Plywood Edging

  • Items 1 - 24 of 107
  • Page:
    1. 1
    2. 2
    3. 3
  1. Plastic T-Molding Edging-3/4" Wide x 12' Long

    Plastic T-Molding Edging-3/4" Wide x 12' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $17.99
  2. Hot-Melt Edge Bandings   25' Rolls

    Hot-Melt Edge Bandings 25' Rolls

    …is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated…

    From: $7.99
  3. Plastic T-Molding Edging-3/4" Wide x 100' Long

    Plastic T-Molding Edging-3/4" Wide x 100' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $43.99
  4. 1-9/16" Plyedge® Real Wood Edging

    1-9/16" Plyedge® Real Wood Edging

    If you can iron you can apply Plyedge®! Just position edge banding and heat with either our hand held iron or edge banding machine. This item backing creates a permanent bond. Then simply cut and trim edging to make plywood look like solid stock.

    2 Review(s)
    From: $7.99
  5. Double Edge Trimmer

    Double Edge Trimmer

    Simply squeeze to cleanly trim both edges flush with plywood faces. Trimmer houses four blades that cut flush with the edges and four blades that cut at a 45° bevel angle that are held in a spring-loaded mechanism that you simply squeeze until flush with the edges of your material. Full closed…

    31 Review(s)
    $22.99
  6. Drawer Sides-Select Size

    Drawer Sides-Select Size

    Our solid birch veneer plywood drawer sides are ready-made, for fast drawer assembly.* Size is 1/2" thick and have a 1/4" dado for the drawer bottom located 1/4" from the bottom edge.* Simply cut to length and assemble with your drawer front.* Available in 4 foot lengths.* Sizes listed are width.…

    12 Review(s)
    From: $6.99
  7. PSA - Pressure Sensitive Veneer - 24 Inch X 96 Inch

    PSA - Pressure Sensitive Veneer - 24 Inch X 96 Inch

    …and metal* Not recommended for use on fir plywood Refacing tips: First, apply veneer to the end panels. Once you're ready for thefaceframes, start with the stiles (vertical members). Cut veneer slightly wider thanstile (leaving an overlap), and line up edge with top of the stile. Peel off backing…

    55 Review(s)
    From: $83.99
  8. Baltic Birch Plywood-24 Inch X 48 Inch

    Baltic Birch Plywood-24 Inch X 48 Inch

    …Russia, and are of a quality BB/BB grade with a void-free finished edge. Both sides may include matched face plugs. Nominal sizes. * Ideal for cabinets, drawer sides and craft projects.* Also known as Russian Birch Plywood.* Front, back and inner plies are all quality one-piece plies.* Highly…

    From: $12.99
  9. Custom Drawers - Now with Dovetail Joints!

    Custom Drawers - Now with Dovetail Joints!

    …address! Our dovetail drawers are available in four species of solid wood (Red Oak, White Oak, White Maple and Beech), as well as Baltic Birch plywood. Drawers include the front, back, sides and bottom of a basic drawer box. You supply the decorative drawer front to match your cabinetry. Drawers…

    6 Review(s)
  10. Plastic T-Molding Edging-13/16" W x 12' Long

    Plastic T-Molding Edging-13/16" W x 12' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $15.49
  11. Hot-Melt Edge Bandings   50' Rolls

    Hot-Melt Edge Bandings 50' Rolls

    …is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated…

    From: $13.49
  12. 24'' x 48'' Maple Plywood

    24'' x 48'' Maple Plywood

    These maple plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in maple. All panels measure 24"W x 48"L, and…

    From: $19.99
  13. Full Wrap Around Slotted Piano Hinges

    Full Wrap Around Slotted Piano Hinges

    Provides maximum strength and stability. Hinges are adjustable without starting over. Ideal for plywood applications. Wrap around design lets you screw into the face rather than the edge for better strength. Use on 3/4" material. 48" lengths. Screws are included as well as slots for final fitting.

    6 Review(s)
    From: $31.99
  14. 24'' x 48'' Walnut Plywood

    24'' x 48'' Walnut Plywood

    These walnut plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in walnut. All panels measure 24"W x 48"L,…

    0 Review(s)
    From: $29.99
  15. Hot-Melt Edge Bandings   250' Rolls

    Hot-Melt Edge Bandings 250' Rolls

    …is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated…

    2 Review(s)
    From: $30.99
  16. Plastic T-Molding Edging-13/16" Wide x 100' Long

    Plastic T-Molding Edging-13/16" Wide x 100' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $47.99
  17. Light Brown Phenolic Faced Plywood Sheets

    Light Brown Phenolic Faced Plywood Sheets

    …100% Birch plywood features hard and smooth Birch face veneers with phenolic resin thermally fused into both panel sides. The net effect is an ultra-stable, low-friction and waterproof surface with practical uses all over the shop. The virtually voidless core eliminates the need for edge banding.…

    5 Review(s)
    $24.99
  18. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    …perfect for plywood that is thinner than the nominal thickness, and for lumber that's been planed toan odd size. Operation is simple! Once you've set your thickness with the scale and knurled knobs, just run the first shoulder of the dado with one edge of the jig up against any straight edge, then…

    1 Review(s)
    $44.99 $32.99

    SAVE 27%

  19. Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    …and letting in back panels.* Produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.47
  20. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    …anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes…

    5 Review(s)
    From: $52.47
  21. Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    …life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically…

    2 Review(s)
    From: $90.47
  22. Freud® 38-104 Quadra-Cut™ Roman Ogee Router Bit - 1-1/16" Dia x 1/2" H x 1/2" Shank

    Freud® 38-104 Quadra-Cut™ Roman Ogee Router Bit - 1-1/16" Dia x 1/2" H x 1/2" Shank

    …any fuzzing or chipping along the edges. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Perfect for decorative edging on cabinets, furniture, plaques, and millwork.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held…

    6 Review(s)
    $45.97
  23. Stanley® Sweetheart No. 92 Premium Shoulder Plane

    Stanley® Sweetheart No. 92 Premium Shoulder Plane

    …change, you're ready to use it as a chisel plane for cleaning up glue joints, trimming 90° inside corners on casework, trimming the edge banding off plywood or trimming screw plugs, tenons or dowels flush. Woodworking enthusiasts will also appreciate its mechanical precision with its durable…

    $109.99
  24. Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    …smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications: Soften furniture edges and create decorative rounded edges.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and…

    11 Review(s)
    From: $35.97
  • Items 1 - 24 of 107
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X