Pattern Bit

  • Items 1 - 24 of 86
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  2. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    …this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting.…

    5 Review(s)
    $18.99
  3. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …direction that best suits your work piece. Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to…

    From: $34.47
  4. Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99
  5. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  6. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  7. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  8. Bandsaw Duplicating Pin

    Bandsaw Duplicating Pin

    …The pin can be adjusted to cut just a hair oversized to make final sizing quick and easy; simply leave the template in place and use a flush cutting bit to rout to the line. Attaches easily; just secure it to your guide block/bearing studs with the included hardware assortment.* Easily attaches to…

    8 Review(s)
    $8.99
  9. Rockler Router Plate Template

    Rockler Router Plate Template

    …are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our 1/2" Pattern Cutting Bit #33536 (sold separately, but other 1/2" pattern bits also work.* For best results, mount the template to the desired location of the router plate installation using…

    15 Review(s)
    $10.99
  10. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  11. CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    …lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl and Tray router bit: 1-1/4" diameter; carbide tipped; shear angle; 1/2" shank.* Instructional DVD is 38 minutes long.

    3 Review(s)
    $112.99
  12. 7/32'' Pro Shelf Drilling Bit

    7/32'' Pro Shelf Drilling Bit

    Use the 7/32" Pro Shelf Bit with the Rockler Pro Shelf Drilling Jig (31571, sold separately) when you plan to install 5mm shelf pin supports with pin sleeves.

    $16.49
  13. 3-1/2'' Movable Louver w/Front Control Arm Shutter Jig and Hardware

    3-1/2'' Movable Louver w/Front Control Arm Shutter Jig and Hardware

    …Drill bits have self-centering tips that fit perfectly into specific shutter template mounting holes* A spring-loaded guide in the drill bits retract as pressure is applied and the drill bit advances* Drill bits have a 1/4" hex power bit shank* 1/4" drill bit measures 4"L* 3/32" drill bit measures…

    From: $3.49
  14. Edge Routing Dust Port

    Edge Routing Dust Port

    …Cable template guide bushing.* Knurled nut offers tool-free installation.* Thread pattern for knurled nut is the same as a Porter Cable guide bushing, meaning replacement nuts are easily available.* Works with bits up to 1" in diameter.* Works with stock up to 1-3/8" thick.* Bearing must be at least…

    19 Review(s)
    $15.99 $11.99

    SAVE 25%

  15. Steelman Pen Hardware Kit - Gold-Plated/Chrome

    Steelman Pen Hardware Kit - Gold-Plated/Chrome

    …appearance, the Steelman Pen Hardware Kit is just as likely to impress metalworkers as it is woodworkers. The top barrel is cut in a diamond pattern, and is very reflective. The hinged, spring-action pocket clip helps to prevent clip breakage, and makes it easy to clip the pen onto thicker items,…

    $13.99
  16. Beveled Leaded Glass Panels

    Beveled Leaded Glass Panels

    Add a bit of style throughout your kitchen, or add an accent glass panel! Choose from four patterns. Technical Details:* Kitchen safe, 1/4" thick, beveled lead-free panels.* Choose from four patterns: Manchester, Tudor, Linear and Prairie.* Special order and custom made to your dimensions. Minimum…

    From: $0.89
  17. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $2.99

    SAVE 70%

  18. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  19. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $17.99
  20. Black Maple Pauamarillo Striped Inlay Banding, 3/8'' W

    Black Maple Pauamarillo Striped Inlay Banding, 3/8'' W

    Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note:…

    $16.99
  21. Chinese Checkers Template

    Chinese Checkers Template

    …marbles (star pattern), and a line marking template for cutting the valleys for marbles to rest when not in play. Template measures 10" x 12-3/4". Don't forget to buy the appropriate bits! For routing the valleys to store marbles not in play, use the Plunge Ball Marble Storage Router Bit (#11708).…

    7 Review(s)
    $49.99
  22. Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    …7/16", 11/16", 13/16" x 8 degree dovetail bits * 7/16" x 1-1/4" CL straight, 1/2" x 1-1/4" CL straight bits * 1/2" x 10 degree, 12 degree, and 18 degree dovetail bits * 1/2" and 8mm shank bits, 1/2" to 8mm collet reducer* Note: The accessory kit is…

    10 Review(s)
    $795.00
  23. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal…

    1 Review(s)
    From: $51.47
  24. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …Signmaker's Carbide Router Bit (36676, sold separately) and a router with a perforated base.* 3-3/8" Kit (#43820) requires 5/8" Signmaker's Carbide Router Bit (32443, sold separately) and a router with a perforated base.* The uniquely designed sign making router bits (sold separately) are…

    24 Review(s)
    From: $49.99
  • Items 1 - 24 of 86
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X