Mortise Machine

  • Items 1 - 24 of 50
  • Page:
    1. 1
    2. 2
    3. 3
  1. Jet® Benchtop Mortising Machine

    Jet® Benchtop Mortising Machine

    mortising handle let you reposition the feed handle for easier operation and optimum handle position* Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks* Two hinged side doors allow easy access to the drill chuck* Quick adjust depth stop for uniform mortise

    2 Review(s)
    $354.99
  2. Powermatic® Benchtop Deluxe Mortiser

    Powermatic® Benchtop Deluxe Mortiser

    The new POWERMATIC® PM701 Benchtop Mortiser features an in-line depth stop which allows the user to stop at preset depths without racking the mortiser bit to the base. Its heavy-duty reversible handle is so versatile that it can be changed from one side to the other quickly and easily and…

    1 Review(s)
    $489.99
  3. Dowelmax Classic Doweling Jig

    Dowelmax Classic Doweling Jig

    …perfect joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The system creates quick, easy accurate and strong joints using 3/8" dowels in virtually any configuration that can be flush,…

    2 Review(s)
    $249.00
  4. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …Table and fence tilt from 0 to 35° for angled mortises * Gas cylinder controlled rack and pinion system for smooth head raising and lowering * Hinged chuck door allows easy access for quick bit changes * Quick adjust depth stop for uniform mortise depths * Provided 5/8", 3/4" and 1-1/8" bushings…

    1 Review(s)
    $1,274.99
  5. 3/8'' Stanley Sweetheart Socket Chisel

    3/8'' Stanley Sweetheart Socket Chisel

    …than tang chisels, but the socket design makes it very easy to replace the stock handle with one you've turned for a custom, comfortable grip. Machined in Sheffield, England, from high carbon chrome steel for easy sharpening and razor-sharp edge retention over long periods of use. Side bevels are…

    $33.99
  6. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    …bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a…

    1 Review(s)
    $51.99
  7. Mortise Chisel Bit 3/8"

    Mortise Chisel Bit 3/8"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 3/8 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $28.69
  8. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …your Domino without tools or measuring! A steel coupling cable keeps both stops always centered around the Domino mortise location. Infinitely adjustable from 3/4" to 5-1/4". Machined from aviation grade billet aluminum, with a hard anodized finish for protection. Detent positions for the stop arm's…

    $129.00
  9. Mortise Chisel Bit 1/2"

    Mortise Chisel Bit 1/2"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/2 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $27.59
  10. 1/2'' Stanley Sweetheart Socket Chisel

    1/2'' Stanley Sweetheart Socket Chisel

    …than tang chisels, but the socket design makes it very easy to replace the stock handle with one you've turned for a custom, comfortable grip. Machined in Sheffield, England, from high carbon chrome steel for easy sharpening and razor-sharp edge retention over long periods of use. Side bevels are…

    $34.99
  11. Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    …sizes machine snug mortises for five different DOMINO sizes. Self-referencing pins allow you to cut rows of perfectly spaced mortises with no need to measure and mark. Mortise width is adjustable in three increments with the simple turn of a knob, and cuts can be overlapped for long mortises. Fence…

    1 Review(s)
    $925.00
  12. The Way to Woodwork DVD Series from Woodworker's Journal

    The Way to Woodwork DVD Series from Woodworker's Journal

    …Introduction & Preparing Stock* Chapter 2: Marking & Cutting Mortise & Tenons* Chapter 3: Ash Table: Shaping Parts & Angled Shoulders* Chapter 4: Ash Table: Glue up & Finish* Chapter 5: Bookcase: Introduction to Frame & Panel* Chapter 6: Machined Joinery Options* Chapter 7: Bookcase: Frame & Panel…

    $79.99
  13. Drill Press Tool Collector

    Drill Press Tool Collector

    Keeps tools organized and right on hand! No more searching through the tool box for the bit you need- it's clearly visible with the tool collector! Plastic. 11" diameter. Swings out of the way when not in use. (Also a great place to keep that cup of coffee!)

    13 Review(s)
    $15.49
  14. Mortise Chisel Handle

    Mortise Chisel Handle

    …Forstner bit. Then clean-up the mortise using this 6-1/2" solid Ash handle and any mortising chisel with a 5/8" shank. Cuts clean, precise mortises where mortising machines can't access or when you just have a few to do and don't want to set up your mortise machine. Chisels shown not included.…

    1 Review(s)
    $14.49
  15. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …clamp guide, and reduces clamp guide set up time.* Adjustable Mortising: Install the included mortising pins to cut "centered and off centered" mortises. Microadjust wheel allows you to precisely control the actual width of the mortise.* Ant-Tilt Support: Traditionally, most of the router base…

    7 Review(s)
    $79.99
  16. 5/8'' Stanley Sweetheart Socket Chisel

    5/8'' Stanley Sweetheart Socket Chisel

    …than tang chisels, but the socket design makes it very easy to replace the stock handle with one you've turned for a custom, comfortable grip. Machined in Sheffield, England, from high carbon chrome steel for easy sharpening and razor-sharp edge retention over long periods of use. Side bevels are…

    $35.99
  17. Belwith Surface Mount and Mortise Hinge, Self-Closing, 3/8'' Offset, P9295

    Belwith Surface Mount and Mortise Hinge, Self-Closing, 3/8'' Offset, P9295

    * Finish: Polished Brass* Base Material: Solid Brass* Machine Screw Thread Size: #8-32* Screws are included* Warranty: Lifetime

    $14.99
  18. 1/8'' Stanley Sweetheart Socket Chisel

    1/8'' Stanley Sweetheart Socket Chisel

    …than tang chisels, but the socket design makes it very easy to replace the stock handle with one you've turned for a custom, comfortable grip. Machined in Sheffield, England, from high carbon chrome steel for easy sharpening and razor-sharp edge retention over long periods of use. Side bevels are…

    $31.99
  19. Stanley® Sweetheart™ 4-Pc. Socket Chisel Set

    Stanley® Sweetheart™ 4-Pc. Socket Chisel Set

    …tang chisels, but the socket design makes it very easy to replace the stock handle with one you've turned for a custom, comfortable grip. Each was machined in Sheffield, England from high carbon chrome steel for easy sharpening and razor-sharp edge retention over long periods of use. Side bevels are…

    $119.99
  20. Belwith Self Mortise Hinge, P8294-AB

    Belwith Self Mortise Hinge, P8294-AB

    * Finish: Antique Brass* Base Material: Steel* Length: 2"* Width: 1-7/16"* Machine Screw Thread Size: #8-32* Screws are included* Warranty: Lifetime

    $4.07
  21. The New Complete Guide to the Bandsaw Book

    The New Complete Guide to the Bandsaw Book

    …typical usage for fair curves, straight cuts, scrollwork, ripping and resawing, all the way to mortise and tenon and dovetail joinery, you'll be amazed at how much you can get from one simple machine. Also includes sections on saw choice, blade choice, sharpening, tune-up and more! Full-color…

    1 Review(s)
    $19.95
  22. Stanley® Sweetheart™ 8-Pc. Socket Chisel Set

    Stanley® Sweetheart™ 8-Pc. Socket Chisel Set

    …tang chisels, but the socket design makes it very easy to replace the stock handle with one you've turned for a custom, comfortable grip. Each was machined in Sheffield, England from high carbon chrome steel for easy sharpening and razor-sharp edge retention over long periods of use. Side bevels are…

    $229.99
  23. Belwith Self Mortise Hinge, P8294-LP

    Belwith Self Mortise Hinge, P8294-LP

    * Finish: Lancaster Hand Polished* Base Material: Steel* Length: 2"* Width: 1-7/16"* Machine Screw Thread Size: #8-32* Screws are included* Warranty: Lifetime

    $4.07
  24. Belwith Self Mortise Hinge, P8293-LP

    Belwith Self Mortise Hinge, P8293-LP

    * Finish: Lancaster Hand Polished* Base Material: Steel* Length: 2-1/2"* Width: 1-1/2"* Machine Screw Thread Size: #8-32* Screws are included* Warranty: Lifetime

    $4.55
  • Items 1 - 24 of 50
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X