Mortising Bit

  • Items 1 - 24 of 91
  • Page:
    1. 1
    2. 2
    3. 3
  1. Mortise Chisel Bit 1/2"

    Mortise Chisel Bit 1/2"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/2 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $27.59
  2. Freud Mortising Bits

    Freud Mortising Bits

    …shear angle of the cutters on these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep center…

    2 Review(s)
    From: $18.47
  3. Freud Top Bearing Mortising Dado Router Bits

    Freud Top Bearing Mortising Dado Router Bits

    Freud's bearing-guided mortising bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic…

    From: $22.47
  4. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …chips from mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective…

    1 Review(s)
    From: $51.47
  5. Up-Cut Spiral Mortising Router Bits

    Up-Cut Spiral Mortising Router Bits

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  6. Mortise Chisel Bit 1/4"

    Mortise Chisel Bit 1/4"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/4" mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $34.49
  7. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    …ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip…

    From: $20.47
  8. 4-Piece Straight Bit Set - 1/4" Shank

    4-Piece Straight Bit Set - 1/4" Shank

    …straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.

    $54.99
  9. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  10. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  11. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    …drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x 3/4" and 1/2" x 1". Additional sizes can be routed using table limit stops and different bit sizes. Note:…

    $29.99
  12. Powermatic® Benchtop Deluxe Mortiser

    Powermatic® Benchtop Deluxe Mortiser

    …Benchtop Mortiser features an integrated bit and chisel spacer system. These two spacers are used to accurately and quickly account for the space needed between the bit and chisel during set-up. Large work surfaces in the table and fence allow for more stability and accurate cuts. The new mortiser

    1 Review(s)
    $489.99
  13. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router bits.

    $383.99
  14. Drill Press Tool Collector

    Drill Press Tool Collector

    Keeps tools organized and right on hand! No more searching through the tool box for the bit you need- it's clearly visible with the tool collector! Plastic. 11" diameter. Swings out of the way when not in use. (Also a great place to keep that cup of coffee!)

    13 Review(s)
    $15.49
  15. Leigh ACMTC Accessory Kit

    Leigh ACMTC Accessory Kit

    …your Leigh FMT Mortise and Tenon Jig with this value-priced bundle! It includes a boxed-set of all the standard bits for the FMT-eight solid carbide bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise and tenon joints.…

    1 Review(s)
    $379.00
  16. Mortise Chisel Bit 3/8"

    Mortise Chisel Bit 3/8"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 3/8 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $28.69
  17. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes…

    $159.97
  18. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …Pro Jig, 3/8" drill bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For…

    32 Review(s)
    $137.99
  19. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the included bearing-guided router bit. Designed to be used on the door…

    $37.99
  20. Leigh Square Tenon Guides

    Leigh Square Tenon Guides

    …3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All square tenons are routed with a 1/2" router bit. Note: New FMT guides not exactly as shown. Technical Details:* Includes 1/4", 5/16", 3/8" and 1/2" square tenon sizes.* Routed with a 1/2" bit.

    $72.49
  21. Jet® Benchtop Mortising Machine

    Jet® Benchtop Mortising Machine

    mortising handle let you reposition the feed handle for easier operation and optimum handle position* Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks* Two hinged side doors allow easy access to the drill chuck* Quick adjust depth stop for uniform mortise

    2 Review(s)
    $354.99
  22. 3-Piece Mortise Chisel Sharpening Set

    3-Piece Mortise Chisel Sharpening Set

    Keep hollow mortising chisel edges sharp for fast and efficient cutting!* Diamond-coated abrasives hone the hardest steel, including carbide.* Cone shape puts the final edge on inside bevels.* Sharpens mortising chisels up to 1/2" size.* Set includes handle, 1/4" quick-change chuck, 2 diamond cones…

    20 Review(s)
    $49.49
  23. 3/8'' Beadlock® Basic Starter Kit

    3/8'' Beadlock® Basic Starter Kit

    …as well as to offset your mortises.* Mortises in curved and tapered parts are simple.* For narrow material, rip the tenon stock down to fewer "beads."* It's also ideal for reinforcing glass panel cabinet doors.* Includes four .060" shims, two .030" shims, 3/8" HSS Drill Bit and a molded plastic case…

    29 Review(s)
    $29.99
  24. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …Table and fence tilt from 0 to 35° for angled mortises * Gas cylinder controlled rack and pinion system for smooth head raising and lowering * Hinged chuck door allows easy access for quick bit changes * Quick adjust depth stop for uniform mortise depths * Provided 5/8", 3/4" and 1-1/8" bushings…

    1 Review(s)
    $1274.99
  • Items 1 - 24 of 91
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X