Nut Measuring

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
  1. Thread Detective Screw Gauge

    Thread Detective Screw Gauge

    nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification ofbolt size, nut diameter and thread pitch. Standard gauges are black with 14 measuring gauges. Metric gauges are red with 11 measuring

    34 Review(s)
    $17.99
  2. Round Top Protractor #19

    Round Top Protractor #19

    This durable angle gauge features a hard-chrome, half-round head with right- andleft-reading scales to 180°. Its pivoting arm moves smoothly and extends roughly sixinches from the head. Additional features:* Great for angle-reading * Ideal for scribing* Durable knurled lock-nut secures the blade…

    $15.99
  3. Rockler Wheel Marking Gauge

    Rockler Wheel Marking Gauge

    …Features a solid brass body, knurled lock nut, graduated scales and a recess to protect the cutter in storage. Additional features:* Shaft has graduated scales (1 mm and 1/8 inch increments) for easy reference* Doubles as a depth gauge* Great for quick measurement transfers* Wheel retracts into face…

    26 Review(s)
    $16.49
  4. Bolt Size-It Gauge

    Bolt Size-It Gauge

    Quickly and easily size bolts, screws, nuts and twist drills! Bolt Size-It also features ruler marked with inches and millimeters.* Gauge metric hex nuts and washers by holding under metric holes.* Resists water, alcohol, oil and grease.* Hard plastic.

    4 Review(s)
    $5.49
  5. 8'' Wing Compass

    8'' Wing Compass

    …surface. Two huge wings spread out up to 10-1/2" for a maximum circle diameter of 21", and close down completely to scribe even the smallest sliver for cabinetry installation. Solid steel. Knurled locking nut holds your setting tight, while the powder-coated finish keeps it looking sharp for years.

    5 Review(s)
    $28.99
  6. Starrett 12'' Combination Square, with Square Head

    Starrett 12'' Combination Square, with Square Head

    …has a cast iron head with a handy spirit level and a hardened scriber. The blade is machine divided, hardened and tempered with a reversible lock bolt that allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This assures true alignment of the blade and head.

    9 Review(s)
    $102.99
  7. Woodturner's Caliper Set

    Woodturner's Caliper Set

    Three-piece set is designed for reliable, accurate layout and measuring. Technical Details:* Contains inside caliper, outside caliper and divider, all in convenient 8" size.* Finely machined nuts run cleanly and quickly to secure legs exactly to dimension.* Divider legs are precision ground to fine,…

    1 Review(s)
    $54.99
  8. 129-pc Jig Hardware Kit 5/16"-18 ($150 Value)

    129-pc Jig Hardware Kit 5/16"-18 ($150 Value)

    …T-bolts (10)* 3-1/2" T-bolts (10)* 5-star insert knobs (4)* 5-star bolt knobs (4)* 2" T-knobs (6)* 4-star insert knobs (6)* 4-star bolt knobs (6)* 1" round knobs (10)* Storage case (1)* Threaded inserts (16)* T-nuts (16) Note: Bottom plates on 5/16"-18 T-bolts measure 9/16" W x 7/8" L x 7/64" H.

    8 Review(s)
    $69.99
  9. 129-pc Jig Hardware Kit 1/4"-20 ($150 Value!)

    129-pc Jig Hardware Kit 1/4"-20 ($150 Value!)

    …T-bolts (10)* 3-1/2" T-bolts (10)* 5-star insert knobs (4)* 5-star bolt knobs (4)* 2" T-knobs (6)* 4-star insert knobs (6)* 4-star bolt knobs (6)* 1" round knobs (10)* Storage case (1)* Threaded inserts (16)* T-nuts (16) Note: Bottomplates on 1/4"-20 T-bolts measure 9/16" W x 11/16" L x 7/64" H.

    8 Review(s)
    $49.99 $39.99

    SAVE 20%

  10. Starrett® 6'' Combination Square with Square Head

    Starrett® 6'' Combination Square with Square Head

    …in 1/8" and 1/16" on one side of blade. Quick reading in 1/32" and 1/64" on other side.* Reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads.* Cast-iron head with black finish.* Made in USA.

    7 Review(s)
    $92.99
  11. Felt-Bottom Levelers

    Felt-Bottom Levelers

    Soft, smooth felt offers the highest degree of protection for wood floors. 1" of threads. Base measures 1" diameter 1/4-20 threads. Requires a threaded insert or t nut with ¼ x 20 internal threading. Four to a pack.

    2 Review(s)
    $4.19
  12. Edge Routing Dust Port

    Edge Routing Dust Port

    …Knurled nut offers tool-free installation.* Thread pattern for knurled nut is the same as a Porter Cable guide bushing, meaning replacement nuts are easily available.* Works with bits up to 1" in diameter.* Works with stock up to 1-3/8" thick.* Bearing must be at least 1/2" dia.* Dust port measures

    18 Review(s)
    $15.99
  13. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    With a table measuring 15-3/4" x 31-1/2", the CNC Shark is ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene…

    20 Review(s)
    $2899.99
  14. CNC Shark Pro Plus Routing System - Limited Quantities

    CNC Shark Pro Plus Routing System - Limited Quantities

    With a table measuring 28-1/2" x 36", the Shark Pro Plus is ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene…

    15 Review(s)
    $3799.99 $3499.99
  15. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …adjustable bearings to give more stability during heavy cutting. With a New interlocking Table design means more accuracy and less table flex. Measuring 27" x 36", it is ideally suited for carvings and machining operations on a large variety of signs, doors and other projects made from wood, soft…

    $3999.99 $3899.99
  16. CNC Shark Pro Plus

    CNC Shark Pro Plus

    With a table measuring 27" x 36", the Shark Pro Plus is ideally suited for carvings and machining operations on a variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can…

    $3799.99 $3699.99
  17. CNC Shark Black Diamond Edition w/FREE $50 Gift Card and Accessory Bundle

    CNC Shark Black Diamond Edition w/FREE $50 Gift Card and Accessory Bundle

    …890 series. To accommodate the greater torque levels, it features adjustable bearings to give more stability during heavy cutting. With a table measuring 28-1/2" x 36", it is ideally suited for carvings and machining operations on a large variety of signs, doors and other projects made from wood,…

    0 Review(s)
    $4289.98
  18. Large Toggle Clamp Foot

    Large Toggle Clamp Foot

    …gauge or wherever extended reach is needed. Includes nuts and washers. Clamps sold separately. * Standard 5/16"-18 TPI stud size works with most existing toggle clamps.* Foot has an overall diameter of 1-5/8", with a soft clamping pad that measures 1-3/8" in diameter.* Works great for pocket hole…

    4 Review(s)
    $3.99
  19. Undermount Utility Tray

    Undermount Utility Tray

    …as nuts and bolts. It makes the perfect spot to keep commonly used items, especially items that tend to roll, such as hardware, drill bits, drill drivers, screwdrivers and more. Technical Details:* The Undermount Utility Tray measures 16" x 4-1/4" x 1-1/4" overall.* Useable storage space measures

    $24.99
  20. DeWalt 12V MAX Compact Cordless 3/8'' Impact Wrench

    DeWalt 12V MAX Compact Cordless 3/8'' Impact Wrench

    …assemble your workbench in record time, or cinch down those lug nuts good and tight? Look no further than DeWalt's new compact, lightweight 12V MAX Impact Wrench. With 1150 in/lbs of torque, yet only 2.2 lbs of weight, it measures up to the big boys in all the right places. The 1/4" hex chuck makes…

    $149.00
  21. 6" Drawer Pack, Honey Maple Finish

    6" Drawer Pack, Honey Maple Finish

    …System in honey maple finish (34505, sold separately). Each Drawer Pack includes one drawer facing, two drawer sides, one drawer bottom, one drawer back, eight cam bolts, eight cam nuts, two drawer slides, fasteners, decorative hardware and mounting hardware. Drawer space measures 20" x 15".

    $59.99
  22. 6" Drawer Pack, Mahogany Finish

    6" Drawer Pack, Mahogany Finish

    …System in mahogany finish (37471, sold separately). Each Drawer Pack includes one drawer facing, two drawer sides, one drawer bottom, one drawer back, eight cam bolts, eight cam nuts, two drawer slides, fasteners, decorative hardware and mounting hardware. Drawer space measures 20" x 15".

    $59.99
  23. 8" Drawer Pack, Honey Maple Finish

    8" Drawer Pack, Honey Maple Finish

    …System in honey maple finish (34505, sold separately). Each Drawer Pack includes one drawer facing, two drawer sides, one drawer bottom, one drawer back, eight cam bolts, eight cam nuts, two drawer slides, fasteners, decorative hardware and mounting hardware. Drawer space measures 20" x 15".

    $79.99
  24. 8" Drawer Pack, Mahogany Finish

    8" Drawer Pack, Mahogany Finish

    …System in mahogany finish (37471, sold separately). Each Drawer Pack includes one drawer facing, two drawer sides, one drawer bottom, one drawer back, eight cam bolts, eight cam nuts, two drawer slides, fasteners, decorative hardware and mounting hardware. Drawer space measures 20" x 15".

    $79.99
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X