Plastic Insert

  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
  1. Hinge Dowel Repair Kit

    Hinge Dowel Repair Kit

    …jiffy with this Hinge Dowel Repair Kit! Designed for 35mm European cabinet hinges, you get eight #6 x 1/2" dowel screws and eight 8mm plastic dowels that are inserted into loose holes to provide a tight grip that keeps your hinge tight to your cabinet door. Technical Details:* Firms up loose screw…

    $2.19
  2. Confetti Lamp Inserts

    Confetti Lamp Inserts

    insert includes a fiberglass wick, wick holder and a glass insert which holds up to 2 ounces of lamp oil (not included). This will be enough to keep them burning for up to 2 hours. Set includes 4 inserts and 2 plastic funnels for filling oil. Technical Details:* 1-1/2" diameter oil lamp inserts*

    $12.99
  3. Festool SYS-STF D125 Abrasives Systainer with New T-Loc

    Festool SYS-STF D125 Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to hold various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor.…

    $80.00
  4. Drill Guide Kit

    Drill Guide Kit

    Drill straight and true holes every time with the Drill Guide Kit. The drill guide kit allows you to insert a steel bushing into the plastic guide so you can drill perfectly perpendicular holes. An ingenious design also centers your drill bit on edges. The drill guide kit also works to drill holes…

    19 Review(s)
    $15.49
  5. Plastic Leveler Glides

    Plastic Leveler Glides

    …engineered plastic to provide a smooth gliding surface. Technical Details* Base is 1-1/8" in diameter x 3/8" high* Bolt Length: 1-1/2"* Stem is made of zinc plated steel Best Used With: Steel 5/16"-18 Threaded Inserts, Brass 5/16"-18 Threaded Inserts, Hex Drive 5/16"-18 Threaded Inserts or T-Nuts

    5 Review(s)
    $5.99
  6. Zero Clearance Bandsaw Insert

    Zero Clearance Bandsaw Insert

    …semi-rigid, plastic inserts snap in to replace your old, beat-up throat plate. Ideal for scrollwork, small or fragile parts, and woods prone to splintering, these inserts provide a solid base for your workpiece at very little cost. Will not dull your saw teeth. Sold in sets of 5. * Delta inserts are…

    26 Review(s)
    $10.99
  7. Low Profile Shelf Supports

    Low Profile Shelf Supports

    These Low Profile Supports are totally concealed once shelf is installed. Installing is simple, just cut a 1/8" mortise in the shelf edges.* Made of brown plastic.* Inserts into 5mm hole.* Comes in packs of 16.

    1 Review(s)
    $4.59
  8. 3/4" Round Knob, insert, 10-24 tpi

    3/4" Round Knob, insert, 10-24 tpi

    …provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs. Technical Details* 3/4" knob diameter* 34186 includes a 10-24 TPI threaded insert, 34160 includes a 1/2" long 10-24 TPI bolt* Knobs are durable plastic

    $1.99
  9. Ball Knob for Shop Jigs

    Ball Knob for Shop Jigs

    Ball knob has an easy-grip round profile. The 2" diameter fits securely in your palm. Made from rugged plastic with 5/16" -18 threaded brass insert.

    $3.19
  10. Bench Dog® 40-150 ProLift Router Adjustment System

    Bench Dog® 40-150 ProLift Router Adjustment System

    …looking for a powerful lift that moves faster and lasts longer, this is it!* Plate size: 8-1/4" x 11-3/4"* Plastic insert ring with 1-1/2" opening* Compatible with large opening inserts.* Vertical travel: 5.5" (varies slightly w/ installation)* Height adjuster: 0-1/8 scale, 0.0025" increments*…

    17 Review(s)
    $349.99
  11. Festool SYS-STF Delta 100 x 150 Abrasives Systainer with New T-Loc

    Festool SYS-STF Delta 100 x 150 Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to hold various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor.…

    $80.00
  12. Festool SYS-STF D150 Abrasives Systainer with New T-Loc

    Festool SYS-STF D150 Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to hold various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor.…

    $90.00
  13. Festool SYS-STF D115 Abrasives Systainer with New T-Loc

    Festool SYS-STF D115 Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to hold various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor.…

    $80.00
  14. Festool SYS-STF 115 x 228 Abrasives Systainer with New T-Loc

    Festool SYS-STF 115 x 228 Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to hold various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor.…

    $85.00
  15. Festool RO 90 DX Abrasives Systainer with New T-Loc

    Festool RO 90 DX Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to organize various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your…

    $80.00
  16. Brown Cap for 3/4" Cams, (8 per Pack)

    Brown Cap for 3/4" Cams, (8 per Pack)

    Brown plastic caps cover the cams of Minifix (KD) Fittings to provide a finished look. Package of 8.

    $1.19
  17. White Caps for 3/4" Cams, (8 per Pack)

    White Caps for 3/4" Cams, (8 per Pack)

    White plastic caps cover the cams of Minifix (KD) Fittings to provide a finished look. Package of 8.

    $1.19
  18. Festool SYS-STF 80x133mm Abrasives Systainer with New T-Loc

    Festool SYS-STF 80x133mm Abrasives Systainer with New T-Loc

    …single point latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Also includes a rugged plastic insert custom molded to hold various abrasives. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor.…

    $80.00
  19. Deluxe Jig Handle

    Deluxe Jig Handle

    …molded plastic construction with two threaded inserts embedded in the bottom for solid and easily removable attachment to push blocks, router table sleds and more. Technical Details* Comfortable, ergonomic design is perfect for push blocks and other jigs.* Base has two 1/4"-20 threaded inserts for…

    6 Review(s)
    $4.99
  20. T-Track Tape Measures-T-Track Tape Measures

    T-Track Tape Measures-T-Track Tape Measures

    …backing that can be attached to Rockler Flip Stops (26991 and 31214) or other homemade stops. Inserts are plastic extrusions with a steel rule. The 48" steel rule can be cut to fit the 36" plastic extrusion depending on your needs. Cut your steel measure for either a standard 36" length or beginning…

    4 Review(s)
    From: $10.99
  21. Fein MultiMaster MiniCut and File Set

    Fein MultiMaster MiniCut and File Set

    …MiniCut and File Set includes: 2 MiniCut Saw Blades for wood and soft plastics, 2 HSS MiniCut Saw Blades for hard plastics, fiberglass and sheet metal, 1 diamond file, and 1 carbide file. With the new carbide file insert grooves can be filed out cleanly - and wood and plastic completely deburred.

    1 Review(s)
    $36.99
  22. Festool SYS 1 Universal Systainer with New T-Loc

    Festool SYS 1 Universal Systainer with New T-Loc

    …latch is so versatile, you can open a T-Loc Systainer even if it's stacked in the middle of other units. Includes a one-piece rugged plastic sectionalized insert with integrated hinged lid. Mounts easily on Festool's CT Dust Extractors so you can move your sandpaper along with your extractor. Be…

    $80.00
  23. 3/4" Round Knob, 1/2" long bolt, 10-24 tpi

    3/4" Round Knob, 1/2" long bolt, 10-24 tpi

    …provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs. Technical Details* 3/4" knob diameter* 34186 includes a 10-24 TPI threaded insert, 34160 includes a 1/2" long 10-24 TPI bolt* Knobs are durable plastic

    $1.89
  24. Dimpled Base Plate for Festool Carvex Jigsaws

    Dimpled Base Plate for Festool Carvex Jigsaws

    This low-friction base insert has outstanding glide properties. The dimpled, plastic bottom offers lower resistance, especially when sawing without dust extraction. Because of the design, dust will not accumulate at the front of the base as you cut. Instead, it flows through the dimpled pattern…

    $23.00
  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
Feedback X