Plywood Blade

  • Items 1 - 24 of 35
  • Page:
    1. 1
    2. 2
  1. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    …resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a…

    5 Review(s)
    From: $52.47
  2. Freud® LU73M Industrial Cabinetmaker's Crosscut Saw Blades

    Freud® LU73M Industrial Cabinetmaker's Crosscut Saw Blades

    This heavy-duty blade is designed primarily for heavy use in a cabinetmaker's shop. Combining a 10° hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a…

    From: $62.97
  3. Freud® LU80R Ultimate Plywood and Melamine Blades

    Freud® LU80R Ultimate Plywood and Melamine Blades

    Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine. Technical Details:* Designed to produce the cleanest cuts possible in plywood and melamine with no bottom splinter.* Application-specific super micrograin carbide teeth are 50-60%…

    5 Review(s)
    From: $94.47
  4. Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    …veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!

    2 Review(s)
    $94.97
  5. Double Edge Trimmer

    Double Edge Trimmer

    Simply squeeze to cleanly trim both edges flush with plywood faces. Trimmer houses four blades that cut flush with the edges and four blades that cut at a 45° bevel angle that are held in a spring-loaded mechanism that you simply squeeze until flush with the edges of your material. Full closed…

    31 Review(s)
    $22.99
  6. Forrest 10" x 80T Duraline Melamine and Plywood Saw Blade

    Forrest 10" x 80T Duraline Melamine and Plywood Saw Blade

    …you refined cuts every time. The double hard C4 garbide teeth and high angle alternate tooth bevel (HiATB) design of the Forrest Duraline blade give you extra-clean cuts in melamine, hard and soft wood, and veneered plywood. Technical Details:* 10" x 80 Tooth* .125 Kerf* 5/8" Arbor* 40 Degree HiATB

    1 Review(s)
    $169.99
  7. Festool 80-Tooth Fine Tooth Kapex Saw Blade

    Festool 80-Tooth Fine Tooth Kapex Saw Blade

    …saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…

    $146.00
  8. Fine Tooth Saw Blade for Festool TS 75 EQ

    Fine Tooth Saw Blade for Festool TS 75 EQ

    …Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to…

    $120.00
  9. Freud® 10'' x 60T Precision Crosscut Saw Blade - 49508

    Freud® 10'' x 60T Precision Crosscut Saw Blade - 49508

    …most precise, easy crosscuts in solid woods and plywood. The Silver I.C.E. coating helps resist heat and pitch build-up two times longer than standard polished steel blades. This extra protection helps reduce drag, extending the life of your blade and your saw motor. Available exclusively at…

    $79.99
  10. Festool Carvex Jigsaw Blades

    Festool Carvex Jigsaw Blades

    …hardwood, melamine, veneered plywood, and chipboard.* Cross-set teeth with 6 TPI for fine cuts, saving time on rework.* HCS tool steel quality blades.* Universal T-shank design fits most professional jigsaws.* 3"L blades cut through material up to 2-1/8" thick.* 4-1/8"L blades cut through material…

    From: $14.00
  11. Festool Jigsaw Blades S 75/2.5

    Festool Jigsaw Blades S 75/2.5

    The S 75/2.5 jigsaw blade is an excellent choice for fine cutting in a wide range of materials. Precise, clean cuts can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. The conical ground teeth ensure fine cuts even in delicate…

    $10.00
  12. Festool Jigsaw Blades S 145/4 FSG, 5-Pack

    Festool Jigsaw Blades S 145/4 FSG, 5-Pack

    …The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that…

    0 Review(s)
    $25.00
  13. Festool Jigsaw Blades S 50/1.4 K, 5-Pack

    Festool Jigsaw Blades S 50/1.4 K, 5-Pack

    The S 50/1.4 K jigsaw blade is an excellent blade for scroll-cutting and making tight curves in a wide range of materials. Achieve very good results in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE, hard plastics, Plexiglas, acrylics and similar materials. The…

    $10.00
  14. Freud® LU84R Industrial Combination Saw Blades

    Freud® LU84R Industrial Combination Saw Blades

    …of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically…

    5 Review(s)
    From: $71.47
  15. Freud® LU84M Industrial Combination Saw Blades

    Freud® LU84M Industrial Combination Saw Blades

    …of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically…

    From: $61.97
  16. Freud® LU81M Industrial Heavy Duty Stacked Chipboard Saw Blades

    Freud® LU81M Industrial Heavy Duty Stacked Chipboard Saw Blades

    This blade is ideal for sizing sheet goods (chipboard, plywood, laminates, MDF) where speed is more important than a smooth finish or when cutting stacks of material. These blades are best used when cutting plywood and composition material, but they can also be used with hardwood and softwood. The…

    $67.97 From: $69.99
  17. Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    …veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!

    2 Review(s)
    From: $90.47
  18. Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    …veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needeed with this blade!

    1 Review(s)
    From: $65.97
  19. SD506 Freud Dado Set

    SD506 Freud Dado Set

    …everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized plywood. This allows the cut…

    5 Review(s)
    $183.47
  20. SD508 Freud Dado Set

    SD508 Freud Dado Set

    …everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized plywood. This allows the cut…

    6 Review(s)
    $199.97
  21. High Performance and Crown Scroll Saw Blades-High Performance

    High Performance and Crown Scroll Saw Blades-High Performance

    …Performance "Skip Tooth/Reverse " PGT- Cuts through plywood and softwoods with minimal burning or underside tear out. Razor sharp teeth cut faster with greater accuracy on both straight and radius cuts. Consistently smooth, sand free. 6 blades per pack. Crown Tooth- Excellent for cutting plastics,…

    1 Review(s)
    From: $5.29
  22. High Performance and Crown Scroll Saw Blades-Skip Tooth reverse  PGT

    High Performance and Crown Scroll Saw Blades-Skip Tooth reverse PGT

    …Performance "Skip Tooth/Reverse " PGT- Cuts through plywood and softwoods with minimal burning or underside tear out. Razor sharp teeth cut faster with greater accuracy on both straight and radius cuts. Consistently smooth, sand free. 6 blades per pack. Crown Tooth- Excellent for cutting plastics,…

    $7.39
  23. Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

    Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

    …scroll saw blades for extra-fine cuts in hard or soft wood, as well asplastic. Capable of cutting materials from 3/32-inch to 1/2-inch thick, and of cuttingradiuses as small as 1/8-inch. Fine spring steel. Sold in packs of six. Technical Details:* Excellent for hardwoods, softwoods, plywood, plastic…

    $5.79
  24. Olson® 5-inch Pin End General-Purpose Scroll Saw Blades, 6-Pack

    Olson® 5-inch Pin End General-Purpose Scroll Saw Blades, 6-Pack

    …saw blades for medium-smooth cuts in hard or softwood, as well as plastic. Capable of cutting materials from 3/16-inch to 1/2-inch thick,and of cutting radiuses as small as 5/32-inch. Fine spring steel. Sold in packs of six Technical Details:* Excellent for hardwoods, softwoods, plywood, plastic…

    $4.69
  • Items 1 - 24 of 35
  • Page:
    1. 1
    2. 2
Feedback X