quadra-Cut™ design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings…

    1 Review(s)
    $98.97
  18. Provincial Edge Bit

    Provincial Edge Bit

    Use this bit for applying a decorative edge, or to create moldings that are applied separately. You can leave shoulders on either side of the primary profile, or use only the triple round over section, which is 1/2" high. Two flute, 5/8" ball bearing guide.

    $54.99
  19. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …Pro Jig, 3/8" drill bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For…

    32 Review(s)
    $137.99
  20. Freud Cove and Bead Groove Bits

    Freud Cove and Bead Groove Bits

    This bit can be used to create ornamental edge profiles and decorative grooves in molding and furniture. For edge profiles, use it with an edge guide or router table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    $38.47
  21. Rockler Bead & Cove Bits for Canoe Building

    Rockler Bead & Cove Bits for Canoe Building

    …just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile. Dimensions listed are radiuses.…

    4 Review(s)
    From: $49.99
  22. Classic Multi-Form Router Bit

    Classic Multi-Form Router Bit

    This classic multi-form router bit enables you to make a wide variety of different profiles, including beads, coves and quarter rounds, with a single multi-purpose bit. Just adjust the cutter height and the fence position, and with two or more passes, the profile possibilities are almost unlimited.…

    2 Review(s)
    $52.99
  23. Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    A lower cove paired with an upper bead combine to give you a classic design that's perfect for decorative edging on cabinets, molding and furniture. In addition, Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even…

    13 Review(s)
    From: $40.47
  24. Drawer Pull Router Bit

    Drawer Pull Router Bit

    Use this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops…

    $49.99
  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X