Pilot Router Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 8 of 8
  • Page:
    1. 1
  1. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    $27.99 From: $18.99

    SAVE 32%

  2. Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $4.99

    SAVE 50%

  3. Freud Rabbeting Bits With Bearings

    Freud Rabbeting Bits With Bearings

    …feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    2 Review(s)
    From: $42.47
  4. Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    $34.99
  5. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  6. Freud # 66-100 1/4'' Solid Carbide Bevel Trim Router Bit, 1/4'' Shank

    Freud # 66-100 1/4'' Solid Carbide Bevel Trim Router Bit, 1/4'' Shank

    …edge, so the bit self-pilots against the substrate. Without the need a bearing guide, you won't have to worry about contact cement gumming up the ball bearings. Use on hand-held routers, table-mounted portable routers, and laminate trimmers. * The Freud 66-100 solid carbide bit creates a 7-degree…

    $9.47
  7. Freud Rabbeting Bits With Bearings - 1/4'' Shank

    Freud Rabbeting Bits With Bearings - 1/4'' Shank

    …and letting in back panels.* Produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.47
  8. Freud # 64-100 Solid Carbide Flush Trim Bit, 1/4'' Dia. x 3/8''H, 1/4'' Shank

    Freud # 64-100 Solid Carbide Flush Trim Bit, 1/4'' Dia. x 3/8''H, 1/4'' Shank

    …on CNC and other automatic routers as well as hand-held and tablemounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD™ Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and…

    $9.47
  • Grid List
  • Page:
    1. 1
  • Items 1 - 8 of 8
  • Page:
    1. 1
Feedback X