Panel Cutter

  • Items 1 - 24 of 63
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud 97-250, 3-Piece Door Set

    Freud 97-250, 3-Piece Door Set

    …bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating…

    $183.47
  2. Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    If you need to trim a precise amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router…

    5 Review(s)
    $89.99
  3. Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    …this panel raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels

    4 Review(s)
    $119.97
  4. Straight Panel Bit with Back Cutter P636

    Straight Panel Bit with Back Cutter P636

    Use this Straight Raised Panel Bit with Back Cutter (P636) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting…

    $142.99
  5. Safety Speed Cut Panel Pro 2 Panel Saw

    Safety Speed Cut Panel Pro 2 Panel Saw

    …Ideal for cabinet making, building construction, remodeling, home projects, and small lumberyards. The functionality and portability of the Panel Pro allows convenient use in your shop or on the jobsite. Benefits:* One person sawing that is easy and accurate* Cuts both vertically and horizontally*…

    From: $898.99
  6. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    Use this Cove Raised Panel Bit (P602) with its integral guide bearing to raise both straight and arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4"…

    0 Review(s)
    $142.99
  7. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Use this high-performance 2-3/4" diameter cutter for creating raised panels for doors and wainscoting, as well as decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ four-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with…

    $98.97
  8. Back Cutter Router Bit

    Back Cutter Router Bit

    …flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The same goes for raised panels. Instead of planing off the back side, you can leave the panel at 3/4" thick and use the Back Cutter to…

    0 Review(s)
    $44.99
  9. Freud Quadra-Cut™ Bevel Raised Panel Bits

    Freud Quadra-Cut™ Bevel Raised Panel Bits

    This straight panel raiser cuts a classic design most famously employed in Shaker furniture. It is primarily designed to raise Shaker panels, but can also be used to bevel the underside of table tops. It features Freud's exclusive Quadra-Cut™ 4-cutter design, which provides the smoothest cuts…

    1 Review(s)
    From: $98.97
  10. Shaker Raised Panel 3-Piece Bit Set

    Shaker Raised Panel 3-Piece Bit Set

    panel that fits into the groove. The Shaker style profile features a simple chamfer along the inside edges of the frame, as well as on the panel. 1/2" shank router bits with high-grade carbide cutters. Use with stock up to 3/4" thick. Also ideal for drawer fronts to complement your raised panel

    $209.99
  11. Freud 54-760 Glass Panel Door Cutter

    Freud 54-760 Glass Panel Door Cutter

    This cutter is made exclusively for routing rabbets for glass panel doors. It is precisely dimensioned to work with the arbor and cutters included with the Freud Premier Adjustable Rail and Stile Bit Sets (e.g. 37161, sold separately).

    $35.97
  12. Ogee Raised Panel Bit with Back Cutter P605

    Ogee Raised Panel Bit with Back Cutter P605

    Use this Ogee Raised Panel Bit with Back Cutter (P605) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting…

    $137.79 $103.34

    SAVE 25%

  13. Rockler T-Slotwall Cutter Bit

    Rockler T-Slotwall Cutter Bit

    …storage system. This bit hogs out the slots so you can keep your tools visible and within easy reach. It allows you to reuse scrap wood or left over panels as shop storage. Note: Not intended to create T-slots for jigs. If that is your goal, use bit 26099.* Carbide-tipped bit cuts 5/16" x 1-1/16"…

    7 Review(s)
    $34.99
  14. Panel Saw Lower Extensions for Panel Pro 2 Panel Saw

    Panel Saw Lower Extensions for Panel Pro 2 Panel Saw

    Cutting large panels on your Panel Pro 2 Panel Saw is easier than ever when you add a pair of Lower Extensions! These extensions add 20" to each side of your saw, giving you the option to effortlessly crosscut or rip even larger panels. Includes mounting screws for quick, easy installation.…

    $98.99
  15. 2-Piece Rail/Stile Shaker Cutter Bit Set

    2-Piece Rail/Stile Shaker Cutter Bit Set

    These bits cut tight-fitting cope and stick joints for Shaker style door frames. Pair the door frame with a flat 1/4" panel, or with our Shaker raised panel cutter (40430, sold separately), which features a matching bevel. Bearing-guided to prevent dips and ensure a perfect fit. Sturdy 1/2" shanks…

    $109.99
  16. Upper Extension Bracket Kit for Panel Pro 2 Panel Saw

    Upper Extension Bracket Kit for Panel Pro 2 Panel Saw

    …upper supports to your Panel Pro 2 Panel Saw! The brackets attach to the back of the frame, making it possible to add a couple of 2 x 4s and keep your sheet goods stable while ripping or cross-cutting. Technical Details* Brackets attach to the back of the Panel Pro 2 Panel Saw frame* Adds stability…

    $19.99
  17. Dust Kit for Panel Pro 2 Panel Saw

    Dust Kit for Panel Pro 2 Panel Saw

    …Safety Speed Cut Panel Pro 2 Panel Saw with this Dust Collection Kit! Includes a 10' hose, rollers, dust tube, and a steel elbow that give you a customized fit for optimum dust collection. Technical Details: * Captures dust and debris while using your Safety Speed Cut Panel Pro 2 Panel Saw* Includes…

    $99.99
  18. Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank

    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank

    This arbor includes two slotting cutters, two bearings and a pack of shims that allow you to configure and adjust the cutter for perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove wainscoting, or just for edge joining long…

    10 Review(s)
    $57.99
  19. Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank

    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank

    This arbor includes two slotting cutters, two bearings and a pack of shims that allow you to configure and adjust the cutter for perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove wainscoting, or just for edge joining long…

    10 Review(s)
    $59.99
  20. Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding*…

    2 Review(s)
    From: $104.47
  21. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    panel raiser to shape raised panels for doors and paneling. It can also be used for decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. Two large cutters shear upward to carve out most of the cut, while two small cutters

    $98.97
  22. Quick Stop Angle with Stop for Panel Pro 2 Panel Saw

    Quick Stop Angle with Stop for Panel Pro 2 Panel Saw

    Right and Left Quick-Stop Angles make repetitive cuts a breeze! By using the sliding stop blocks, you can position your work piece in seconds for quick, repetitive cutting applications. Ideal for everything from cutting sheet goods to cutting 2x4s for framing projects. Technical Details: * Makes it…

    $79.99
  23. Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    …these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers. Application: Producing panels from 3/4" stock that are flush with the door frame for a professional,…

    1 Review(s)
    $119.97
  24. Vertical Panel Router Bit Set With Wooden Case

    Vertical Panel Router Bit Set With Wooden Case

    …need to create raised panel doors of nearly any size. The panel raiser is vertically oriented, which is ideal for smaller routers, and features a 5/8" radius ogee profile that goes well with the beaded profile on the stick work. The stile and rail cutters are full height cutters. This means that if…

    1 Review(s)
    $149.99
  • Items 1 - 24 of 63
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X