Molding Cutter

  • Items 1 - 24 of 30
  • Page:
    1. 1
    2. 2
  1. Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    …difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as for beveling decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large…

    1 Review(s)
    From: $98.97
  2. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …router just once with a set of 4 injection molded shims.* Quick Change - Unlike most router jigs, the CRB7 can be fitted/removed in less than 10 seconds, with no fiddly screws or cantering jigs required.* Micro Adjuster - High precision router cutter position can be attained and repeated using…

    7 Review(s)
    $79.99
  3. Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    …beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited for moldings, picture frames, chairs, or any application where a decorative bead is required. 5/8" ball…

    3 Review(s)
    $46.99
  4. Rockler Classic Multi-Form Router Bit - 1-1/4" Dia x 1" H x 1/2" Shank

    Rockler Classic Multi-Form Router Bit - 1-1/4" Dia x 1" H x 1/2" Shank

    …router bit enables you to make a wide variety of different profiles, including beads, coves and quarter rounds, with a single multi-purpose bit. Just adjust the cutter height and the fence position, and with two or more passes, the profile possibilities are almost unlimited. Use with a router table.

    2 Review(s)
    $52.99
  5. Rockler Crown Moulding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    Rockler Crown Moulding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    Cuts a simple, elegant edge for molding that will add character to any room. 1-1/4" diameter, 2-1/4" cutter length, 1/2" shank, 1-1/2" shank length.

    1 Review(s)
    $84.99
  6. Jet® 13'' Planer/Molder with Closed Stand

    Jet® 13'' Planer/Molder with Closed Stand

    molded stock* Most 2" or under cutters can be installed without removing the planing knives* Over 40 standard molding cutter sets are available. Custom made cutter sets are also available for a wide variety of applications* Special gauge is included to assist in proper setup of molding cutters

    1 Review(s)
    $1119.99
  7. Rockler Crown Moulding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    Rockler Crown Moulding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    This traditional crown molding profile features a 2-1/4" long cutter profile for a deep, detailed architectural appearance. You can also use it for other trim elements, such as for chair rails and case molding. 1-1/4" diameter x 2-1/4" cutter length x 1/2" shank.

    1 Review(s)
    $79.99
  8. Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    …text, but it is perhaps most often used to create a panel door effect for painted MDF and solid wood. Roman Ogee in essence, the profile's radiused bottom gives a positive-negative effect to the cut shape of successive passes. It is also a great option for creating edge moldings. Twin-flute cutters.

    1 Review(s)
    From: $23.99
  9. Freud® Slot Cutter Arbors

    Freud® Slot Cutter Arbors

    …slot cutter featuring a 5/16" bore. For use on hand-held and table-mounted portable routers. * Each arbor is computer-balanced and precision-ground.* For premium performance use with Freud slotting cutters (e.g. 39518, sold separately), although the arbors are compatible with any slotting cutter

    $7.97
  10. Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    …with an upper bead combine to give you a classic design that's perfect for decorative edging on cabinets, molding and furniture. In addition, Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain…

    13 Review(s)
    From: $40.47
  11. Rockler Back Cutter Router Bit - 2-1/8" Dia x 1/4" H x 1/4" Shank

    Rockler Back Cutter Router Bit - 2-1/8" Dia x 1/4" H x 1/4" Shank

    This relief cutter provides a safe, economical way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The…

    0 Review(s)
    $44.99
  12. Freud # 38-362 Quadra-Cut Classical Cove & Bead Bit, 1-1/2" Dia. x 5/8" H x 1/2" Sh.

    Freud # 38-362 Quadra-Cut Classical Cove & Bead Bit, 1-1/2" Dia. x 5/8" H x 1/2" Sh.

    Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Decorative edging for cabinets, molding and furniture* Add distinctive design to cabinets, furniture,…

    $46.97
  13. Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/4" Shank

    Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/4" Shank

    Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Decorative edging for cabinets, molding and furniture* Add distinctive design to cabinets, furniture,…

    From: $37.47
  14. Freud® 99-003 Quadra-Cut™ Ogee Double Fillet Router Bit - 1-3/8" Dia x 9/16" H x 1/2" Shank

    Freud® 99-003 Quadra-Cut™ Ogee Double Fillet Router Bit - 1-3/8" Dia x 9/16" H x 1/2" Shank

    …The two primary cutters have an upward slicing action that reduces burning and improves chip ejection, while the two smaller cutters are angled downward to prevent chip-out and fuzzing at the edges. This ogee double fillet bit is ideal for applying a decorative edge on cabinet, molding and furniture…

    5 Review(s)
    $41.47
  15. Rockler Carbide Pen Turning Tool 3-Piece Set

    Rockler Carbide Pen Turning Tool 3-Piece Set

    …steel 1/8" parting tool, and two tools with replaceable carbide cutters: a 1/2" round cutter and a 1/2" square cutter with a 2" radius that produces an exceptionally smooth finish cut. Handles are solid ash encased in thick, molded rubber for excellent ergonomics and a sure grip. * Total overall…

    1 Review(s)
    $129.99
  16. Square Radius Carbide Mini Turning Tool

    Square Radius Carbide Mini Turning Tool

    …have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip…

    $69.99
  17. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    …Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer when compared to steel. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances your grip…

    6 Review(s)
    $189.99 $119.99

    SAVE 37%

  18. Full Size Square Radius Carbide Turning Tool

    Full Size Square Radius Carbide Turning Tool

    …close look at the edge of this carbide cutter and you'll realize it's not actually square. Instead, each of its four edges is slightly crowned with a 2'' radius. This subtle change makes the cutter excellent for smoothing cuts. The replaceable, rotatable cutter eliminates the hassle and downtime of…

    $99.99
  19. Rockler Round Carbide Mini Turning Tool

    Rockler Round Carbide Mini Turning Tool

    …grown dull.* The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life.* Shaft features a flattened back for stability when using the tool rest.* The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip…

    1 Review(s)
    $69.99
  20. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip…

    $69.99
  21. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip…

    1 Review(s)
    $69.99
  22. Full Size Round Ergonomic Carbide Turning Tool

    Full Size Round Ergonomic Carbide Turning Tool

    …have grown dull. The solid carbide cutter stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and…

    $99.99
  23. Full Size Square Ergonomic Carbide Turning Tool

    Full Size Square Ergonomic Carbide Turning Tool

    …have grown dull. The solid carbide cutter stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and…

    $99.99
  24. Full Size Diamond Ergonomic Carbide Turning Tool

    Full Size Diamond Ergonomic Carbide Turning Tool

    …have grown dull. The solid carbide cutter stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and…

    $99.99
  • Items 1 - 24 of 30
  • Page:
    1. 1
    2. 2
Feedback X