Pull Knife

  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
  1. Edge Banding Machine

    Edge Banding Machine

    …dial allow use of a wider variety of edge-banding materials.* Light, durable construction and adjustable, non-skid rubber feet. * Built-in cut-off knife has a palm-strike knob. * All fences and guides adjust using the same Allen wrench. * Laminate-covered table is 27" by 7-1/2". * Maximum material…

    12 Review(s)
    $319.99
  2. Tormek® Small Knife Sharpening Jig

    Tormek® Small Knife Sharpening Jig

    …size swiss army knife with ease. Technical Details:* Works with the the SVM-45 Knife Jig and the T-7 Sharpener (60533 and 35254, both required, sold separately).* The holder is designed to securely hold the knife without damaging the handle.* The Tormek® Small Knife Sharpening Jig consists…

    $33.00
  3. Flexcut® Hook Knives

    Flexcut® Hook Knives

    …knives remove stock quickly and smoothly and are great for working in hollows. The handedness (right or left) is designated by pulling the tool toward you. * Each knife is constructed with an ash handle and a high carbon steel blade. * The high carbon blade holds an edge extremely well and is easily…

    $28.99
  4. Work Sharp Knife and Tool Sharpener, WSKTS

    Work Sharp Knife and Tool Sharpener, WSKTS

    Sharpen any knife and a wide variety of tools with this highly portable power belt sharpener. Won't burn or damage blade steel. Package includes the Work Sharp power platform, belt sharpening module, kitchen knife guide with 40° total angle, outdoor knife guide with 50° total angle and…

    15 Review(s)
    $69.95
  5. Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    …towards the edge. The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $56.00
  6. Solid Brass and Chrome Desk Clock Kit

    Solid Brass and Chrome Desk Clock Kit

    …screws. Create your own wood base. Pen Holder sold separately. To replace the battery:* 1.Slide the tip of a utility kife or other thin bladed knife between the edge of the clock face bezel and the brass housing. CAUTION: Be careful not to scratch the case surface with the blade.* 2.With a slight…

    6 Review(s)
    $18.99
  7. One Board Woodworking Projects, Book

    One Board Woodworking Projects, Book

    …stylish bookends, a personalized laptop tray, toy rocking chair, an elegant wine rack, a knife block, and even functional closet shelving that would ordinarily cost hundreds of dollars. So grab a board of wood, pull up to the bench with this book, and see how easy it is to create something beautiful…

    $21.95
  8. Jet® 8'' Jointer w/Closed Stand

    Jet® 8'' Jointer w/Closed Stand

    …Motor Power: 2 HP* Motor Phase: 1 Ph* Motor Voltage: 230 V* Prewired Voltage: 230 V* Motor Current: 12 A Standard Equipment* Magnetic controls* Tilting fence* Front and rear safety knife guards* Three high-speed steel knives* Rigid one piece stand* Knife setting gauge* 4" dust chute and hood

    2 Review(s)
    $1,429.99
  9. Storage Tray/App Holder for Hafele SmartCab™

    Storage Tray/App Holder for Hafele SmartCab™

    …storage system(44109, sold separately). The trays can be used alone to store a variety of items, or as "app holders" to hold cutting boards, knife blocks, flatware trays, spice racks and roll managers (for plastic wrap, aluminum foil etc). The app holders are available in full-depth and half-depth…

    From: $29.99
  10. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    …be enhanced with a wide variety of modular accessories or "Apps" depending on your storage needs. Accessories include cutting boards, knife blocks, flatware trays, spice racks, and two types of side caddys. The Apps are available in full- or half-depth versions, and fit into App Holders…

    $219.99
  11. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …Cover (MH-380), a Multi-Jig (SVS-50) for skew chisels with a straight or curved edges, and a book and DVD. The Handtool kit includes a knife jig, long knife jig, scissors jig, short tool jig, and an axe jig. T-7 Sharpening System Details:* Square Edge Jig accepts blades up to 76mm or 3" in width*…

    $1,315.00
  12. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …Cover (MH-380), a Multi-Jig (SVS-50) for skew chisels with a straight or curved edges, and a book and DVD. The Handtool kit includes a knife jig, long knife jig, scissors jig, short tool jig, and an axe jig. T-7 Sharpening System Details:* Square Edge Jig accepts blades up to 76mm or 3" in width*…

    $1,149.00
  13. Powermatic® 8'' Parallelogram Jointer

    Powermatic® 8'' Parallelogram Jointer

    …8" x 1/2"* Cutterhead Speed: 7000 RPM* Cuts Per Minute: 21000* Cutterhead Diameter: 3-1/16"* Number of Knives: 3* (Helical/Standard): * Standard Knife Size (L x W x T): 8" x 11/16" x 1/8"* Rabbeting Capacity: 1/2"* Table Height: 31-5/16"* Table Size (L x W): 82" x 8"* Infeed Table Length: 44"*…

    2 Review(s)
    $2,244.99
  14. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …customers, including industrial users Handtool Sharpening Kit Details:* The Knife Jig works to sharpen most knives, including carver's draw knives. Long knives need to be stiff, and the minimum blade length is 60 mm* The Long Knife Jig is suitable for long and flexible knives. The jig's 140 mm width…

    $849.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
Feedback X