Power Plane

  • Items 1 - 24 of 58
  • Page:
    1. 1
    2. 2
    3. 3
  1. Festool HL 850 E Planer with New T-Loc Systainer

    Festool HL 850 E Planer with New T-Loc Systainer

    …all here. Save 10% off the purchase of a Dust Extractor when combining your purchase with a Select Festool Power Tool. Choose from the CT Mini, CT Midi, CT 26 or the CT 36. Details:* Power consumption: 850 watts/7amp,120v AC* Drive shaft speed: 10,000 rpm.* Cutting depth: 0-9/64" (0-3.5mm)* Rebating…

    1 Review(s)
    $615.00
  2. Work Sharp™ WS3000 Tool Sharpener

    Work Sharp™ WS3000 Tool Sharpener

    …enables you to select desired bevel angle and sharpen precise, repeatable angles of 20°, 25°, 30° and 35° for chisels and plane irons up to 2" wide. * Powerful 1/5 HP motor with 580 RPM wheel speed.* Sharpening port lapping surface features "plunge-pull" sharpening technique.* Sharpening…

    53 Review(s)
    $199.99
  3. Jet® 8'' Bench Top Jointer/Planer Combo

    Jet® 8'' Bench Top Jointer/Planer Combo

    …Combo is right for you. This powerhouse has features usually only found on big floor models. Precision adjustment knobs, compact design, and a powerful 13 Amp motor are only a few features that make this jointer/planer the right choice for wherever you may need it. * Combination bench top jointer…

    2 Review(s)
    $374.99
  4. Jet® 10'' Jointer/Planer Combo w/Open Stand

    Jet® 10'' Jointer/Planer Combo w/Open Stand

    Looking for a powerful jointer and planer in your shop or on the go? Look no further than the new JET® B3NCH 10" Benchtop Jointer/Planer Combo. This powerhouse gives you the 1-2 punch of features usually only found on big floor models. Precision adjustment knobs, a telescoping blade guard, and a…

    5 Review(s)
    $499.99
  5. Jet® 12'' Planer/Jointer Combo

    Jet® 12'' Planer/Jointer Combo

    planing functions. Fence does not need to be removed* Powerful 3HP induction motor easily handles the toughest jointing and planing tasks* Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability* Built-in dust chute with 4" dust port used for both jointing and planing

    $2244.99
  6. Jet® 16'' Planer w/Open Stand

    Jet® 16'' Planer w/Open Stand

    …iron, precision ground table for precise workpiece support* Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power* Surge infeed and outfeed rollers give your workpiece maximum support during planing operations* Two-speed gear box lets you adjust the feed…

    $1529.99
  7. Leather Power Strop

    Leather Power Strop

    Get the edge! Use the leather power strop after stone sharpening tools to remove wire edge. Perfect for honing plane blades, draw and other knives, and carving gouges, too. Leaves cutting tools razor sharp! Fits 1/2" arbor.

    2 Review(s)
    $36.99
  8. SandFlex Flexible Abrasive Blocks

    SandFlex Flexible Abrasive Blocks

    …even be carved and shaped to match contours such as for moldings or for turned bowls. They are ideal for polishing your cast iron power tool tables, chisels and plane blades, and they make incredibly quick work of shining up a stainless steel sink! Technical Details:* Made of a solid, semi-flexible…

    1 Review(s)
    $7.99
  9. Powermatic® 20'' Planer 5HP 1PH w/Byrd SHELIX Cutterhead

    Powermatic® 20'' Planer 5HP 1PH w/Byrd SHELIX Cutterhead

    This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional…

    $4284.99
  10. Powermatic® 20'' Planer 5HP 3PH w/Byrd SHELIX Cutterhead

    Powermatic® 20'' Planer 5HP 3PH w/Byrd SHELIX Cutterhead

    This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional…

    $4284.99
  11. Powermatic® 20'' Planer 5HP 1PH

    Powermatic® 20'' Planer 5HP 1PH

    This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The 5" dust port connects easily to any dust collector. The cutterhead has four high speed…

    $2854.99
  12. Powermatic® 20'' Planer 5HP 3PH

    Powermatic® 20'' Planer 5HP 3PH

    This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The 5" dust port connects easily to any dust collector. The cutterhead has four high speed…

    $2839.99
  13. Jet® 12'' Planer/Jointer Combo w/Helical Head

    Jet® 12'' Planer/Jointer Combo w/Helical Head

    …controls for quick adjustments * Extremely quick changeover between jointing and planing functions. Fence does not need to be removed * Powerful 3HP induction motor easily handles the toughest jointing and planing tasks * Heavy-duty, one-piece steel closed stand includes mounting tabs for increased…

    1 Review(s)
    $3364.99
  14. Back Cutter Router Bit

    Back Cutter Router Bit

    …frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The same goes for raised panels. Instead of planing off the back side, you can leave the panel at 3/4" thick and use the…

    0 Review(s)
    $44.99
  15. Freud Reversible Glue Joint Bit

    Freud Reversible Glue Joint Bit

    …Not only does it maintain perfectly flush alignment, which minimizes subsequent planing and sanding, but it also increases the amount of surface area for glue, resulting in a stronger joint. To use, simply plane boards to a uniform thickness; align bit to the center of the board, then reverse…

    1 Review(s)
    $73.47
  16. Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.

    Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.

    …plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a long useful life.* Cuts all composition materials, plywoods,…

    $34.97
  17. Ebony Turning Blanks

    Ebony Turning Blanks

    …reaction. * Working Properties: Ebony is extremely hard, and the heartwood is difficult to machine with both hand and power tools. Dulls tools quickly. May tear out while planing if grain is irregular.* Polish: Takes an excellent polish.* Steam-bending properties: Good. * Natural Durability:…

    5 Review(s)
    From: $7.99
  18. Freud 97-158, 3-Piece Door Set

    Freud 97-158, 3-Piece Door Set

    …Quadra-Cut bit, which features four cutters specially configured for incredibly smooth cuts. With the included relief cutter, you won't have to plane your panel stock to 5/8", saving labor and wear and tear on your tools.* High-density carbide composition.* Perma-Shield® coating lengthens bit…

    1 Review(s)
    $195.97
  19. Micro-Mesh™ Cushioned Abrasives

    Micro-Mesh™ Cushioned Abrasives

    …fine grit cushioned abrasives. With a flexible cloth back and resilient inner layer, micron-graded silicone carbide crystals recede to an even planing level as they establish each successively finer scratch pattern. Available in 5" disk assortment pack with hook-and-loop design and 3" x 4"…

    From: $26.29
  20. Jet® 13'' Planer/Molder with Closed Stand

    Jet® 13'' Planer/Molder with Closed Stand

    …Maximum Planing Width: 13"* Maximum Planing Thickness: 6-1/8"* Minimum Planing Length: 14"* Cutterhead Speed: 4500 RPM* Cutterhead Diameter: 2-9/16"* Cuts Per Minute: 13500* Feed Rate - Planing: 20 FPM* Feed Rate - Molding: 10 FPM* Number of Knives: 3* Dust Port Diameter: 4"* Motor Power: 1-1/2 HP*…

    1 Review(s)
    $1119.99
  21. Powermatic 201 Planer, 7.5HP 1PH 230V

    Powermatic 201 Planer, 7.5HP 1PH 230V

    …Depth of Cut (in.):3/16* Maximum Full Width Depth of Cut (in.):n.a.* Maximum Opening (in.):n.a.* Maximum Planing Thickness (in.):9-1/4* Maximum Planing Width (in.):22* Minimum Planing Length (in.):10* Model Number:201* Motor HP:7-1/2HP* Motor Phase:1Ph* Motor Voltage:230V* Movement - Horizontal…

    $6259.99
  22. Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    …The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels down to 5/8", saving wear and tear on your machinery. Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for…

    4 Review(s)
    $119.97
  23. Dewalt D26441K Heavy-Duty 1/4 Sheet Palm Grip Sander Kit

    Dewalt D26441K Heavy-Duty 1/4 Sheet Palm Grip Sander Kit

    …control during use* Dust sealed switch for increased durability* Sealed 100% ball-bearing construction provides longer life* High capacity dust bag with built in vacuum adapter provides maximum dust collection with or without vacuum* Dual plane counter-balanced low-vibration design reduces fatigue

    $49.00
  24. 8'' Wixey™ Digital Protractor

    8'' Wixey™ Digital Protractor

    …convenient, the Wixey™ Digital Protractor measures angles in any plane with 0.1° resolution, accuracy, and repeatability. And with magnets embedded in every edge of the protractor, it's especially handy for cast iron power tools such as table saws, band saws, jointers and more-simply set…

    34 Review(s)
    $63.99
  • Items 1 - 24 of 58
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X