Molding Router Bits

  • Items 1 - 24 of 63
  • Page:
    1. 1
    2. 2
    3. 3
  1. Specialty Molding Router Bit for Decorative Edges

    Specialty Molding Router Bit for Decorative Edges

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails. Features two flutes and ball bearing guides (3/8" guide for 91859, 1/2" guide for 91870).

    1 Review(s)
    From: $37.99
  2. Rockler French Traditional Router Bit

    Rockler French Traditional Router Bit

    With 1-11/16" of carbide height, this bit turns out attractive small- to medium-sized crown moldings, window and door casings, picture frames, and chair rails. The bit features two flutes and a 1/2" ball bearing guide.

    $49.99
  3. Freud Base Cap Bits

    Freud Base Cap Bits

    …"mop" boards and attractive base cap moldings! This router bit is ideal for renovators and homeowners who need to match extra-high base moldings in older homes. The bits can be used to rout base cap only, or to profile the edge of wide base molding. The wood species is up to you—use…

    1 Review(s)
    $67.47
  4. Rockler Horizontal Crown Moulding Bits, Cove

    Rockler Horizontal Crown Moulding Bits, Cove

    molding can be very expensive, which is why these bits will pay for themselves very quickly. Just one bit allows you to create your own coved crown moldings from 3/4" stock. Be sure to use a router table, and to sneak up on your final cutting depth with multiple passes. You'll have a crown molding

  5. Freud 84-126 Triple Fluting Bit

    Freud 84-126 Triple Fluting Bit

    …1/2" shank ensures a steady cut with minimal vibration, while the solid carbide cutting edges promise a long life with minimal burning. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    $56.97
  6. Edge Beading Router Bits-1/2" Shank

    Edge Beading Router Bits-1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $23.99

    SAVE 31%

  7. Freud # 99-015 Face Molding Bit, 1-1/16'' Dia. x 1-5/8'' H x 1/2'' Sh.

    Freud # 99-015 Face Molding Bit, 1-1/16'' Dia. x 1-5/8'' H x 1/2'' Sh.

    Add architectural detail to your furniture, cabinets and millwork. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $53.47
  8. Specialty Molding Router Bit 1" Diameter x 1-3/8" High x 1/2" Shank

    Specialty Molding Router Bit 1" Diameter x 1-3/8" High x 1/2" Shank

    Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of it to achieve the look you want. Features two…

    1 Review(s)
    $49.99
  9. Beaded Base Molding Bit

    Beaded Base Molding Bit

    Use this bit to cut neatly tapered case moldings and baseboard moldings. When set with the guide bearing running against the material, the bit routs a small bead at the bottom of the molding—a subtle detail that looks great with or without a separate shoe molding.

    $84.99
  10. Freud Quadra-Cut™ Bead Table Edge & Handrail Bits

    Freud Quadra-Cut™ Bead Table Edge & Handrail Bits

    …with another profile to create a custom design for railings and table edges.* For handrails, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    $101.97
  11. Cove Router Bits-1/2 Inch Shank

    Cove Router Bits-1/2 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $25.99
  12. Freud Half Round Router Bits

    Freud Half Round Router Bits

    …profile on furniture and moldings with this bit. Guiding device must be used. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Use on hand-held and table-mounted portable routers.

    From: $46.47
  13. Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    …crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    13 Review(s)
    From: $40.47
  14. Back Cutter Router Bit

    Back Cutter Router Bit

    This relief cutter provides a safe, economical way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The…

    0 Review(s)
    $44.99
  15. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …even holes that are actually smaller than the base of the router! CRB can rout circles from 3/4" to 8-3/4" radius, using a 1/4" straight bit.* Offset Base Plate: Increases overall router stability. * CRB also moves the pivot hand that the router toward the center of the panel, reducing the chance of…

    6 Review(s)
    $79.99
  16. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    This ogee panel raiser is ideal for creating raised panels for doors and wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut™ design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an…

    1 Review(s)
    $104.47
  17. Table Edge Bit, 1/2'' Shank

    Table Edge Bit, 1/2'' Shank

    With it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side of your panel to achieve…

    $79.99
  18. Rockler Bead & Cove Bits for Canoe Building

    Rockler Bead & Cove Bits for Canoe Building

    …just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile. Dimensions listed are radiuses.…

    4 Review(s)
    From: $49.99
  19. 1-1/6" Diameter X 1-5/8" High Molding Bit

    1-1/6" Diameter X 1-5/8" High Molding Bit

    Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of it to achieve the look you want. Features two…

    1 Review(s)
    $54.99
  20. Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank

    Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank

    Cuts a simple, elegant edge for molding that will add character to any room. 1-1/4" diameter, 2-1/4" cutter length, 1/2" shank, 1-1/2" shank length.

    1 Review(s)
    $84.99
  21. 2-1/2'' Table Top Edge Bit, 1/2'' Shank

    2-1/2'' Table Top Edge Bit, 1/2'' Shank

    With it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side to achieve different visual…

    1 Review(s)
    $69.99
  22. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    This panel raiser creates beautiful raised panels for doors and wainscot paneling, but can also be used to shape table tops, plaques and molding. Revolutionary Quadra-Cut™ design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings…

    1 Review(s)
    $98.97
  23. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Use this high-performance 2-3/4" diameter cutter for creating raised panels for doors and wainscoting, as well as decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ four-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with…

    $98.97
  24. Freud Quadra-Cut™ Cove and Bead Bits - 1/4'' Shank

    Freud Quadra-Cut™ Cove and Bead Bits - 1/4'' Shank

    …materials. Application: Decorative edging for cabinets, molding and furniture* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    From: $37.47
  • Items 1 - 24 of 63
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X