Nova Lathe

  • Items 1 - 24 of 64
  • Page:
    1. 1
    2. 2
    3. 3
  1. Nova Comet II 12'' x 16-1/2'' Midi Lathe

    Nova Comet II 12'' x 16-1/2'' Midi Lathe

    …use your Nova Comet II as a grinding wheel, wire brush, sanding disc, belt sander or wet stone.* Quality materials - solid cast iron throughout.* Rugged 2MT spindles.* Lathe accessories are common between Nova models, so you can still use your accessories if you choose to upgrade your Nova lathe.*

    2 Review(s)
    $499.99
  2. Nova DVR XP 16'' x 24'' Lathe

    Nova DVR XP 16'' x 24'' Lathe

    Nova DVR Lathes combine the power and capacity of larger woodturning lathes with state of the art intelligent technology to make turning more efficient, fun and safe. Turn on the Nova DVR XP, and you'll be greeted with smooth, whisper-quiet operation, and rock steady turning. That's because its…

    $2399.99
  3. Nova 1624-44 16'' x 24'' Lathe

    Nova 1624-44 16'' x 24'' Lathe

    The Nova 1624 Lathe boasts the most power, versatility and features of any comparable mid-range lathe. Its swiveling headstock rotates a full 360°, and locks at any position for outboard turning of large items. The powerful 1.5 HP motor delivers 50% more power than comparable lathes, and…

    $1399.99
  4. Nova Lathe Bed Extension

    Nova Lathe Bed Extension

    …is for use with the Nova DVR XP and Nova 1624-44 lathes (45311 and 48465, sold separately). It is a solid cast iron unit that adds 20" to the spindle turning capacity of your lathe. Multiple units can be added as needed. * Each bed extension adds 20" to your lathe.* Add as many extensions…

    $209.99
  5. Nova G3 Comet II Reversible Chuck

    Nova G3 Comet II Reversible Chuck

    Nova G3 Comet II Chuck features a locking set screw that allows it to be used safely in reverse mode without the risk of unthreading. It is designed for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing lathes,

    $159.99
  6. Nova Outrigger Lathe Accessory

    Nova Outrigger Lathe Accessory

    …(the outrigger accepts the same tool rest that comes with your lathe). * Fits Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). * Handles work up to 29" (740mm) in diameter. * Space saving - does not add to lathe footprint. * Very quick and easy to swing into place, giving…

    $284.99
  7. Nova DVR 2024 20'' x 24'' Lathe

    Nova DVR 2024 20'' x 24'' Lathe

    …excellent power.* Incredible speed range, with a very low minimum of 100 RPM up to an incredibly high maximum of 5000 RPM, makes the Nova 2024 DVR Wood Lathe the perfect solution for a wide variety of projects from small pens to large bowls and platters.* Head swivels 360° and locks at any…

    $3149.99
  8. Nova Cole Jaw Set

    Nova Cole Jaw Set

    …for lathes with a minimum 8Designed for lathes with a minimum 12"/300mm swing diameter. * Designed for lathes with a minimum 12"/300mm swing diameter.* Max workpiece diameter with Precision Midi chuck: 8.661" (external grip); 11" (internal grip).* Max workpiece diameter with Nova G3 chuck:…

    $83.99
  9. Nova Swing-Away Lathe Attachment

    Nova Swing-Away Lathe Attachment

    …the Nova Swing-Away Lathe Attachment. This beefy cast iron hinge allows you to swing away your heavy tailstock along with your bed extension so you have full access to the headstock when turning bowls or hollowing out deep forms. The attachment fits the Nova 1624 and the Nova DVR XP lathes and Bed…

    $169.99
  10. Nova Cast Iron Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    Nova Cast Iron Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    …high quality cast iron, with CAD designed gussets at critical points, this stand makes a stable, rock steady base for both the Nova 1624-44 and the Nova DVR XP lathes (48465 and 45311, sold separately). Technical Details:* Solid cast iron construction.* CAD designed and tested for optimum strength.*…

    $419.99
  11. Nova SuperNova 2 Insert Chuck

    Nova SuperNova 2 Insert Chuck

    …Body made from precision machined 1045 high-tensile steel.* Able to take all Nova accessory jaws (except Titan Power grip, which is specially designed for the Titan Chuck). Features standard on all Nova chucks:* All Nova chucks are four-jaw, self centering scroll chucks for fast, secure setups.* The…

    $199.99
  12. Nova Woodsurfer  Bowl Rest

    Nova Woodsurfer Bowl Rest

    …the Nova 1624 and the Nova XP DVR lathes. It is cast from a solid section thickness with CAD generated gussets at critical points. It is capable of withstanding extremely high stresses with practically no distortion. 1" shank. The toolrest is one of the most important features on any lathe. The rest…

    $49.99
  13. Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    Nova's 25048 Hybrid Lathe Stand provides a solid, yet lightweight foundation for your Nova DVR XP Lathe (45311, sold separately). Made from a mix of solid steel and cast iron, it provides rigid strength, but is light enough for easier portability. The stand also comes standard with the Nova 1624-44…

    $304.99
  14. Nova Faceplate Rings

    Nova Faceplate Rings

    …of your faceplate ring should match the size of the jaws on your Nova chuck. * Faceplate Rings fit directly into your Teknatool Chuck (matching size of jaws must be mounted on the chuck).* No need to remove the chuck from your lathe as you would with traditional faceplate mounting.* Fast mounting…

    From: $33.50
  15. Nova Comet II Versaturn Grinding Wheel Attachment

    Nova Comet II Versaturn Grinding Wheel Attachment

    …swiveling safety shield and tool rest. * For use with the Nova Comet II Midi Lathe (46457, sold separately).* Easy to install and remove with the required Versaturn Coupler (48026, sold separately).* Variable speed adjustment on Comet II Lathe reduces tool edge burn.* 6" x 3/4" white-stone…

    $52.49
  16. Carter Hollow Roller™ Mounting Stud 0625-35

    Carter Hollow Roller™ Mounting Stud 0625-35

    …1220, Nova Mercury, Rikon Mini, and most Mini and Midi lathes with a 5/8" tool rest post. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Delta Midi, Jet Mini 1014, Jet Midi 1220, Nova Mercury, Rikon Mini, and most Mini and Midi lathes

    $26.29
  17. Nova Comet II Bed Extension

    Nova Comet II Bed Extension

    Extend the spindle turning capacity of your Nova Comet II Midi Lathe! This bed extension adds 25-1/2" in length, extending the Comet II's distance between centers to 42". You can also add multiple bed extensions for even longer turnings. Solid cast iron throughout for durability and vibration-free…

    $115.49
  18. Nova Lathe Handwheel

    Nova Lathe Handwheel

    …comes standard with all Nova DVR Lathes, and can be used on all Nova lathes except for the Nova Comet II Midi Lathe. * Compatible with all Nova lathes except for the Comet II Midi Lathe.* Used on outboard end of lathe headstock to position work by hand (lathe must be switched off).* Machined…

    $31.49
  19. Nova Tool Rest

    Nova Tool Rest

    …fit any Nova Lathe. Nova 12" (300mm) Tool Rest (TR300/1):* Ideal for larger work where you want more mobility without having to readjust.* Fits all lathes with a 1" (25mm) shank.* Ribbed design for maximum rigidity.* Solid cast iron for strength.* Fits all NOVA Lathes (excluding Nova Comet…

    From: $26.99
  20. Carter Hollow Roller™ Vessel Turning System

    Carter Hollow Roller™ Vessel Turning System

    …for all size lathes from mini's to full size* Made in USAMounting Studs Necessary for Adapting Roller System to Lathe:* 45036 - Mounting Stud Works with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool…

    1 Review(s)
    $358.99
  21. Nova 2MT Spur Center

    Nova 2MT Spur Center

    Nova lathes, and it also works well as a replacement or as an upgrade for another lathe. Its rugged four-prong profile bites into your wood blank to provide a secure grip for spindle turnings and other demanding workpieces. Precisely machined from medium-tensile carbon steel. Fits all Nova lathes,

    $21.99
  22. Nova Cole Jaw Buffers

    Nova Cole Jaw Buffers

    Nova Cole Jaw Buffers are an accessory for the Nova Cole Jaws and Nova Mini Cole Jaws (45174 and 45274, sold separately). The buffers are designed to safely and securely hold your turned edge bowls and large diameter cylinders so you can make the finishing cuts to the bottom side. The kit includes…

    $26.99
  23. Nova DVR Wireless Remote

    Nova DVR Wireless Remote

    …with any lathe other than the Nova DVR Series.* Adjust speeds, and stop and start the lathe from up to 23 feet or 7 meters away.* Wear the remote like a wristwatch, or remove the strap to attach magnetically to your Nova DVR Lathe.* Included as standard with every Nova DVR 2024 Lathe.* Large,…

    $104.99
  24. Nova Dovetail Chisel

    Nova Dovetail Chisel

    …with the dovetailed contour of your Nova Jaws, making it easy to mount bowl blanks onto your lathe. The precise fit and wedging action give the maximum holding power for your chuck. Although other chisels can be used, none have the dedicated shape of the Nova Dovetail Chisel, and they often result…

    $39.99
  • Items 1 - 24 of 64
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X