Mortise Template

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …bushings also allow you to follow the template without error. Technical Details:* Consistently cut perfect mortise and tenon joints using the same setup * Sets up quickly on the ends of both pieces of stock* Thumb-screw adjustments for mounting* Sliding templates adjust for the length of the joint*…

    6 Review(s)
    $159.99
  2. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …reversible template to produce round and square end tenons.* For 1/2"-2" thick material; maximum width 4".* Angle bar and main plate can be rotated from -10° to 45°.* Template can also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise

    $383.99
  3. Soss Routing Jig-Select Size

    Soss Routing Jig-Select Size

    Use this jig for laying out the mortise for the Soss hinge. Makes installation of Soss hinges easy and accurate, eliminating all guesswork. Use with coordinating Soss hinge.

    3 Review(s)
    $37.99
  4. Leigh Square Tenon Guides

    Leigh Square Tenon Guides

    …joinery. This kit includes all four square tenon sizes: 1/4", 5/16", 3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All square tenons are routed with a 1/2" router bit. Note: New FMT guides not exactly as shown. Technical Details:* Includes 1/4",…

    $72.49
  5. 3" Non-Mortise Butt Hinges (Various Finishes)

    3" Non-Mortise Butt Hinges (Various Finishes)

    …all of our Shutter Jig Templates and select the style that is perfect for your application! Details:* The 3" No-Mortise Butt Hinges make ideal shutter hinges, but are also well-suited for kitchen cabinet doors.* Interlocking hinge leaves eliminate the need to cut hinge mortises.* 1/4" hinge barrel.*…

    1 Review(s)
    $6.29
  6. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …door hinge routing template is highly adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the included bearing-guided…

    $37.99
  7. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Upward spiral is perfect for ejecting chips from mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide…

    1 Review(s)
    From: $51.47
  8. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud's bearing-guided mortising bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic…

    0 Review(s)
    From: $22.47
  9. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  10. 3" Non-Mortise Wrap Hinges (Various Finishes)

    3" Non-Mortise Wrap Hinges (Various Finishes)

    …hinges for your thick, custom window shutters – but they're also well-suited for kitchen cabinet doors. The design eliminates the need for mortises, and the hinges feature a removable pin, making it easy to remove your shutters or doors for cleaning or refinishing. The removable pin also…

    $6.29
  11. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …TablePart Three - Router Jigs and Techniques * Handheld Routing* Essential Jigs for the Router Table * Five Smart Router Jigs * Versatile Mortising Jig * Templates Guide the Way* A Guide to Guide Bushings* Climb Cutting: Don't Believe the Naysayers* Eight Tips for Flawless Moldings * Taper Your…

    $21.95
  12. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    Upward spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up…

    From: $20.47
  13. Wrap-Around Shutter Hinges

    Wrap-Around Shutter Hinges

    …Standard swaging. Fits shutter panel thicknesses of 1" to 1-1/6". Measures approx. 2-1/2" x 2". Priced per pair. Matching mounting screws included. Ready to build your own custom shutters with ease? View all of our Shutter Jig Templates and select the style that is perfect for your application!

    1 Review(s)
    $6.29
  14. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $2.99

    SAVE 70%

  15. Mouse Hole Jig-It® for Movable Louvered Shutters

    Mouse Hole Jig-It® for Movable Louvered Shutters

    …hole" into the top rail of your hand-made shutters. The mouse hole is a small open-ended mortise that the shutter control arm swings into when the louvers are closed. Simple to use with a standard 1-3/8" template guide, just clamp and rout. The sturdy transparent jig makes it easy to line up with…

    1 Review(s)
    $14.99
  16. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …threaded template guides. #22142 Round Sub base accepts the Bosch RA-Series Template Guides. #37072 (RA1100) Template Guide Adapter for threaded templates allows use of conventional threaded template guides with the #22142 (PR009) round sub base. Allows you to use Porter-Cable template guides in…

    23 Review(s)
    $129.99
  17. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    …ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting. Carbide-tipped. Shank…

    5 Review(s)
    $18.99
  18. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …clamp guide, and reduces clamp guide set up time.* Adjustable Mortising: Install the included mortising pins to cut "centered and off centered" mortises. Microadjust wheel allows you to precisely control the actual width of the mortise.* Ant-Tilt Support: Traditionally, most of the router base…

    7 Review(s)
    $79.99
  19. The New Complete Guide to the Bandsaw Book

    The New Complete Guide to the Bandsaw Book

    …renowned band saw expert Mark Duginske. From its typical usage for fair curves, straight cuts, scrollwork, ripping and resawing, all the way to mortise and tenon and dovetail joinery, you'll be amazed at how much you can get from one simple machine. Also includes sections on saw choice, blade…

    1 Review(s)
    $19.95
  20. Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    …depth-rod with micro-rod for fine adjustments. Powerful 1-1/4 hp motor is perfect for trimming laminate, cutting flutes, edge profiling and even mortising. All-metal motor can is designed for durability, and motor features soft-start and electronic speed control to maintain speed under load.…

    $189.00
  21. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes…

    $159.97
  22. Mini Concealed Soss Hinge

    Mini Concealed Soss Hinge

    …concealed hinge. When anchored in the specialized Soss hinge mortise, they offer both strength and a refined look. Technical Details:* Hinges are 3/8" wide x 1" long* Requires a mortise* For use in material at least 1/2" thick* Includes instructions and paper installation template* Price per pair

    4 Review(s)
    $23.99
  23. The Versatile Router, Fine Woodworking DVD

    The Versatile Router, Fine Woodworking DVD

    …to get much more from your router than basic operations. See how to use the router as a finishing tool and to use bearing and guided bits with templates to perfectly reproduce shapes.* You'll see firsthand how to do the work, the tools, the techniques, and the subtle rhythm of each process.* 48…

    $19.95
  24. Woodworking with the Router Book

    Woodworking with the Router Book

    …frames, and raise panels* Cut strong, practical joints of all kinds - dadoes, rabbets, laps and half-laps, dovetails and sliding dovetails, mortise-and-tenon* Make simple, accurate jigs and fixtures* Design, make and use templates to cut joints and shape parts* Design, build and use a router table

    3 Review(s)
    $24.95
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X