Molding Machine

  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
  1. Jet® 13'' Planer/Molder with Closed Stand

    Jet® 13'' Planer/Molder with Closed Stand

    …ready-to-use molded stock* Most 2" or under cutters can be installed without removing the planing knives* Over 40 standard molding cutter sets are available. Custom made cutter sets are also available for a wide variety of applications* Special gauge is included to assist in proper setup of molding

    1 Review(s)
    $1,119.99
  2. Rockler Router Fluting Jig

    Rockler Router Fluting Jig

    Repetitive flutes are a great way to add style to columns, molding or furniture parts, but machining them can be a true test of patience. Fortunately, this innovative jig makes it fast and easy to rout perfect flutes with even spacing — every time. Two low-friction, underside rails straddle…

    32 Review(s)
    $69.99
  3. Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

    Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

    …pair and add 20" to each side of the material handling roller fence allowing for easy processing of larger panels. Extensions enable full sized machines to easily cut panels larger than 10' in length quickly, accurately, and safely with just a single operator.* Vacuum: Fein Turbo II Vacuum shown in…

    From: $2,108.00
  4. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …iron-on edging flush with the panel. Features:* One Time Set Up - Set up the CRB7 to fit your favorite router just once with a set of 4 injection molded shims.* Quick Change - Unlike most router jigs, the CRB7 can be fitted/removed in less than 10 seconds, with no fiddly screws or cantering jigs…

    7 Review(s)
    $79.99
  5. DeWalt DW713 Heavy-Duty 10'' (254mm) Single-Bevel Miter Saw

    DeWalt DW713 Heavy-Duty 10'' (254mm) Single-Bevel Miter Saw

    Heavy-Duty 10" (254mm) Single-Bevel Miter Saw featuring:* Tall sliding fences support crown molding vertically 4-1/2" and easily slide out of the way for bevel cuts* Machined base fence support - maintains fence alignment for accurate cuts* Stainless steel detent plate with 11 positive stops…

    $219.00
  6. Trim-Loc™ Installation Tool

    Trim-Loc™ Installation Tool

    Trim work will go like clockwork with the only tool on the market used to measure, mark, and install casement trim. With preset reveals and built-in tape measure hook slots, you'll be able to quickly measure all of your trim lengths and accurately cut trim stock for professional results. You'll find…

    $12.99
  7. DeWALT DW717 Heavy-Duty 10'' (254mm) Double-Bevel Sliding Compound Miter Saw

    DeWALT DW717 Heavy-Duty 10'' (254mm) Double-Bevel Sliding Compound Miter Saw

    …crown up to 6-1/4"* Tall sliding fence supports up to 6" base molding to the left of blade and up to 3-1/2" to the right of the blade* Exclusive bevel-detent system - seven positive stops delivers fast accurate repeatable cuts* Machined base fence support keeps fence perpendicular with blade for…

    $556.99
  8. Black Palm by the Piece

    Black Palm by the Piece

    …speckled pattern, with a deep brown backdrop and flecks of black. It is hard, extremely durablebut not as heavy as one would expect. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging,…

    2 Review(s)
    From: $17.49
  9. Padauk by the Piece-3/4" Thickness

    Padauk by the Piece-3/4" Thickness

    …makes one of the most durable hardwood floors available. It is easily worked, takes an excellent finish and polishes beautifully. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending…

    12 Review(s)
    From: $9.99
  10. Miter Vise

    Miter Vise

    …can be rotated, swung and locked into the most convenient position to make fastening frames easy. The heavy casting is machined as one part, guaranteeing that the jaws will be in perfect alignment. Technical Details* Rotates 360 degrees* Tilts 90 degrees* Jaws accept moldings or boards up to 4" wide

    3 Review(s)
    $69.99
  11. African Mahogany by the Piece-1/8" Thickness

    African Mahogany by the Piece-1/8" Thickness

    …bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine…

    4 Review(s)
    From: $4.99
  12. Walnut by the Piece-1/2" Thickness

    Walnut by the Piece-1/2" Thickness

    …figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine…

    13 Review(s)
    From: $7.99
  13. Cherry by the Piece-1/8" Thickness

    Cherry by the Piece-1/8" Thickness

    …has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering,…

    5 Review(s)
    From: $4.99
  14. Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    …panels. To machine your parts, just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile.…

    4 Review(s)
    From: $49.99
  15. Sewing Machine Cabinet Plan

    Sewing Machine Cabinet Plan

    …but when it's not needed, it closes up neatly into a beautiful free-standing cabinet. From the finger-jointed drawers to the mitered door moldings, you'll find much to challenge you in this project. Chosen from among the most popular plans in the Woodworker's Journal, this selection includes…

    9 Review(s)
    $7.39
  16. Rockler Restoration Beading Router Bits - 1/2" Shank

    Rockler Restoration Beading Router Bits - 1/2" Shank

    …beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In bullnosing…

    2 Review(s)
    From: $26.99
  17. Walnut by the Piece-3/4" Thickness

    Walnut by the Piece-3/4" Thickness

    …figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine…

    12 Review(s)
    From: $8.49
  18. Purpleheart by the Piece-1/8" Thickness

    Purpleheart by the Piece-1/8" Thickness

    …All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine…

    16 Review(s)
    From: $4.99
  19. Poker Chip Box Molding with FREE Small Box Plan

    Poker Chip Box Molding with FREE Small Box Plan

    The machined, clear walnut molding is designed specially for use on small projects such as jewelry and music boxes or humidors. The machined, clear walnut molding is designed specially for use on small projects such as jewelry and music boxes or humidors. It's pregrooved for a 1/4' bottom and a bead…

    $36.79
  20. Sculpwood Moldable Epoxy Putty

    Sculpwood Moldable Epoxy Putty

    Replace damaged wood with this epoxy putty that can be molded, carved, and sanded — plus sawed, nailed, machined, stained, or painted! SculpWood is a 2-component, solvent free, kneadable epoxy resin product. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a…

    5 Review(s)
    From: $16.49
  21. DeWalt DW715 Heavy-Duty 12'' (305mm) Single-Bevel Compound Miter Saw

    DeWalt DW715 Heavy-Duty 12'' (305mm) Single-Bevel Compound Miter Saw

    …repeatable accuracy and worksite durability* Exclusive Precise Miter System and Machined Base Fence Support deliver increased cutting accuracy* Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way…

    $345.99
  22. FastCap SpeedTape Double-Sided Tape

    FastCap SpeedTape Double-Sided Tape

    FastCap's SpeedTape provides a clean, efficient way of applying veneer, edging and even small moldings with no messy overspray or expensive hot-melt edging machines. Just peel off the liner on one side, apply to the edge, peel off the other liner, and roll on your edging. The adhesive increases in…

    $10.49
  23. East Indian Rosewood by the Piece

    East Indian Rosewood by the Piece

    …countless guitars with its rich dark tone and gorgeous striped figure. Its high resin content allows you toattain a fine polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boardsare well-suited for edging,…

    From: $19.99
  24. African Mahogany by the Piece-1/4" Thickness

    African Mahogany by the Piece-1/4" Thickness

    …bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine…

    4 Review(s)
    From: $7.99
  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
Feedback X