Ogee Router Bits

  • Items 1 - 24 of 58
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Roman Ogee Router Bits - 1/2" Shank

    Rockler Roman Ogee Router Bits - 1/2" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings.

    $31.99 From: $23.99

    SAVE 25%

  2. Rockler Ogee Stile and Rail Router Bit Set - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Ogee Stile and Rail Router Bit Set - 1-3/8" Dia x 1" H x 1/2" Shank

    These top-quality bits give you the high-performance you're looking for when creating ogee profile cope-and-stick door frames. The K10 and K20 grade carbide edges cut quickly and cleanly, keeping your router on track for a precision cut. Pair them with 1/4" flat panels or matching ogee raised panels…

    $99.99
  3. Freud® Ogee Router Bits - 1/4" Shank

    Freud® Ogee Router Bits - 1/4" Shank

    …millwork with these decorative ogee edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.*…

    From: $40.47
  4. Freud® 99-520 Quadra-Cut™ Ogee Raised Panel Router Bit - 3-1/2" Dia x 5/8" H x 1/2" Shank

    Freud® 99-520 Quadra-Cut™ Ogee Raised Panel Router Bit - 3-1/2" Dia x 5/8" H x 1/2" Shank

    This ogee panel raiser is ideal for creating raised panels for doors and wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut™ design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an…

    1 Review(s)
    $104.47
  5. Rockler Classic Ogee Router Bits - 1/2" Shank

    Rockler Classic Ogee Router Bits - 1/2" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks—the best choice for the smoothest cut and…

    From: $32.99
  6. Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    Creates a decorative inverted ogee profile on the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on…

    $57.47
  7. Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    …Decorative Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    1 Review(s)
    $54.99
  8. Freud® 99-521 Quadra-Cut™ Ogee Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Freud® 99-521 Quadra-Cut™ Ogee Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …carve out most of the cut, while two small cutters shear downward to clean up the edges with absolutely no fuzzing or chipping.* Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.* Cuts all composite materials, plywoods, hardwoods and softwoods.* Use on table-mounted portable routers.

    $98.97
  9. Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    …balance that makes it all the more versatile. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks stabilize the bit during the cut for the finest possible finish.

    2 Review(s)
    From: $39.99
  10. Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    Our Roman Ogee Plunge Bit can be used for any fluting application, and even for routing sign text, but it is perhaps most often used to create a panel door effect for painted MDF and solid wood. Roman Ogee in essence, the profile's radiused bottom gives a positive-negative effect to the cut shape of…

    1 Review(s)
    From: $23.99
  11. Rockler Miniature Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Rockler Miniature Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Using standard sized bits on small projects is like wearing shoes that are too big. Sometimes it works, but it just doesn't look right. Rockler miniature router Bits fill the need for appropriately sized bits for jewelry boxes, humidors, and other small boxes and crafts. They feature the same…

    1 Review(s)
    $19.99
  12. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

    $79.99
  13. Freud® 99-510 Quadra-Cut™ Ogee Raised Panel Router Bit - 2-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-510 Quadra-Cut™ Ogee Raised Panel Router Bit - 2-3/4" Dia x 5/8" H x 1/2" Shank

    …to shear the top edge for a splinter-free surface and two large wings that shear upward for the most efficient chip ejection.* Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers.

    $98.97
  14. Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    2 Review(s)
    From: $64.99
  15. Rockler Ogee Base Molding Router Bit - 1-7/8" Dia x 3/4" H x 1/2" Shank

    Rockler Ogee Base Molding Router Bit - 1-7/8" Dia x 3/4" H x 1/2" Shank

    …available only at Rockler! Designed especially for base molding, this carbide-tipped router bit also works well for edge-shaping tabletops, box and trunk tops, picture frames, and more. The classic Roman ogee profile softens the field while maintaining sharp definition at the corners. Two flute,…

    $59.99
  16. Freud® 99-005 Classical Roman Ogee Router Bit - 1-1/2" Dia x 21/32" H x 1/2" Shank

    Freud® 99-005 Classical Roman Ogee Router Bit - 1-1/2" Dia x 21/32" H x 1/2" Shank

    …to cabinets, furniture, plaques, and millwork with this decorative ogee bit. It features a small step at the top, adding a bit of definition to the graceful ogee curve. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted routers. Sturdy 1/2" shank.

    $44.97
  17. Freud® 97-260 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank

    Freud® 97-260 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank

    …contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8"…

    $201.97
  18. Freud® 94-150 Door System Router Bit Set - 1/2" Shank

    Freud® 94-150 Door System Router Bit Set - 1/2" Shank

    …a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks. Also includes Freud's Door Lip Bit, Reversible Glue Joint and Ogee Panel Bit.

    $269.47
  19. Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  20. Freud® 99-450 Quadra-Cut™ Ogee Table Edge and Handrail Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    Freud® 99-450 Quadra-Cut™ Ogee Table Edge and Handrail Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    …cuts in difficult materials. The profile can be easily combined with our Handrail Router Bit (91708, sold separately) to create a custom handrail out of any species of wood.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    1 Review(s)
    $88.97
  21. Freud® 99-513 Quadra-Cut™ Ogee Raised Panel Router Bit - 2-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-513 Quadra-Cut™ Ogee Raised Panel Router Bit - 2-3/4" Dia x 5/8" H x 1/2" Shank

    …that shear upward for the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.* 5/8" carbide height is ideal for 3/4" stock.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers.

    1 Review(s)
    $98.97
  22. Rockler Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank

    Rockler Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    2 Review(s)
    $54.99
  23. Rockler OE833 Twin Step Ogee Router Bit - 1-1/4" Dia x 3/8" H x 1/2" Shank

    Rockler OE833 Twin Step Ogee Router Bit - 1-1/4" Dia x 3/8" H x 1/2" Shank

    …Twin Step Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and is silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $44.99
  24. Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Don't let ordinary router profiles overwhelm your more subtle projects. Rockler's miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts. This one features an attractive dual radius with the option of creating a shoulder on the…

    $19.99
  • Items 1 - 24 of 58
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X