Mortise And Tenon

  • Items 1 - 24 of 79
  • Page:
    1. 1
    2. 2
    3. 3
  1. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router bits.

    $383.99
  2. Rockler Beadlock® Pro Joinery Kit

    Rockler Beadlock® Pro Joinery Kit

    …smooth-sided mortises. Just pop the included paring block into the jig to provide an accurate guide for your chisel. With a 3-1/2" width capacity, it will easily handle the large joints found in tables, chairs and big casework. Slide the guide block along the rails to place your mortise precisely…

    32 Review(s)
    $137.99
  3. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    Make perfect mortise and tenon joints with ease every time! All you need is your favorite plunge router and the new E-Z Pro Mortise and Tenon Jig! This unique jig sets up quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in…

    6 Review(s)
    $159.99
  4. Freud® 99-269 Entry Door Cove Bead Style Router Bit Set - 1/2" Shank

    Freud® 99-269 Entry Door Cove Bead Style Router Bit Set - 1/2" Shank

    This bit system is designed to build doors with true mortise and tenon structure that will last a lifetime. Matched cove and bead style bits come fully assembled, so you can get to work making beautiful rail and stile joints. Mill a tenon of any length simply by unscrewing the top cutter and bearing…

    1 Review(s)
    $199.97
  5. Leigh Square Tenon Guides

    Leigh Square Tenon Guides

    Rout tenons with square corners easily and quickly with your Leigh FMT - the perfect solution for traditional exposed tenon joinery. This kit includes all four square tenon sizes: 1/4", 5/16", 3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All…

    $72.49
  6. Leigh Louver Door Guides

    Leigh Louver Door Guides

    …can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.

    $51.99
  7. 1X Miller Dowel System with Clamp-It® and 2 Mini Clamps

    1X Miller Dowel System with Clamp-It® and 2 Mini Clamps

    …methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design. * In this method, pieces…

    7 Review(s)
    $64.66
  8. Beadlock® Tenon Stock

    Beadlock® Tenon Stock

    This unique tenon stock is specially designed for our Beadlock® Loose Tenon Joinery System. The Beadlock® joinery system allows you to create joints with mortise and tenon strength without the need for large, expensive machinery. The flutes on the stock increase the amount of precious glue…

    6 Review(s)
    From: $7.99
  9. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …remarkably easy to set up perfectly aligned multiple mortises and tenons on the FMT. Precision and repeatability are made possible by adjustable table limit stops that control the table's range of motion in both X and Y axes.* With each mortise or tenon position sighted and limit stops set, you're…

    8 Review(s)
    $1,049.00
  10. Router Joinery DVD

    Router Joinery DVD

    Routers can be used to cut a wide variety of joints quickly and accurately. In this video, professional woodworker Gary Rogowski demonstrates router joinery techniques that can be mastered by any woodworker.* You'll see firsthand how to do the work, the tools, the techniques, and the subtle rhythm…

    1 Review(s)
    $20.99
  11. Woodworking with the Router Book

    Woodworking with the Router Book

    Completely revised and updated, this is the most highly regarded and best-selling router manual available! Hundreds of large, clear photos and drawings - now in full color - show you everything you need to know about using a router productively and safely. Packed with the techniques and tricks…

    3 Review(s)
    $24.95
  12. The Joinery Challenge DVD with Ron Herman

    The Joinery Challenge DVD with Ron Herman

    The Joinery Challenge DVD with Ron HermanMaster the right way to create nine essential joints with "The Joinery Challenge" DVD hosted by Ron Herman! Ron shares over 30 years of woodworking knowledge to help you perfect the: mitered butt joint, pinned mitered butt joint, corner slip, corner half-lap,…

    0 Review(s)
    $26.29
  13. iGaging Ebony Marking/Mortise Gauge

    iGaging Ebony Marking/Mortise Gauge

    …cut those mortises, the fine lines laid out by this gauge will guarantee precise results. One side of the beam has two pins for use as a mortise gauge when laying out the outlines of mortises and tenons, while the other side has a single pin for laying out the shoulders of tenons and other joinery…

    2 Review(s)
    $44.99
  14. 3-Piece Countersink Bit Set for Log Tenon Cutters

    3-Piece Countersink Bit Set for Log Tenon Cutters

    Use in log furniture construction to cut a precise 60° taper on the mortise-a perfect match when used in conjunction with the 60° tenon cutter-for a strong, beautiful joint. Drill a 1", 1-1/2", or 2" diameter hole with a forstner bit, then use this countersink bit (with the appropriate guide…

    1 Review(s)
    $169.00
  15. Digital Wheel Marking Gauge

    Digital Wheel Marking Gauge

    Whether you're marking for tenons, mortises or dovetails, this Digital Wheel Marking Gauge will help you dial in your settings fast. With accuracy to 1/1000th of an inch, you can easily change settings, then quickly return to a previous setting with perfect repeatability. The beveled wheel helps to…

    $39.99
  16. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The Dowelmax Jr. device consists of the core components of the world famous Dowelmax Classic and is the best system on the market for…

    1 Review(s)
    $99.00
  17. Mortise Chisel Bit 3/8"

    Mortise Chisel Bit 3/8"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 3/8 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $28.69
  18. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Save money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can…

    1 Review(s)
    $51.99
  19. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …the cutter from the mortise. 5. On a flat surface, place the setter guide over the ring with the sharp edges up. Fit tenon into guide and tap with mallet just enough to start the ring into the end of the tenon. Now you can proceed with installing the tenon into the mortise. Either clamp the joint…

    2 Review(s)
    $25.49
  20. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …FMT guides and bits allow you to create any size mortise and tenon from a tiny 1/16" x 1/8" to a massive1/2" x 5". Includes five 5/16" joint guides (5/16" by 1/2", 3/4", 1", 1-1/4" and 1-1/2"), that can make over 21 sizes of mortises and tenons. Additional features:* Universal sub-base that attaches…

    3 Review(s)
    $529.00
  21. Rockler 3/8'' Beadlock® Basic Starter Kit

    Rockler 3/8'' Beadlock® Basic Starter Kit

    …loose tenon.* Ribbed tenon design prevents racking and increases the amount of precious face-grain glue surface. The result is an extremely strong, totally concealed joint. Included shim set allows you to mortise a variety of stock thicknesses, as well as to offset your mortises.* Mortises in curved…

    30 Review(s)
    $29.99
  22. Mortise Chisel Bit 1/4"

    Mortise Chisel Bit 1/4"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/4" mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $34.49
  23. Woodworker's Guide to Joinery, Book

    Woodworker's Guide to Joinery, Book

    …its joints. This book, part of the Back to Basics series, gives clear, detailed instructions on joinery fundamentals: miter, lap and groove, mortise and tenon, dovetail joints and more. Hundreds of full - color photographs and illustrations guide you through. Whether using hand tools or power tools,…

    $19.95
  24. Country Sheraton Dining Table Base Kits-71-1/2"L Dining Table Base Kit

    Country Sheraton Dining Table Base Kits-71-1/2"L Dining Table Base Kit

    …for the desired grain pattern, and to match your finish with existing furniture. Rugged mortise and tenon joinery ensures a lifetime of faithful service. Includes four 2-3/4" turned and mortised legs, four tenoned aprons with bead detail, top mounting screws and instructions. All table bases are 29"…

    From: $359.99
  • Items 1 - 24 of 79
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X