Mortise And Tenon Jig

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …allow you to precisely align the jig with your reference marks.* Index lines on the ends of jig, allow you to line up mortise width-wise on the piece.* Handles stock thicknesses of 3/4" and up.* Includes all necessary hardware for cutting 3/8" joints. (Tenon stock sold separately.)* Storage case…

    32 Review(s)
    $137.99
  2. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …E-Z Pro Mortise and Tenon Jig! This unique jig sets up quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in every joint. Set the center wall for your stock's thickness, align it with the jig, and set the mortise and tenon

    6 Review(s)
    $159.99
  3. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …one jig setup. Make perfect joints for everything from match-stick frames and miniature tables (rout joints smaller than 1/4" - so tiny they're almost beyond belief!) to full-size chairs and 6-foot garden gates.* It's remarkably easy to set up perfectly aligned multiple mortises and tenons on the…

    8 Review(s)
    $1049.00
  4. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router bits.

    $383.99
  5. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …FMT guides and bits allow you to create any size mortise and tenon from a tiny 1/16" x 1/8" to a massive1/2" x 5". Includes five 5/16" joint guides (5/16" by 1/2", 3/4", 1", 1-1/4" and 1-1/2"), that can make over 21 sizes of mortises and tenons. Additional features:* Universal sub-base that attaches…

    3 Review(s)
    $529.00
  6. 3/8'' Beadlock® Basic Starter Kit

    3/8'' Beadlock® Basic Starter Kit

    …loose tenon.* Ribbed tenon design prevents racking and increases the amount of precious face-grain glue surface. The result is an extremely strong, totally concealed joint. Included shim set allows you to mortise a variety of stock thicknesses, as well as to offset your mortises.* Mortises in curved…

    29 Review(s)
    $29.99
  7. Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    mortise that is precisely sized to accept a DOMINO loose tenon, creating an incredibly strong joint in stock as narrow as 7/8" wide! A universal joinery system with endless applications, the DOMINO is far stronger and more versatile than biscuits or dowels, and requires no cumbersome jigs and…

    1 Review(s)
    $925.00
  8. Dowelmax Classic Doweling Jig

    Dowelmax Classic Doweling Jig

    …joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The system creates quick, easy accurate and strong joints using 3/8" dowels in virtually any configuration that can be flush, offset,…

    2 Review(s)
    $249.00
  9. Leigh Super FMT Accessory Kit

    Leigh Super FMT Accessory Kit

    Bring the versatility of over 70 mortise and tenon size settings to your Leigh Super FMT Jig. Kit includes a Vacuum Box, two hose adaptors and three carbide bits; 1/4", 3/8" and 1/2". Also includes eight 1/4" guides, four 3/8" guides and four 1/2" guides.

    $289.00
  10. Beds Book

    Beds Book

    …include: Clear step-by-step instructions to build Cut lists that make it easy to get each bed started Exploded and measured drawings that A chapter on general construction show every detail strategies for building any bed design A wide range of jigs for mortising, tenoning, and other common tasks

    $24.95
  11. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …positions quickly and easily on your Domino without tools or measuring! A steel coupling cable keeps both stops always centered around the Domino mortise location. Infinitely adjustable from 3/4" to 5-1/4". Machined from aviation grade billet aluminum, with a hard anodized finish for protection.…

    $129.00
  12. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    Cut rows of perfectly fitted mortise and tenon joints! Leigh's M2, Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple…

    $268.99
  13. Leigh Louver Spiral Upcut Bit

    Leigh Louver Spiral Upcut Bit

    1/4" high-speed steel (HSS) spiral upcut bit for use with the Leigh Louver Door Guide Set (33649, sold separately) on the Leigh FMT Frame Mortise and Tenon Jigs (sold separately). The 1/4" Louver bit has a 1/2" shank to stand up to the added forces of cross-grain routing. 3/4" cutter depth.

    $20.99
  14. Woodworking with the Router Book

    Woodworking with the Router Book

    …frames, and raise panels* Cut strong, practical joints of all kinds - dadoes, rabbets, laps and half-laps, dovetails and sliding dovetails, mortise-and-tenon* Make simple, accurate jigs and fixtures* Design, make and use templates to cut joints and shape parts* Design, build and use a router table

    3 Review(s)
    $24.95
  15. 1/4" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/4" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/4" Accessory Kit to the 3/8" Beadlock® Basic Starter Kit includes corresponding guide block, HSS drill bit and shim set.

    $17.99
  16. Kreg DVD: The Pocket Hole Solution to Trim Carpentry

    Kreg DVD: The Pocket Hole Solution to Trim Carpentry

    …joinery technique that uses a special Pocket Hole Jig, step drill bit, and self-tapping screws to produce strong, tight-fitting wood joints in a fraction of the time of more traditional methods such as doweling, biscuiting, and mortise and tenons. Gary Striegler, a second generation homebuilder with…

    1 Review(s)
    $10.49
  17. 1X Miller Dowel System with  Clamp-it and 2 Mini Clamps

    1X Miller Dowel System with Clamp-it and 2 Mini Clamps

    …methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design. * In this method, pieces…

    7 Review(s)
    $64.66 $45.99

    SAVE 29%

  18. The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    …Butt Joints* Adding Biscuits and Splines* Gluing and Clamping Procedures* Measuring Tools and How They Work* Mortise and Tenon Joints* Hand-Cut Joints: Dovetail* Machine-Cut Joints* Jigs and Assembly Aids* Tapering and Carving* Making Drawers* Hardware Options* How a Plane Works* Table Saw Safety*…

    $19.99
  19. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The Dowelmax Jr. device consists of the core components of the world famous Dowelmax Classic and is the best system on the market for…

    1 Review(s)
    $99.00
  20. Leigh Louver Door Guides

    Leigh Louver Door Guides

    …can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.

    $51.99
  21. Vacuum Box kit for the Super FMT

    Vacuum Box kit for the Super FMT

    Control debris for cleaner operation of your Leigh Super FMT Jig. Kit contains the Vacuum Box and two hose adapters for hoses from 1" to 2-1/2" in diameter.

    $49.00
  22. Leigh ACMTC Accessory Kit

    Leigh ACMTC Accessory Kit

    …Leigh FMT Mortise and Tenon Jig with this value-priced bundle! It includes a boxed-set of all the standard bits for the FMT-eight solid carbide bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise and tenon joints. This…

    1 Review(s)
    $379.00
  23. 1x Miller Quick Drill Kit - Each

    1x Miller Quick Drill Kit - Each

    …methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.* In this method, pieces…

    7 Review(s)
    $35.69
  24. Leigh Joint Guides for the FMT

    Leigh Joint Guides for the FMT

    Rout a huge variety of mortise and tenon joints with this selection of joint guides and your FMT Mortise and Tenon Jig.* The 1/4" FMT guide set (31536) includes 8 guides and 1 stand (Leigh item #6704). It can machine mortises and tenons 1/4" thick, ranging from 1/4" to 2-3/8" wide.* The 3/8" FMT…

    From: $39.49
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X