Mortice Bit

  • Items 1 - 24 of 91
  • Page:
    1. 1
    2. 2
    3. 3
  1. Mortise Chisel Bit 1/2"

    Mortise Chisel Bit 1/2"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/2 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $27.59
  2. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …mortises * Gas cylinder controlled rack and pinion system for smooth head raising and lowering * Hinged chuck door allows easy access for quick bit changes * Quick adjust depth stop for uniform mortise depths * Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes * Handwheels…

    1 Review(s)
    $1274.99
  3. Jet® Benchtop Mortising Machine

    Jet® Benchtop Mortising Machine

    …handle let you reposition the feed handle for easier operation and optimum handle position* Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks* Two hinged side doors allow easy access to the drill chuck* Quick adjust depth stop for uniform mortise depths*…

    2 Review(s)
    $354.99
  4. DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    …tabs and adjustable clamp make adjustments a snap. 1/4'' collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes. * Router Type: Combination (Fixed & Plunge) * Power Used (Amps): 7 * Operating Input Voltage: 110 volt…

    $273.48
  5. Mortise Chisel Bit 1/4"

    Mortise Chisel Bit 1/4"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/4" mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $34.49
  6. Up-Cut Spiral Mortising Router Bits

    Up-Cut Spiral Mortising Router Bits

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  7. 3-Piece Mortise Chisel Sharpening Set

    3-Piece Mortise Chisel Sharpening Set

    Keep hollow mortising chisel edges sharp for fast and efficient cutting!* Diamond-coated abrasives hone the hardest steel, including carbide.* Cone shape puts the final edge on inside bevels.* Sharpens mortising chisels up to 1/2" size.* Set includes handle, 1/4" quick-change chuck, 2 diamond cones…

    20 Review(s)
    $49.49
  8. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …Pro Jig, 3/8" drill bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For…

    32 Review(s)
    $137.99
  9. 3/8'' Beadlock® Basic Starter Kit

    3/8'' Beadlock® Basic Starter Kit

    …cabinet doors.* Includes four .060" shims, two .030" shims, 3/8" HSS Drill Bit and a molded plastic case with added space for the optional accessory kits.* All Accessory Kits include corresponding guide block, HSS drill bit and shim set. Technical Details:* Beveled cutout in the drill plate allows…

    29 Review(s)
    $29.99
  10. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …FMT uses just one bit, one guide and one setup for every standard joint. It's that easy. There are no bit or guide changes to fuss with and the setup stays the same for both parts of the joint. Joint fit is easily adjusted for perfect results every time. Super FMT guides and bits allow you to create…

    3 Review(s)
    $529.00
  11. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router bits.

    $383.99
  12. 3-Piece Countersink Bit Set for Log Tenon Cutters

    3-Piece Countersink Bit Set for Log Tenon Cutters

    …2" diameter hole with a forstner bit, then use this countersink bit (with the appropriate guide bore) to create a perfectly shaped shoulder. Set includes the triangular blade, a 1" diameter shaft, 1-1/2" and 2" guide bores, and an allen wrench for assembling the bit and changing bores. 1/2" shank.

    1 Review(s)
    $169.00
  13. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    …at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x 3/4" and 1/2" x 1". Additional sizes can be routed using table limit stops and different bit sizes. Note: New FMT guides not exactly as shown.

    $29.99
  14. Mortise Chisel Handle

    Mortise Chisel Handle

    Cut clean mortises by hand! This Mortise Chisel Handle makes it easy and accurate! Simply start your mortise by drilling holes with your Forstner bit. Then clean-up the mortise using this 6-1/2" solid Ash handle and any mortising chisel with a 5/8" shank. Cuts clean, precise mortises where mortising…

    1 Review(s)
    $14.49
  15. Powermatic® Benchtop Deluxe Mortiser

    Powermatic® Benchtop Deluxe Mortiser

    …or more precise. The new POWERMATIC® 701 Benchtop Mortiser features an integrated bit and chisel spacer system. These two spacers are used to accurately and quickly account for the space needed between the bit and chisel during set-up. Large work surfaces in the table and fence allow for more…

    1 Review(s)
    $489.99
  16. Leigh Square Tenon Guides

    Leigh Square Tenon Guides

    …3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All square tenons are routed with a 1/2" router bit. Note: New FMT guides not exactly as shown. Technical Details:* Includes 1/4", 5/16", 3/8" and 1/2" square tenon sizes.* Routed with a 1/2" bit.

    $72.49
  17. Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $4.99

    SAVE 50%

  18. 3/8'' Beadlock® Tenon Bit

    3/8'' Beadlock® Tenon Bit

    …money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up…

    1 Review(s)
    $51.99
  19. 30mm Easy Mortise Hinges

    30mm Easy Mortise Hinges

    Featuring a Bronze finish, these 30mm mortise hinges are both a good value and easy to install. Ideal for folding doors. Technical Details:* Open size is 1-15/16" Long x 1-3/16" Wide* Bronze finish* Packaged in pairs, screws included* 30mm carbide Forstner bit sold separately

    4 Review(s)
    $3.69
  20. Leigh ACMTC Accessory Kit

    Leigh ACMTC Accessory Kit

    …accessories for your Leigh FMT Mortise and Tenon Jig with this value-priced bundle! It includes a boxed-set of all the standard bits for the FMT-eight solid carbide bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise…

    1 Review(s)
    $379.00
  21. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …on the base of the mortise for the wedge ring to rest in. Using the 1/2" Tenon-Lok™ Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill,…

    2 Review(s)
    $25.49
  22. Freud Entry/Interior Door Ogee Bit Set

    Freud Entry/Interior Door Ogee Bit Set

    …tenon structure that will last a lifetime! Matched ogee profile bits come fully assembled and ready to make beautiful rail and stile joints. Mill a tenon of any length simply by unscrewing the top cutter and bearing of the rail bit from the lower cutter and shank. Create 1-3/4" joints for exterior…

    $207.97
  23. Kreg DVD: The Pocket Hole Solution to Trim Carpentry

    Kreg DVD: The Pocket Hole Solution to Trim Carpentry

    …learn more about Pocket Hole Joinery! Pocket Hole Joinery is a relatively new joinery technique that uses a special Pocket Hole Jig, step drill bit, and self-tapping screws to produce strong, tight-fitting wood joints in a fraction of the time of more traditional methods such as doweling,…

    1 Review(s)
    $10.49
  24. Mortise Chisel Bit 3/8"

    Mortise Chisel Bit 3/8"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 3/8 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $28.69
  • Items 1 - 24 of 91
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X