Pattern Cutting Bit

  • Items 1 - 24 of 38
  • Page:
    1. 1
    2. 2
  1. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  2. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …allows you to choose the cutting direction that best suits your work piece. Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed…

    From: $34.47
  3. Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99
  4. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    …this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting.

    5 Review(s)
    $18.99
  5. Rockler Router Plate Template

    Rockler Router Plate Template

    …are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our 1/2" Pattern Cutting Bit #33536 (sold separately, but other 1/2" pattern bits also work.* For best results, mount the template to the desired location of the router plate installation using…

    15 Review(s)
    $10.99
  6. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  7. Rockler Train Track Router Bits

    Rockler Train Track Router Bits

    …to your imagination. Use the Double Groove Bit to cut both track grooves in a single pass—ideal for straight sections of track. The Singe Groove Bit, on the other hand, is used to cut the grooves in curved sections of track. Use the remaining two bits to machine the male and female portions of…

    6 Review(s)
    From: $19.99
  8. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    …tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates, veneers, and in thicker materials as well.* 3/4" diameter body and full 1" or 2" cutting length provide the stability and cutting capacity for thick…

    3 Review(s)
    From: $32.97
  9. Chinese Checkers Template

    Chinese Checkers Template

    …marbles (star pattern), and a line marking template for cutting the valleys for marbles to rest when not in play. Template measures 10" x 12-3/4". Don't forget to buy the appropriate bits! For routing the valleys to store marbles not in play, use the Plunge Ball Marble Storage Router Bit (#11708).…

    7 Review(s)
    $49.99
  10. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99
  11. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $17.99
  12. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  13. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t…

    From: $20.47
  14. Freud® 99-462 Window Stool Router Bit - 1-13/32" Dia x 1" H x 1/2" Shank

    Freud® 99-462 Window Stool Router Bit - 1-13/32" Dia x 1" H x 1/2" Shank

    …based on a traditional New Orleans design. * Suitable for 11/16" or 3/4" thick material. * Includes a ball bearing guide for use with patterns or to align the fence. * Cuts all composition materials, plywoods, hardwoods and softwoods. * Use on hand-held and table-mounted portable routers.

    1 Review(s)
    $60.47
  15. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't…

    1 Review(s)
    From: $51.47
  16. Freud® Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Bearing Flush Trim Router Bits - 1/4" Shank

    …are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers. Application: Trimming laminate counter tops and doing pattern

    From: $16.97
  17. CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    …deep cuts.* Template material is 1/2" MDF (all templates are produced on a CNC router, ensuring perfect curves and straight lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl…

    3 Review(s)
    $112.99
  18. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    …tops and doing intricate pattern work with templates is a breeze with this flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all composition materials,…

    From: $18.97
  19. Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

    Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

    Based on a miniature Roman ogee design, this profile can be used in successive cuts, then ripped down for astragals, in series for decorative fluting patterns, or in single cuts for a flat bottom trench with profiled sides. 3/4" diameter with a sturdy, vibration-free 1/2" shank.

    1 Review(s)
    $26.99
  20. Rockler Domino Templates and Bit, with FREE Downloadable Domino Box Plan!

    Rockler Domino Templates and Bit, with FREE Downloadable Domino Box Plan!

    bit and templates to drill the "spots" in your blank, then cut out your dominoes. The guide notches provide easy reference for cutting accuracy.* Two templates makes one full set of double-six dominoes (28 tiles).* Includes two drilling templates and a spring-loaded, hex-shank Domino Drill Bit.*

    8 Review(s)
    $45.99
  21. 2-pc. Professional Series Tenon Cutter Starter Kit

    2-pc. Professional Series Tenon Cutter Starter Kit

    …forstner bits, sanding tubes and drum, quick stop system and a set of five project plans which include a coffee table, end table, headboard, coat rack and more. Tenon cutters are machined from aluminum for maximum precision and minimum weight and feature dual blades for quick cuts and minimal…

    $399.00
  22. Bandsaw Duplicating Pin

    Bandsaw Duplicating Pin

    …shapes as you need - perfect for cathedral style doors. The pin can be adjusted to cut just a hair oversized to make final sizing quick and easy; simply leave the template in place and use a flush cutting bit to rout to the line. Attaches easily; just secure it to your guide block/bearing studs…

    8 Review(s)
    $8.99
  23. 5-piece Pro Series Professional Tenon Cutter Kit

    5-piece Pro Series Professional Tenon Cutter Kit

    …2" tenon cutters, forstner bits, quick stop system and plans for five furniture projects including a headboard, coffee table, coat rack and more. Tenon cutters are machined from aluminum for maximum precision and minimum weight and feature dual blades for quick cuts and minimal heat generation.…

    $799.00
  24. 3-piece Professional Series Master Tenon Cutter Kit

    3-piece Professional Series Master Tenon Cutter Kit

    …Includes 1",1-1/2" and 2" tenon cutters, forstner bits, quick stop system and a set of five plans for popular furniture projects. Tenon cutters are machined from aluminum for maximum precision and minimum weight and feature dual blades for quick cuts and minimal heat generation. Note: The 3-piece…

    $569.00
  • Items 1 - 24 of 38
  • Page:
    1. 1
    2. 2
Feedback X