Profile Router Bit

  • Items 1 - 24 of 142
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Restoration Beading Router Bits, 1/2" Shank

    Rockler Restoration Beading Router Bits, 1/2" Shank

    …smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In bullnosing applications, a beading bit gives you a true half-round profile, without…

    2 Review(s)
    From: $26.99
  2. Miniature Classic Router Bit

    Miniature Classic Router Bit

    You can use this unique bit for cutting decorative flutes or routing letters on signs. With its wave-shaped profile, you'll get a more ornate look than with typical router bits. Alternatively, the bit can be used in the router table to apply an ogee-like edge to table tops and other parts. Scaled…

    $19.99
  3. Classic Cove Router Bits-1/2" Shank

    Classic Cove Router Bits-1/2" Shank

    Our Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy…

    0 Review(s)
    From: $39.99
  4. Specialty Molding Router Bit 1-3/8" Diameter x 1-5/8" High x 1/2" Shank

    Specialty Molding Router Bit 1-3/8" Diameter x 1-5/8" High x 1/2" Shank

    …furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of it to achieve the look you want. Features two flutes and a…

    1 Review(s)
    $69.99
  5. Freud Ogee Router Bits

    Freud Ogee Router Bits

    …a distinctive edge profile to cabinets, furniture, plaques, and millwork with these decorative ogee edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™…

    From: $40.47
  6. Rockler Bead & Cove Bits for Canoe Building

    Rockler Bead & Cove Bits for Canoe Building

    …just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile. Dimensions listed are radiuses.…

    4 Review(s)
    From: $49.99
  7. Raised Panel Router Bit - Ogee - Horizontal

    Raised Panel Router Bit - Ogee - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    2 Review(s)
    From: $64.99
  8. Rockler Ogee Reversible Rail & Stile Bit

    Rockler Ogee Reversible Rail & Stile Bit

    …cope the ends of the rails, run stock face up on table. Stack the bit (starting from the shank end) as follows: straight cutter, bearing, then profile cutter.* IMPORTANT SAFETY NOTE: Do not invert any of the cutters! Be sure the carbide is facing the right direction for the rotation of the router.

    2 Review(s)
    $69.99
  9. Raised Panel Router Bit - Straight - Horizontal

    Raised Panel Router Bit - Straight - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors.…

    4 Review(s)
    From: $64.99
  10. Freud Cove and Bead Groove Bits

    Freud Cove and Bead Groove Bits

    This bit can be used to create ornamental edge profiles and decorative grooves in molding and furniture. For edge profiles, use it with an edge guide or router table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    $38.47
  11. Decorative Ogee Bit OE869

    Decorative Ogee Bit OE869

    …Decorative Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    1 Review(s)
    $54.99
  12. Classic Roman Ogee Router Bits-1/4" Shank

    Classic Roman Ogee Router Bits-1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  13. Classic Ogee Router Bits-1/2 Inch Shank

    Classic Ogee Router Bits-1/2 Inch Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks—the best choice for the smoothest cut and…

    From: $32.99
  14. Freud Quadra-Cut Classical Ogee & Round Bit

    Freud Quadra-Cut Classical Ogee & Round Bit

    …primary profile, while the two smaller downshear cutters clean up any fuzzing or chipping that might remain along the edges. The result is an absolutely flawless cut that requires no sanding.* Add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits.*

    3 Review(s)
    $55.47
  15. 3/8' and 1/2' Radius Double Cutter Router Bit

    3/8' and 1/2' Radius Double Cutter Router Bit

    …can even cut a board with one radius on the top and the other radius on the bottom! Works well for decking and outdoor furniture such as Adirondack chairs. Bits are also adjustable to accommodate stock thicknesses from 1" to 1-3/4". 1/2" shank. Bits should be used on a router table at reduced RPM.

    $95.39
  16. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    …you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step. Of course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and…

    4 Review(s)
    From: $34.99
  17. Twin Step Ogee Bit OE833

    Twin Step Ogee Bit OE833

    …Twin Step Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and is silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $44.99
  18. Freud  Cove Router Bit 30-114

    Freud Cove Router Bit 30-114

    …cove profiles with this cove bit from Freud! Bit features a shear angle that effortlessly slices through wood in much the same way a craftsman would with a hand plane. Cuts all composition materials: plywoods, hardwoods, and softwoods. Use on hand-held or table-mounted portable routers. The 1/2"…

    $36.97
  19. 1/4''Miniature Roundover Router Bit

    1/4''Miniature Roundover Router Bit

    With its undersized 8mm bearing, this 1/4" round over bit dips nimbly in and out of corners, virtually eliminating the widely arcing, shallow-cut corners that would result from an ordinary bit with a standard sized bearing. Perfect for profiling smaller scale projects like jewelry boxes, music boxes…

    $19.99
  20. Round Over/Beading Bit Set - 1/4" Shank

    Round Over/Beading Bit Set - 1/4" Shank

    Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes…

    $79.99
  21. Dado Jig for Low Profile Straight Edge Clamp System

    Dado Jig for Low Profile Straight Edge Clamp System

    …to fit in the channel of our Low Profile Straight Edge Clamp System ensuring the jig does not wander from the straight edge. Perfect cuts every time! Technical Details:* The Rockler Dado Jig is designed to be used with a 1/2" straight bit.* Any straight bit can be used, but the user will have…

    1 Review(s)
    $44.99
  22. DeWalt DWP611PK Compact Router

    DeWalt DWP611PK Compact Router

    …and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.

    3 Review(s)
    $199.00
  23. Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    …depth setting* Up to 1.5" of depth travel with standard base and 2" with plunge base* Extended 8-Slot 1/4" Collet Maximizes Surface Contact with Router Bit Shank for a Tighter Grip* Fixed & Plunge Base Combo Kit; Large Plunge Base Platform Provides Added Stability for Heavier Applications & Sub-Base…

    $189.00
  24. Freud Quadra-Cut™ Ogee Table Edge & Handrail Bits

    Freud Quadra-Cut™ Ogee Table Edge & Handrail Bits

    …to hog out the profile, while two smaller cutters shear downwards to eliminate any chipping or fuzzing along the edges. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. The profile can be easily combined with our Handrail Router Bit (91708, sold…

    1 Review(s)
    $88.97 $66.72

    SAVE 25%

  • Items 1 - 24 of 142
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X