Quickchange Chuck

  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
  • Products (25)
  1. Festool Centrotec® Chuck

    Festool Centrotec® Chuck

    chuck and decrease necessary drilling/driving clearance with the compact design. Save time changing between drill and screw bits with the quick-change Centrotec System. Accessory Centrotec bits can be used both with the Centrotec chuck as well as non-Festool standard bit holders and chucks. Works…

    $35.00
  2. Rockler Insty-Drive Quick-Change Chuck

    Rockler Insty-Drive Quick-Change Chuck

    The 3/8" shank chuck includes a quick-release sleeve and accepts all 1/4" hex shank bits and drivers. NOTE: Not designed for use with impact drivers. * 1/4" Professional Quick Change Chuck * Accepts all 1/4" (6mm) quick change hex shank accessories * Quick, easy changeout of accessories * True…

    $16.99
  3. 1/4'' Collet Reducer for Musclechuck™ Quick-Change Router Chuck

    1/4'' Collet Reducer for Musclechuck™ Quick-Change Router Chuck

    This collet reducer slips into the Musclechuck™ (47222, sold separately) to accommodate router bits with a 1/4" shank. The Musclechuck accepts 1/2" shank router bits without any reducer. Technical Details:* Use with the Musclechuck (47222, sold separately) to accommodate 1/4" shank router…

    $33.49
  4. Kreg Quick-Change Pocket Hole Bit

    Kreg Quick-Change Pocket Hole Bit

    …Kreg's innovative Quick-Change Chuck (also works with standard chucks). Specifically designed for pocket hole drilling, with a pilot tip and a durable, one-piece design. Additional features:* Hex-shank allows for use with Kreg's Quick-Change Chuck.* Also works with standard chucks.* 3/8" diameter,…

    $17.99
  5. Quick-Change Musclechuck™

    Quick-Change Musclechuck™

    …that, but the extra reach afforded by the Musclechuck allows you to perform above-table router bit changes in seconds. Unlike many other quick-change router chucks, this one doesn't rely on a cam, so it won't damage the router bit shank, and there's n orisk of loosening over time. Available in two…

    2 Review(s)
    $69.99
  6. Kreg Quick-Change Pocket Hole Bit Adaper

    Kreg Quick-Change Pocket Hole Bit Adaper

    This solid, forged-steel adapter adds quick-change compatibility to Kreg's standardround-shanked 3/8" diameter pocket-hole bits. Two Allen screws secure the bit,while a hex-shaped shank allows for rapid transitions in quick-change chucks. Additional features:* Durable, one-piece forged steel…

    $7.99
  7. Torx Driver T-25 2" (For #9 Screws) (2 per Pack)

    Torx Driver T-25 2" (For #9 Screws) (2 per Pack)

    These 2" bits are sized to drive #9 screws with the Torx six-point star-shaped head design and feature 1/4 hex shanks for easy use with a quick-change chuck. Pack of 2.

    $8.39
  8. Torx Driver T-15 2" (For #6 and #8 Screws) (2 per Pack)

    Torx Driver T-15 2" (For #6 and #8 Screws) (2 per Pack)

    These 2" bits are sized to drive #6 and #8 screws with the Torx six-point star-shaped head design and feature 1/4 hex shanks for easy use with a quick-change chuck. Pack of 2.

    $8.39
  9. Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

    Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

    …plug sizes. With 1/4" hex shank on all cutters to fit quick-change chuck (sold separately). The Plug Cutter is intended for use on a drill press or similar stationary machine. Hex shank can be used in keyed, keyless and quick-change chucks. Features:* Made from heat treated steel for extended tool…

    18 Review(s)
    From: $14.99
  10. Insty-Drive Drill Bit Adapter Set

    Insty-Drive Drill Bit Adapter Set

    Convert standard round shank drill bits and rotary tools into quick-change tools. * With 1/4" hex power bit shanks.* Works with Rockler/Insty-Drive Quick-Change Chuck (#69015). Includes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4" drill bit adapters, plus 1/8" hex wrench. * 2,500 RPM maximum.*…

    0 Review(s)
    $18.49
  11. High Speed Steel Countersink

    High Speed Steel Countersink

    Make quick, accurate chamfers in wood, metal and other materials.* 1/4" shank, single flute, and 82° angle.* Fits quick-change chuck (#69015). For countersinking, chamfering or deburring the rim of a hole in wood, plastic or soft metals. Single edge is hardened and sharpened for highly efficient…

    5 Review(s)
    $14.99
  12. 3-Piece Mortise Chisel Sharpening Set

    3-Piece Mortise Chisel Sharpening Set

    …including carbide.* Cone shape puts the final edge on inside bevels.* Sharpens mortising chisels up to 1/2" size.* Set includes handle, 1/4" quick-change chuck, 2 diamond cones (coarse and fine grit). Please Note: We have lowered the price of our current inventory due to some slight blemishing that…

    20 Review(s)
    $49.49
  13. Fuller 1/4'' Quick Change Taper Drill Set

    Fuller 1/4'' Quick Change Taper Drill Set

    Our top-line taper drill set with quick-change chuck allows you to quickly and efficiently pre-drill, countersink, counterbore and cut plugs.* Includes 3/8" shank quick-change chuck, five 1/4" shank countersinks with tapered drill bits, two stop collars, two 1/4" shank plug cutters (3/8" and 1/2"),…

    1 Review(s)
    $169.99
  14. Festool Centrotec® Bit Holder BHS 65mm

    Festool Centrotec® Bit Holder BHS 65mm

    …bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ? pound, and the length is reduced by nearly 1-1/2" with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system.

    $25.00
  15. Kreg Quick Change Kit

    Kreg Quick Change Kit

    …innovative Quick-Change Chuck, a 6" long #2 Square Driver, and thenew 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench). Additional features:* All new 3/8" Hex-Shank Step Drill Bit snaps directly into the Quick Change Chuck– no need for a bit adaptor.* Innovative chuck

    4 Review(s)
    $29.39
  16. Festool Centrotec® Hook Driver/ Adapter

    Festool Centrotec® Hook Driver/ Adapter

    …bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ? pound, and the length is reduced by nearly 1-1/2" with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system.

    $16.00
  17. Kreg Jig® HD Drill Bit

    Kreg Jig® HD Drill Bit

    …and a one-piece stepped profile for fast, accurate one-plunge drilling. Technical Details:* 1/4" Hex-Shank for use with quick-change chuck.* Also works with standard chucks.* 1/2" diameter.* High-speed steel.* Rugged one-piece, hardened steel construction. * For use with the Kreg Jig® HD Heavy…

    1 Review(s)
    $19.99
  18. Festool T15 Lithium Ion Cordless Drill Set (564522)

    Festool T15 Lithium Ion Cordless Drill Set (564522)

    …The eccentric chuck places bits flush to the side of the drill casing, letting you work directly adjacent to walls. Both chucks rotate 360° and lock firmly at 16 preset positions. The 1/2'' keyless chuck and Centrotec chuck system are also included. The Centrotec chuck offers quick-change

    $585.00
  19. Festool T18 Lithium Ion Cordless Drill Set (564524)

    Festool T18 Lithium Ion Cordless Drill Set (564524)

    …The eccentric chuck places bits flush to the side of the drill casing, letting you work directly adjacent to walls. Both chucks rotate 360° and lock firmly at 16 preset positions. The 1/2'' keyless chuck and Centrotec chuck system are also included. The Centrotec chuck offers quick-change

    $635.00
  20. Festool T15 Lithium Ion Cordless Drill (564521)

    Festool T15 Lithium Ion Cordless Drill (564521)

    …range of optional chucks, including a right-angle or eccentric chuck (sold separately, 72368 and 72727). The included 1/2'' keyless chuck secures standard bits with a firm gripping action that eliminates runout, while the included Centrotec chuck gives you quick-change capability with…

    $460.00
  21. Festool T18 Lithium Ion Cordless Drill (564523)

    Festool T18 Lithium Ion Cordless Drill (564523)

    …range of optional chucks, including a right-angle or eccentric chuck (sold separately, 72368 and 72727). The included 1/2'' keyless chuck secures standard bits with a firm gripping action that eliminates runout, while the Centrotec chuck system gives you quick-change capability with…

    $510.00
  22. Drill Doctor® 750X Bit Sharpener

    Drill Doctor® 750X Bit Sharpener

    …bits - up to 3/4" - and offers additional custom flexibility.* Sharpens 3/32"-3/4" bits with one heavy-duty chuck.* With durable metal sharpening and split-point ports.* Quick-change diamond sharpening wheel. Sharpen dull and broken drill bits in less than 60 seconds, including high-speed steel,…

    7 Review(s)
    $139.99
  23. Nova Live Center System With Stepped Cone

    Nova Live Center System With Stepped Cone

    …Fits all lathes with a standard #2 morse taper tailstock quill. * Versatile - over 6 mounting options in one handy unit.* Morse taper allows quick-change capability for fast setups.* Durable, high-quality triple bearing system.* Fits all lathes with standard #2 morse taper (2MT) tailstock quill.*…

    $73.49
  24. Pocket Hole Quick Change Adapter Set

    Pocket Hole Quick Change Adapter Set

    …of your fingers. This set has everything you need for quick-change drilling and saves you money! The Insty-Bit® 3/8" Shaft Adapter makes your pocket hole drill bit compatible with the Insty-Bit® 1/4" Professional Quick Change Chuck system (included). Also includes a 6" #2 Square Drive…

    9 Review(s)
    $23.67
  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
Feedback X