Oneway Lathe

  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
  1. Oneway Talon Chuck System

    Oneway Talon Chuck System

    This is an ideal chuck for owners of mini and mid-size lathes who want a power-grip, key-operated chuck. It's perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. The nickel-plated…

    6 Review(s)
    $213.50
  2. 1" X 8 TPI Insert for Oneway Scroll Chuck System

    1" X 8 TPI Insert for Oneway Scroll Chuck System

    Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1" x 8 TPI drive spindle.

    $31.49
  3. Taper-Lock Adapter for Stronghold Chuck, 1"-8, RH/LH

    Taper-Lock Adapter for Stronghold Chuck, 1"-8, RH/LH

    …to mount a Oneway Stronghold Chuck (30589, sold separately) to a lathe with a 1" x 8 TPI drive spindle.Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761, sold separately) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the…

    $31.49
  4. Jumbo Jaws for Oneway Stronghold Chuck

    Jumbo Jaws for Oneway Stronghold Chuck

    …External (compression): 2-3/4" minimum, 11" maximum* Internal (expansion): 4-3/4" minimum, 12" maximum Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

    $110.29
  5. Oneway Stronghold Chuck

    Oneway Stronghold Chuck

    …The Stronghold chuck is the largest chuck in the Oneway family, designed for lathes with a 16" swing or greater. It weighs approximately 8 lbs (fully assembled with the No. 2 Jaws). It is considerably heavier than the Talon Chuck (3.5 lbs) or Oneway Chuck (4.5 lbs) which makes it perfect for large…

    3 Review(s)
    $274.99
  6. Oneway Scroll Chuck System

    Oneway Scroll Chuck System

    2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening! ONEWAY chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Chucks were designed to meet most turning needs.…

    $195.29
  7. Spigot Jaws for Oneway Stronghold Chuck

    Spigot Jaws for Oneway Stronghold Chuck

    …External (compression): 3/8" minimum, 1-7/8" maximum* Internal (expansion): 1-1/8" minimum, 2-5/8" maximum Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

    $52.49
  8. #3 Jaws for Oneway Stronghold Chuck

    #3 Jaws for Oneway Stronghold Chuck

    …External (compression): 3-7/8" minimum, 5-1/4" maximum* Internal (expansion): 4-1/2" minimum, 6" maximum Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

    $57.79
  9. Mega Jumbo Jaws for Oneway Stronghold Chuck

    Mega Jumbo Jaws for Oneway Stronghold Chuck

    …External (compression): 1-3/4" minimum, 14" maximum* Internal (expansion): 4-3/4" minimum, 15" maximum Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

    $133.39
  10. Spigot Jaws for Oneway Talon Chuck

    Spigot Jaws for Oneway Talon Chuck

    The Oneway Spigot Jaws are machined long and deep for a secure grip on narrow spindles, tenons and cups. Serrations on the outside provide excellent grip while expansion chucking. External (compression) chucking capacity: 1/4" to 1-5/8". Internal (expansion) chucking capacity: 1" to 2-3/8". Note:…

    $45.19
  11. #3 Jaws for Oneway Scroll Chuck System

    #3 Jaws for Oneway Scroll Chuck System

    …have also been outfitted with Oneway's patented profiled jaw design. Chucking capacities of the Oneway Scroll Chuck with #3 Jaws:* External (compression): 3-3/8" minimum, 4-3/4" maximum* Internal (expansion): 3-7/8" minimum, 5-3/8" maximum Chucking capacities of the Oneway Talon Chuck with #3 Jaws:*…

    $58.79
  12. #1 Jaws for Oneway Scroll Chuck System

    #1 Jaws for Oneway Scroll Chuck System

    Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles. Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:* External (compression): 3/8" minimum, 2" maximum* Internal (expansion):…

    $52.49
  13. Jumbo Jaws for Oneway Scroll Chuck System

    Jumbo Jaws for Oneway Scroll Chuck System

    …of round, oval or square shapes. Chucking capacities of the Oneway Scroll Chuck with Jumbo Jaws:* External (compression): 2-7/8" minimum, 11" maximum* Internal (expansion): 4-7/8" minimum, 12" maximum Chucking capacities of the Oneway Talon Chuck with Jumbo Jaws:* External (compression): 2-7/8"…

    $115.49
  14. 1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System

    1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System

    Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle.

    $31.49
  15. 3/4" X 16 TPI Insert for Oneway Scroll Chuck System

    3/4" X 16 TPI Insert for Oneway Scroll Chuck System

    Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 3/4" x 16 TPI drive spindle.

    $31.49
  16. Mini Jumbo Jaws for Oneway Scroll Chuck System

    Mini Jumbo Jaws for Oneway Scroll Chuck System

    Because of their 8-1/2" diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo…

    $102.99
  17. Taper-Lock Adapter for Stronghold Chuck, 1-1/4"-8, RH/LH

    Taper-Lock Adapter for Stronghold Chuck, 1-1/4"-8, RH/LH

    …to mount a Oneway Stronghold Chuck (30589, sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle. Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761, sold separately) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or…

    $29.39
  18. Carter Hollow Roller™ Mounting Stud 1000-45

    Carter Hollow Roller™ Mounting Stud 1000-45

    Adapt your lathe to use the Carter Hollow Roller™ Vessel Turning System using this easily installed Mounting Stud! Works with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool rest post. Includes a second…

    $29.99
  19. Carter Hollow Roller™ Mounting Stud 1000-60

    Carter Hollow Roller™ Mounting Stud 1000-60

    Oneway 2036, Oneway 2436, Powermatic 3520, Powermatic 4224 and most lathes with a longer 1" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Laguna 163, Oneway

    $24.99
  20. Carter Hollow Roller™ Vessel Turning System

    Carter Hollow Roller™ Vessel Turning System

    …for all size lathes from mini's to full size* Made in USAMounting Studs Necessary for Adapting Roller System to Lathe:* 45036 - Mounting Stud Works with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool…

    1 Review(s)
    $358.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
Feedback X