Protractor Square

  • Items 1 - 24 of 72
  • Page:
    1. 1
    2. 2
    3. 3
  1. Oshlun 12'' Combination Square, 3 Piece Set

    Oshlun 12'' Combination Square, 3 Piece Set

    square set features a slotted and etched stainless steel blade with 1/8", 1/16", 1/32" and 1/64" scales and includes a square head with 45° shoulder, center head and a protractor head with a double 180°protractor scale (all with reversible lock bolts). It also features a miter square, depth…

    4 Review(s)
    $69.99
  2. Blue Right™ Woodworker's Protractor

    Blue Right™ Woodworker's Protractor

    protractor* Acrylic with a phenolic fence* Make accurate measurements or project angles* Use the fence to square the protractor flush against your work* Use it as a traditional protractor with the fence removed* High-visibility numbers on the inner and outer scales* The flat edge of the protractor

    $24.99
  3. Starrett Protractor Angle Finder

    Starrett Protractor Angle Finder

    Takes error-prone calculations out of the process of miter cuts, providing a perfect miter every time.* With two scales.* Aluminum.

    $89.99
  4. Bevel Setting Protractor

    Bevel Setting Protractor

    This handy tool is like a bevel gauge with the addition of a protractor scale - essential for when you need to hit a specific angle. Use it to transfer angles from a pattern to your saw or jointer, or as a marking gauge. It's graduated from 0° to 180° in both directions so you can quickly…

    1 Review(s)
    $18.99
  5. 8'' Wixey™ Digital Protractor

    8'' Wixey™ Digital Protractor

    Protractor will bring your woodworking to the twenty-first century. Technical Details: * Digital protractor has a large display to eliminate the reading errors common in analog protractors.* Tightening mechanism holds measurements for later transfer when used as a digital angle finder.* Protractor

    34 Review(s)
    $63.99
  6. INCRA Precision Protractor

    INCRA Precision Protractor

    We've reinvented the protractor by putting micro-fine guide holes at every 45o, 30o, 22.5o, 5o, 1o and 0.5o interval to plot any angle with ease and absolute accuracy.

    1 Review(s)
    $32.99
  7. Wixey 3'' Digital Protractor

    Wixey 3'' Digital Protractor

    …and bevel angles. And with magnets on every blade edge, it's especially easy to use on metal. It also features a convenient tightening mechanism for holding measurements. Protractor shuts off automatically for an extended battery life.* Uses a 3.0V CR2032 battery* Protractor range: +/- 180 degrees

    5 Review(s)
    $52.99
  8. Round Top Protractor #19

    Round Top Protractor #19

    This durable angle gauge features a hard-chrome, half-round head with right- andleft-reading scales to 180°. Its pivoting arm moves smoothly and extends roughly sixinches from the head. Additional features:* Great for angle-reading * Ideal for scribing* Durable knurled lock-nut secures the blade…

    $15.99
  9. 18'' True Angle® Protractor

    18'' True Angle® Protractor

    …and trim, and is the ideal measuring tool for our Compound Miter Jig (#67626). Ideal for Crown Molding!* 360° adjustable protractor/bevel square has pivoting straight edges so it accurately duplicates or measures any angle with just a turn of the dial.* Ideal for measuring, layout or reproducing…

    2 Review(s)
    $20.99
  10. Starrett 12'' Combination Square, with Square Head

    Starrett 12'' Combination Square, with Square Head

    Laroy Starrett invented the combination square in 1877 and it has become a basic tool for every craftsman and builder. The C11H series has a cast iron head with a handy spirit level and a hardened scriber. The blade is machine divided, hardened and tempered with a reversible lock bolt that allows…

    9 Review(s)
    $102.99
  11. Starrett® 6'' Combination Square with Square Head

    Starrett® 6'' Combination Square with Square Head

    The combination square is one of the world's most practical and versatile tool inventions - the basic tool for every builder and craftsman. Features try/miter gauge, depth gauge, height gauge and marking gauge - all in one! With reversible lock bolt, scriber, spirit level and machine-divided blade…

    7 Review(s)
    $92.99
  12. Starrett 7" ProSite Protractor - Durable Aluminum

    Starrett 7" ProSite Protractor - Durable Aluminum

    Takes error-prone calculations out of the process of miter cuts to ensure perfect miter joints every time!* Simply set your miter saw to the angle that you read. Upside down or backwards, the reading is always correct. Easy-to-use tool has two scales: red scale and arrow show the angle for a miter…

    4 Review(s)
    $69.99
  13. iGaging 8" Digital Angle Protractor (35-408)

    iGaging 8" Digital Angle Protractor (35-408)

    …degree! Mark miters, check 90°corners and more. Two overlapping steel blades feature inch and millimeter markings to1/16" and 0.1mm. Digital protractor device measures the angle between the blades asthey are slid apart. Measures entire 360° range and is accurate to +/-0.2°. Holding…

    7 Review(s)
    $41.99
  14. Starrett 7" ProSite Protractor - Engineered Plastic

    Starrett 7" ProSite Protractor - Engineered Plastic

    Takes error-prone calculations out of the process of miter cuts to ensure perfect miter joints every time! Simply set your miter saw to the angle that you read. Upside down or backwards, the reading is always correct. Easy-to-use tool has two scales: red scale and arrow show the angle for a miter…

    1 Review(s)
    $29.99
  15. 4'' Steel Engineer Square

    4'' Steel Engineer Square

    This 4" steel engineer square is perfect for setting up machinery, marking stock for joints or checking stock for squareness.

    4 Review(s)
    $15.99
  16. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  17. 3-Piece Engineer Square Set

    3-Piece Engineer Square Set

    …handy set is great for setting up and checking machines and projects for extreme accuracy to 0.00063".* Includes 2", 4" and 6" precision steel squares.* Hardened spring steel blades are permanently fixed to the stock with tapered self-locking rivets for complete rigidity.* Working edges of the…

    21 Review(s)
    $49.99
  18. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …fixed head with a comfortable ergonomic handle and a moveable tailpiece. Sold Separately Find the right Clamp-It® for every project! Also available from Rockler: * Clamp-It® Mini Assembly Square* Clamp-It® Adjustable Assembly Square* Clamp-It® Assembly Square w/Universal Fence Clamps

    110 Review(s)
    $12.99
  19. iGaging 12'' Combination Square

    iGaging 12'' Combination Square

    …Satin chrome finish blade* Graduated in 8ths, 16ths, 32nds and 64ths* Square/miter head features a level vial and a hardened scribe tool* Blade straightness/parallelism 0.0006"/12"* End squareness +/- 0.03°/90°* Square head squareness 0.005"/12"* Miter squareness: 0.005"/12" One Storage Case

    5 Review(s)
    $29.99
  20. 4'' Mini Try Square

    4'' Mini Try Square

    The must-have tool for laying out precise 90° angles, checking internal angles, marking stock or using as a guide for mortising.* Rosewood handle with 4-3/8" hardened steel blade.* Triple rivets ensure constant accuracy.

    1 Review(s)
    $24.99
  21. 6" Engineer Square

    6" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $22.99
  22. 4" Engineer Square

    4" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $12.99
  23. 10'' Sliding T-Bevel Square

    10'' Sliding T-Bevel Square

    Metal blade pivots and can be locked at any angle.

    $20.99
  24. Magnetic Lock Combination Square

    Magnetic Lock Combination Square

    Six rare earth magnets hold the ruler in place instead of a clumsy screw lock. Body slides quickly and easily along the ruler through the magnetic lock. Heavy-duty cast zinc body is milled on all five sides for superior accuracy. 12" ruler is etched with markings to 1/16" and 1mm. Features onboard…

    3 Review(s)
    $20.99
  • Items 1 - 24 of 72
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X