Mortise Jig

  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
  1. Soss Routing Jig-Select Size

    Soss Routing Jig-Select Size

    Use this jig for laying out the mortise for the Soss hinge. Makes installation of Soss hinges easy and accurate, eliminating all guesswork. Use with coordinating Soss hinge.

    3 Review(s)
    $37.99
  2. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …E-Z Pro Mortise and Tenon Jig! This unique jig sets up quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in every joint. Set the center wall for your stock's thickness, align it with the jig, and set the mortise and tenon…

    6 Review(s)
    $159.99
  3. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …smooth-sided mortises. Just pop the included paring block into the jig to provide an accurate guide for your chisel. With a 3-1/2" width capacity, it will easily handle the large joints found in tables, chairs and big casework. Slide the guide block along the rails to place your mortise precisely…

    32 Review(s)
    $137.99
  4. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …Super FMT guides and bits allow you to create any size mortise and tenon from a tiny 1/16" x 1/8" to a massive1/2" x 5". Includes five 5/16" joint guides (5/16" by 1/2", 3/4", 1", 1-1/4" and 1-1/2"), that can make over 21 sizes of mortises and tenons. Additional features:* Universal sub-base that…

    3 Review(s)
    $529.00
  5. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …perfect joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The Dowelmax Jr. device consists of the core components of the world famous Dowelmax Classic and is the best system on the…

    1 Review(s)
    $99.00
  6. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  7. 3/8'' Beadlock® Basic Starter Kit

    3/8'' Beadlock® Basic Starter Kit

    …glue surface. The result is an extremely strong, totally concealed joint. Included shim set allows you to mortise a variety of stock thicknesses, as well as to offset your mortises.* Mortises in curved and tapered parts are simple.* For narrow material, rip the tenon stock down to fewer "beads."*…

    29 Review(s)
    $29.99
  8. Leigh Louver Door Guides

    Leigh Louver Door Guides

    …can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.

    $51.99
  9. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …is highly adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the included bearing-guided router bit. Designed…

    $37.99
  10. Dowelmax Classic Doweling Jig

    Dowelmax Classic Doweling Jig

    …perfect joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The system creates quick, easy accurate and strong joints using 3/8" dowels in virtually any configuration that can be flush,…

    2 Review(s)
    $249.00
  11. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router bits.

    $383.99
  12. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x…

    $29.99
  13. Beds Book

    Beds Book

    …include: Clear step-by-step instructions to build Cut lists that make it easy to get each bed started Exploded and measured drawings that A chapter on general construction show every detail strategies for building any bed design A wide range of jigs for mortising, tenoning, and other common tasks

    $24.95
  14. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …bit and one jig setup. Make perfect joints for everything from match-stick frames and miniature tables (rout joints smaller than 1/4" - so tiny they're almost beyond belief!) to full-size chairs and 6-foot garden gates.* It's remarkably easy to set up perfectly aligned multiple mortises and tenons…

    8 Review(s)
    $1049.00
  15. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …positions quickly and easily on your Domino without tools or measuring! A steel coupling cable keeps both stops always centered around the Domino mortise location. Infinitely adjustable from 3/4" to 5-1/4". Machined from aviation grade billet aluminum, with a hard anodized finish for protection.…

    $129.00
  16. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …clamp guide, and reduces clamp guide set up time.* Adjustable Mortising: Install the included mortising pins to cut "centered and off centered" mortises. Microadjust wheel allows you to precisely control the actual width of the mortise.* Ant-Tilt Support: Traditionally, most of the router base…

    6 Review(s)
    $79.99
  17. Full Mortise Chest Lock

    Full Mortise Chest Lock

    Brass plated lock requires 2" L x 1-1/2" D x 5/16" mortise. Selvedge is 3/8" x 3-1/8" . Escutcheon provided. Jig It insert available for creating the mortise with our Jig It Mortising System.

    10 Review(s)
    $13.99
  18. 1X Miller Dowel System with  Clamp-it and 2 Mini Clamps

    1X Miller Dowel System with Clamp-it and 2 Mini Clamps

    …consuming methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design. * In this method,…

    7 Review(s)
    $64.66 $45.99

    SAVE 29%

  19. Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    …no cumbersome jigs and fixtures. Features precise Festool engineering from tip to tail. Four cutter sizes machine snug mortises for five different DOMINO sizes. Self-referencing pins allow you to cut rows of perfectly spaced mortises with no need to measure and mark. Mortise width is adjustable…

    1 Review(s)
    $925.00
  20. Kreg DVD: The Pocket Hole Solution to Trim Carpentry

    Kreg DVD: The Pocket Hole Solution to Trim Carpentry

    …new joinery technique that uses a special Pocket Hole Jig, step drill bit, and self-tapping screws to produce strong, tight-fitting wood joints in a fraction of the time of more traditional methods such as doweling, biscuiting, and mortise and tenons. Gary Striegler, a second generation homebuilder…

    1 Review(s)
    $10.49
  21. Woodworker's Journal Home Projects CD

    Woodworker's Journal Home Projects CD

    …Bookends* Weekend Toy Box* Hall Mirror for Beginners* Veneered Checkerboard* Classic Canister set* Arts & Crafts Style Side Table* Router Mortising Jig* Adjustable Shop Horse* Bathroom Vanity* Classic Kitchen Island* Shop-Built Passage Door* Fireplace Mantel* Build a Bedroom Shelf* Cabinet Shell…

    $13.69
  22. 1/2" Beadlock® Pro Accessory Kit

    1/2" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $47.99
  23. Concealed Soss Hinges-Black Finish

    Concealed Soss Hinges-Black Finish

    …measure 3/8" W x 1- 11/16" L. (Minimum wood thickness: 1/2" ).* Wings on #26526 measure 1/2" W x 2-3/8" L. (Minimum wood thickness: 3/4" ).* Wings on #26287 measure 1" W x 4- 5/8" . (minimum wood thickness: 1- 3/8" ). Best Used With: Soss Routing Jig, designed to ensure accurate hinge mortises.

    9 Review(s)
    From: $38.99
  24. 1x Miller Walnut Dowels, 40 Pack

    1x Miller Walnut Dowels, 40 Pack

    …consuming methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.* In this method,…

    $15.79
  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X